Press release
Efficient energy utilization: a key role in battery management systems - YMIN Capacitor
01 The important role of capacitors in energy storage BMS systems
Capacitors are important components in battery management systems. They mainly play the role of filtering, energy storage, voltage balancing and soft starting to prevent the impact of excessive current on other electronic components during startup, thereby extending the service life of the components.
02 Advantages of YMIN capacitors in energy storage BMS systems
YMIN capacitors have the following characteristics in the field of battery management systems:
Strong ability to withstand large ripple currents:
The circuits in the battery management system will generate noise signals of various frequencies, and YMIN capacitors can filter these noises. The stable voltage after filtering is essential for the normal operation of electronic components such as chips and sensors in the battery management system. It can avoid component misoperation or damage caused by voltage fluctuations and improve the reliability and stability of the system.
Large capacity:
When the load in the battery management system requires a large current instantly, the capacitor can quickly release the stored energy to meet the instantaneous demand of the load. In some circuits that require fast response, such as the protection circuit in the battery management system, the energy storage capacitor can ensure that when the power supply voltage drops or is interrupted instantly, it can still provide short-term power support for the key circuit, ensure that the protection circuit can work normally, and promptly cut off the connection between the battery and the load to prevent the battery from being over-discharged or other faults.
Strong overvoltage resistance:
In a battery pack composed of multiple batteries connected in series, due to individual differences in the batteries, the voltage of each battery may be unbalanced. YMIN capacitors can be connected in parallel at both ends of each battery. Through their own charging and discharging characteristics, they can shunt the batteries with higher voltages to reduce their voltages, and charge the batteries with lower voltages to increase their voltages, thereby achieving voltage balance among the batteries in the battery pack.
03 YMIN solid-liquid hybrid capacitor selection recommendation [https://www.ymin.cn/chip-hybrid-aluminum-electrolytic-capacitor-vgy-product/]
Image: https://www.ymin.cn/uploads/56566.jpg
04 YMIN Liquid Chip Capacitor Selection Recommendation [https://www.ymin.cn/chip-miniature-type-aluminum-electrolytic-capacitor-v3m-product/]
Advantages: thin, high capacity, low impedance, and high ripple resistance.
Image: https://www.ymin.cn/uploads/3.jpg
05 YMIN Liquid Lead type Capacitor Selection Recommendation [https://www.ymin.cn/lead-type-miniature-aluminum-electrolytic-capacitor-lkl-product/]
Image: https://www.ymin.cn/uploads/4445451.jpg
Media Contact
Company Name: Shanghai Yongming Electronic Co., Ltd.
Email:Send Email [https://www.abnewswire.com/email_contact_us.php?pr=efficient-energy-utilization-a-key-role-in-battery-management-systems-ymin-capacitor]
Country: China
Website: https://www.ymin.cn/
Legal Disclaimer: Information contained on this page is provided by an independent third-party content provider. ABNewswire makes no warranties or responsibility or liability for the accuracy, content, images, videos, licenses, completeness, legality, or reliability of the information contained in this article. If you are affiliated with this article or have any complaints or copyright issues related to this article and would like it to be removed, please contact retract@swscontact.com
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Efficient energy utilization: a key role in battery management systems - YMIN Capacitor here
News-ID: 3865805 • Views: …
More Releases from ABNewswire
How does nickel foam perform at high temperatures?
Nickel foam [https://www.beihaicomposite.com/porous-foam-metal-series-nickel-foam-product/] exhibits excellent high-temperature resistance. In air, it remains stable at temperatures below 300 degrees C without significant oxidation or structural changes. When temperatures rise to 400-600 degrees C, an oxide layer gradually forms on the surface, but the internal structure remains intact. At temperatures exceeding 600 degrees C, oxidation accelerates, and the Nickel [https://www.beihaicomposite.com/nickel/] layer may become brittle due to oxidation, affecting mechanical properties. Under inert gas…
3D Copper Foam Foil - Solving the Problem of Heavy Solid-State Batteries
Foam copper foil (also known as "3D copper foil") is a new type of three-dimensional porous, uniformly interconnected foam metal material characterized by lightweight, high strength, and excellent electrical conductivity. In recent years, with the development of battery technology, particularly the emergence of solid-state and semi-solid-state batteries, foam copper foil has garnered significant attention and application in the field of lithium-ion battery anode current collectors. The lightweight and high specific…
Purification Mechanisms of Foam Ceramic Filters
I. Sieving-Filter [https://www.beihaicomposite.com/filter/] Cake-Deep Bed Filtration Mechanism
1. Sieving (Screening): This mechanism follows the principle of traditional fiberglass mesh filtration, acting like a sieve to block inclusion particles and their agglomerates larger than the filter's surface pores from passing through.
2. Filter Cake Filtration: Many inclusions larger than the filter's pores are captured at the filter's inlet end through sieving. As the number of captured inclusions increases, a "filter cake" composed of…
The properties of aluminum foam and its current applications in the construction …
Aluminum Foam [https://www.beihaicomposite.com/aluminum-foam-tag/] has a high heat resistance, and does not melt even at the alloy's melting point. The melting temperature range for general aluminum alloys is between 560~700, but aluminum foam [https://www.beihaicomposite.com/] does not melt even when heated to 1400. Furthermore, it does not release harmful gases at high temperatures, and in many cases, it can replace foamed resins and asbestos products as a thermal insulation and heat-resistant Material…
More Releases for YMIN
Micro engines drive the future: YMIN ceramic capacitors' high-frequency innovati …
As electronic devices move towards high frequency and miniaturization, multilayer ceramic chip capacitors (MLCCs) have become the "invisible heart" of circuit design. With its independently innovative ceramic capacitor technology, Shanghai YMIN Electronics injects domestic core power into high-end fields such as new energy, AI servers, and automotive electronics with high-frequency filtering, ultra-low ESR, and military-grade reliability.
"Filter Guardian" for High-Frequency Scenarios
Modern electronic devices [https://www.ymin.cn/]have extremely high requirements for signal purity. YMIN…
The ideal energy storage solution for Bluetooth thermometers: YMIN supercapacito …
As Bluetooth thermometers develop toward intelligence and wirelessness, the convenience and functionality of the device have significantly improved. However, the shortcomings of traditional batteries in terms of battery life, instantaneous current output, and size have become bottlenecks for its further development. Traditional batteries are difficult to meet the needs of high-frequency communication, and their large size hinders the miniaturization design of equipment.
01 YMIN supercapacitor provides ideal energy supply for Bluetooth…
Key Component for Enhancing Energy Storage Inverter Efficiency - YMIN Capacitors
01 The Critical Role of Inverters in the Energy Storage Industry
The energy storage industry is an indispensable part of modern energy systems, and inverters play a multifaceted role in contemporary energy storage systems. These roles include energy conversion, control and communication, isolation protection, power management, bidirectional charging and discharging, intelligent control, multiple protection mechanisms, and strong compatibility. These capabilities make inverters a vital core component of energy storage systems.
Energy storage…
Key to Power Stability in AI Data Servers: The Application of YMIN Capacitors
Power Requirements for AI Servers
With the rise of AI and high-performance computing, components in servers, such as processors and GPUs, demand increasingly higher power. This necessitates stricter requirements for server power supplies and related components.
Servers generally need to maintain an average mean time between failures (MTBF) of over 60,000 hours, provide wide voltage input, and ensure stable voltage and current output without downtime. During peak and valley fluctuations in data…
YMIN Conductive Capacitors For AC/DC Converters Using GaN
With the gradual maturation of gallium nitride (GaN) technology, an increasing number of AC/DC converters are adopting GaN as switching elements to replace traditional silicon components. In the application of this new technology, conductive capacitors also play a crucial role.
YMIN has long been committed to the development of conductive capacitors for use in GaN-based AC/DC converters and has achieved successful applications across multiple industries, such as fast charging (from the…
Ymin Capacitor: The Stable Choice For Electric Power Steering (EPS) Systems In A …
With the increasing demand for environmental friendliness, energy efficiency, and safety in automobiles, Electric Power Steering (EPS) is gradually replacing hydraulic power steering systems due to its numerous absolute technical advantages.
EPS Working Principle
The basic principle of EPS is to connect the torque sensor to the steering shaft. When the steering shaft operates, the torque sensor starts working, converting the relative steering angle displacement between the input shaft and the output…
