VR Mobile Crane Simulator Announced from ITI
Industrial Training International (iti.com), a world leader in training and technical services regarding cranes, rigging, lift planning and rigging engineering has announced the development of a virtual reality (VR) mobile crane simulator product which it plans to formally unveil at CONEXPO (www.conexpoconagg.com) in March 2017.
Prior to ITI's customer meeting, it had developed strong ties with two organizations as it began investigating the VR space, "We have been interested in simulation-based training solutions for several years and had nearly purchased our own simulators to distribute to customers and use in training. We principally decided against these investments as we didn't believe existing simulators would deliver enough value to our customers at the costs required mainly due to high price points and the inability to process enough trainees in a given year because of general immobility. A survey we conducted earlier this year asked simulator owners their opinions about their experience and they reflected negatively on a few aspects we hope to remedy with our VR simulator development," ITI President Zack Parnell reflects.
The main customer complaints that ITI hopes to remedy with its approach to simulation include:
Price Point - The high-price of simulators were a driving factor in why most have not purchased a simulator in the past according to ITI's research. High price points, though typically overcome by quality or high-utilization, have remained in the crane simulator business due to a limited supply of crane simulator manufacturers and the high-cost hardware sales approach that requires the customer to pay a front-loaded price like buying a car with cash. ITI has mimicked its e-learning distribution approach in which customers pay for actual course or simulation use, a subscription approach, identical to most successful software companies. The hardware is distributed very near actual costs of the VR headset and controls. This approach benefits the customer and ITI in a growing ecosystem by allowing ITI to continue to develop additional courses and course updates at no additional cost to the customer.
Minimal Use - In ITI's research, existing owners of simulators tended to agree that they were unable to achieve sufficient utilization of their simulators. ITI has also found this to be true in its qualitative research and associates the problem to the high cost of existing simulator products which make it difficult for employers to purchase multiple units and provide adequate access to their workforce, as well as very poor user experience of smaller, mobile units that utilize a small screen-display.
Overall Quality & Customer Satisfaction Score - Respondents in ITI's research who own simulators produced a Net Promoter Score of -16%, a metric that benchmarks overall quality and customer satisfaction on a scale of -100% to +100% by asking "How likely would you recommend this product to others?". ITI's other core businesses have much higher NPS scores, for instance, its Training Centers have experienced Student NPS above 70% over a two-year period. Additional quality and customer satisfaction issues, outside of those mentioned above, have included a generally poor user experience visible in the following respondent comments:
Crane simulators are so unrealistic - my field of vision is so limited that I cannot see the boom tip.
Our simulator is nothing like a real crane cab. It is a toy.
It gets our trainees only 5% of the training they need and we can't get everyone needed to the office it sits in so we've been pretty frustrated with the ROI.
In addition to its customers, ITI had learned a great deal from experts in the VR industry prior to deciding on the large development investment. Serious Labs, Inc. (www.seriouslabs.com, SLI) has been selected as ITI's development partner for a planned library of crane and rigging-related simulations that has commenced in August of 2016 with the mobile crane simulator. SLI, with offices in Edmonton and Calgary, has deep expertise in the serious game genre and virtual reality simulation.
"As VR was becoming commercially viable earlier this year with Oculus Rift and others headset manufacturers, we began looking for experts on the cutting-edge of that space as we believe the user experience and low distribution cost of VR makes it a winner for our customers. We could not have found a better partner than Serious Labs," commented Mr. Parnell.
Serious Labs, Inc. develops advanced simulator and game-based training systems for high-stake jobs in the global construction, mining, and oil and gas industries. ITI and SLI aim to overhaul the mobile crane simulator business with three main objectives:
Provide an incomparable, totally immersive user experience.
Remove barriers to entry with a subscription model and low capital costs.
Open up simulator training to all applicable team members by making access and utilization simpler than ever before.
These deliverables will be accomplished through the following features:
Growing Course Library - In addition to the initial simulations available in the library, additional planned simulations include overhead cranes, tower cranes, rigging, and assembly/disassembly of cranes.
Equipment - The ITI Mobile Crane Simulator leverages the technology of VR to allow a fully immersive experience that lays two inches away from the user's eyes.
Desktop & Motion-Base Versions - Two hardware models are available a fully mobile desktop version and an immersive, though still mobile, Motion-Base Simulator.
Learning Management & LMS Integration - Integrate ITI VR training with your current learning management system enabling employee training paths, and could be used for candidate screening, operator qualification, and record keeping.
ITI VR is currently deep into the "development" phase of the project with operating prototypes currently available. ITI will provide a "first look" at its VR Simulator at the upcoming SC&RA Crane & Rigging Workshop Product Fair, Thursday, September 22 in National Harbor, Maryland. For more information and to register visit the event website.
ITI is accepting reservations for both hardware models at this time. Both the Desktop and Motion-Base hardware packages can be reserved for $1,000. A Beta-Version Reservation is also available in which customers can immediately receive their computer system and Oculus Rift VR headset to participate in the development process by experiencing the simulations in development.
The official product launch will take place in March 2017 at the ITI Exhibit at CONEXPO-CON/AGG (conexpoconagg.com/) in Las Vegas.
For more information, visit www.iti.com/vr or contact Caleb Steinborn, E-Learning Specialist at ITI, at firstname.lastname@example.org.
Topics: mobile crane operator training, virtual reality, simulator, vr
Industrial Training International (iti.com), is a world leader in training and technical services regarding cranes, rigging, lift planning and rigging engineering.
- Industrial Training International
- 9428 Old Pacific Hyw., Woodland, Washington 98674
- Jonah Hobson, Director of Customer Success, email@example.com
This release was published on openPR.
Permanent link to this press release:
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release VR Mobile Crane Simulator Announced from ITI here
News-ID: 398526 • Views: 653
More Releases for ITI
Global Coconut Milk Market 2018 - CHI, Ducoco, Edward & Sons, iTi Tropicals
Apex Market Reports, recently published a detailed market research study focused on the “Coconut Milk Market” across the global, regional and country level. The report provides 360° analysis of “Coconut Milk Market” from view of manufacturers, regions, product types and end industries. The research report analyses and provides the historical data along with current performance of the global PP Pipe industry, and estimates the future trend of Coconut Milk on
Silicon Nitride Ball Market 2017- Toshiba, CoorsTek, Hoover Precision, ITI
Apex Market Reports, recently published a detailed market research study focused on the "Silicon Nitride Ball Market" across the global, regional and country level. The report provides 360° analysis of "Silicon Nitride Ball Market" from view of manufacturers, regions, product types and end industries. The research report analyses and provides the historical data along with current performance of the global Silicon Nitride Ball industry, and estimates the future trend of
Vietnam Motorbike Tours - the ITI-HOLIDAY Prize Draw
Guided Vietnam motorbike tours are available at the new tour programs of ITI-HOLIDAY since 2016. To introduce the adventure tours by motorbike in the Southeast Asian country, the tour operator provides a prize draw where ones can win among other prize a brand new Smartphone "Samsung GALAXY S7". ITI-HOLIDAY offers for their customers since 2009 private trips to Vietnam, Laos and Cambodia, which are specifically tailored to whose wishes and
16th ITI Symposium promotes network-based product development
Integrated System Simulation at the Dawn of ‘Industry 4.0’ Dresden, August 22, 2013 – ITI GmbH, one of the global leaders in CAE and system simulation, today published the official program for its 16th ITI Symposium running from November 12 through 13, 2013, at the International Congress Center Dresden. This year’s event revolves around “Network-Based Product Development” and lays the focus on cross-industry applications of ITI’s simulation software SimulationX. More than
User and technology congress for system simulation in Dresden-ITI invites to 13t …
Dresden, 31st August 2010 – ITI, one of the leading software and engineering companies for system simulation, is pleased to announce the dates of the 13th ITI Symposium to be held at the International Congress Center in Dresden on November 24th and 25th, 2010. Customers, partners and prospects can expect top-class user speeches from industry and research, innovative solution concepts, hands-on courses and inspiring discussions. Experienced ITI engineers and software
New Software Version Revolutionizes Modeling Processes - ITI launches Simulation …
Dresden, Germany 29 January 2010 - ITI, international innovation leader in virtual system engineering, today announces the release of the latest version of SimulationX, the software standard for physical modeling of mechatronics systems. Version 3.3 provides numerous functional enhancements and will be available with on demand software licensing for the first time. With the new release ITI again lives up to its name of developing the best simulation tools in