Press release
CeBIT 2008 - iDTRONIC introduces the New EzMultiX RFID Gate Antenna
RFID Gate Antenna iDTRONIC EzMultiX
iDTRONIC’s EzMultiX ISO 15693 LR antenna set is a high performance solution especially designed for modern RFID applications. Each side of the gate contains two small antennas, which allow tags to be read no matter how they are oriented. The LR Reader/Writer automatically controls the switching between the four individual antennas
The EzMultiX Antenna Gate is very attractively designed with a robust silver metal housing and white acrylic side panels. Red signal lamps indicate the reading of a tag. . It is possible to obtain reading distances of up to 140cm (depending on tag type and antenna configuration).
The EzScan LRM Long Range Reader is a high-performance HF Long Range reader operating at 13.56MHz. It supports different standalone modes, including EAS (Electronic Article Surveillance), to meet a wide range of application requirements. It is easily configured via four function keys on the reader. iDTRONIC’s Read/Write device for ISO 15693 transponders (ISO 18000-3) has an integrated 4 channel multiplexer for the direct connection of up to 4 antennas. The reader has a maximum output power of 8 Watts. Various input and output ports are available, including both RS232 serial and/or USB interfaces.
This matched set of devices are suitable for many RFID applications, including Time and Attendance, Access Control, and Event Management environments. In addition, the reader is field upgradeable to support future protocols.
The EzMultiX Antenna & EzScan LRM set supports all major ISO 15693 transponders, including Infineon my-d, TI Tag-it HFI, NXP I•CODE SLI and Legic Advant ATC-MV chipsets.
“IDTRONIC’s new EzMultiX Antenna Gate fits perfectly with our Long Range Reader LRM for all high performance Access Control and Time and Attendance Systems” commented Roger Kochendoerfer, Chief Executive Officer of iDTRONIC.
For more information about this new EzMultiX Antenna Gate for HF and all other HF Longe Range products, email readers@idtronic.de or visit our website: www.idtronic-rfid.com.
Press contact:
iDTRONIC Electronic Identification
Andreas Jaeger
Donnersbergweg 1
67059 Ludwigshafen am Rhein
Germany
Phone: +49 621 66 90 09 – 46
Fax: +49 621 66 90 09 – 49
eMail: andreas.jaeger@idtronic.de
Internet: www.idtronic-rfid.com
About iDTRONIC Electronic Identification GmbH
iDTRONIC develops and sells innovative RFID hardware components for product identification, data collection and access control. iDTRONIC’s products are distributed worldwide through a global network of partners.
The product portfolio includes ISO Cards, Keyfobs, Tags, RFID Readers, Mobile & Handheld Readers, UHF Long Range Readers, and Active Tag Systems. iDTRONIC offers a wide range of personalization options for their products. iDTRONIC RFID products are available for the 125kHz, =13,56MHz, and UHF frequencies
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release CeBIT 2008 - iDTRONIC introduces the New EzMultiX RFID Gate Antenna here
News-ID: 38496 • Views: …
More Releases from iDTRONIC Electronic Identification GmbH
iDTRONIC presents itself at Euro ID and RFID Journal 2011
As a leading manufacturer and supplier of innovative and professional RFID hardware iDTRONIC show the Highlights of their products at the Euro ID in Berlin on 5 - 7 April and at the RFID Journal in Orlando on 12 - 14 April.
iDTRONIC's innovative RFID products are available for passive RFID standards LF 125kHz, HF 13.56 MHz and UHF 868 MHz. The product range is complemented by an active system,…
PRESS RELEASE, Successful CeBIT 2011 from the company iDTRONIC
The CeBIT 2011 was a complete success for iDTONIC. The company, a leading, international supplier of RFID hardware, reported on its modern, newly designed booth a great demand for its innovative RFID product portfolio.
iDTRONIC GmbH presented in Hall 7 the following product innovations and core competencies:
• Complete RFID hardware product range for system integrators
• BLUEBOX stationary controllers, readers and antennas for LF, HF, UHF and Active
• Mobile data terminals with integrated iDTRONIC…
iDTRONIC presents his new BLUEBOX UHF Mid Range Controller
iDTRONIC, a leading supplier for RFID Hardware, introduces his BLUEBOX UHF Mid Range Controller. The BLUEBOX UHF Mid Range Controller is available with internal antenna or with external antenna. Both devices are suitable for UHF 865-915MHz use and suitable for ETSI and FCC operation. The BLUEBOX UHF Mid Range Controller is able to read / write ISO18000-6 C Tags including EPC Gen2 at a distance of up to 3 meters.…
iDTRONIC at CeBIT 2011
The Cebit in Hannover will be taking place from 01.03.2011 till 05.03.2011.
As a leading manufacturer and supplier of innovative and professional RFID hardware, we invite you to visit us in Hall 7 Stand D19.
iDTRONIC's innovative RFID products are available for passive RFID standards LF 125kHz, HF 13.56 MHz and UHF 868 MHz. The range of products is complemented by an active system, which also operates on the UHF 868 MHz…
More Releases for RFID
RFID Readers Market Growth by 2027 | Fixed RFID Readers, Integrated RFID Readers …
Future Market Insights (FMI) has published a new research report titled “Radio Frequency Identification (RFID) Readers Market: Global Industry Analysis (2012-2016) and Opportunity Assessment (2017-2027).” The report states that the growing penetration of advanced technology along with increasing supply chain complexities are encouraging consumers to adopt RFID technology. Owing to this, players operating in the RFID readers market are incessantly upgrading their product portfolios in order to meet the demands…
Global RFID Tag Chips Market by Type, HF RFID Chip, UHF RFID Chip, LF RFID Chip, …
This study report Global RFID Tag Chips Market, the analyst provides growth estimates, forecasts, and an in-depth analysis of all key factors at play in the Market. The report takes into account the micro and macro factors that are likely to impact the growth trajectory of the Market. The study further presents details on the investments initiated by several organizations, institutions, government, and non-government bodies.
The report investigates and analyzes the…
RFID Equipment Market - The Rising Application of RFID In Healthcare RFID Techno …
The applications of Radio Frequency Identification (RFID) have widened in the healthcare industry, ranging from tracking medical equipment, patient identification and blood transfer monitoring to tracking the path of medication from pharmacy to the patient. Due to this, the RFID equipment market has witnessed a high growth rate over the years.
Providing clients with in-depth analysis and competitive intelligence, the research report evaluates the RFID equipment market and all…
RFID Tag Chip Market: By Applications - HF RFID Tags, UHF RFID Tags, LF RFID Tag …
Latest industry research report on: Global and United States RFID Tag Chip Market | Industry Size, Share, Research, Reviews, Analysis, Strategies, Demand, Growth, Segmentation, Parameters, Forecasts
Request For Sample Report @ https://www.marketresearchreports.biz/sample/sample/1227953
This report studies the RFID Tag Chip market status and outlook of global and United States, from angles of players, regions, product types and end industries; this report analyzes the top players in global and United States market, and splits…
rfid clear tag for rfid inventory (gyrfidstore)
RFID Disc Tags are widely used for inventory tracking system or Automatic production systems. The RFID Disc Tag can also work on metal surface with anti-metal layer on it, also can be attached to goods surface by adhesive layer. There are abundant size options from 12mm to 50mm. GYRFID presents several types with different material and size to suitable customer’s application.
DIP Series- PVC Disc Tag, PVC Laminated, thickness of 1.0-1.2mm
DIT…
windshield rfid tag for rfid solutions(gyrfidstore)
The strength of RFID label or RFID Stickers compared with other tags is the thinner thickness, various size, flexible and cost efficient. It can be sealed inside of goods or stick on the device surface with adhesive layer. The label is also optional with anti-metal layer to mount and working on metal surface. GYRFID Provides different types Stickers to meet the requirement for different applications such as NFC Payments,…
