SKSHU Paint: SGW820 Thermoplastic Polyolefin (TPO) Pre-applied Waterproof Membrane

The SGW820 Thermoplastic Polyolefin (TPO) Pre-applied Waterproof Membrane takes TPO homogeneous sheet as the main waterproof layer, and features a self-adhesive layer and an anti-stick protective layer on the material. Adopting a pre-application method, as well as hot air welding for lap joint edges, it does not need any additional layer or protective layer. As such, it is simply called TPO pre-applied waterproof membrane. After reaction and consolidation with liquid concrete slurry, the waterproof layer can form non-gap bonding with concrete structures, thus effectively improving the reliability of waterproof systems.

Image: https://www.abnewswire.com/upload/2025/01/002c0d83ec58311a29c0683687df237a.jpg

Product Features

Green and environmental-friendly: There are no solvents or harmful additives in the formulation of thermoplastic polyolefin sheets and macromolecular self-adhesive layers. No harmful substances are emitted in the production, storage, transportation and application processes, and no pollution is caused to the environment

Convenient application: Application can be done all year round, and other construction work can proceed normally after the application of the product

Good anti-bonding effect: The membrane can form permanent bonding with the post-cast concrete structure layer and its waterproof performance is not affected by substrate subsidence and deformation, thus improving the reliability of the waterproof layer.

Hot air welding is adopted for application, with high reliability of lap sealing.

Excellent resistance to chemical corrosion: Resistant to acid, alkali and salt corrosion, resistant to algae, mold and other microbial growth

Composed of thermoplastic polyolefin sheet and synthetic macromolecular hot-melt pressure-sensitive adhesive, the product has excellent properties such as high tensile strength, high elongation, resistance to impact, tear and chemical corrosion and dimensional stability against thermal aging.

Application

Plane construction

Clean substrate right snap the line on substrate right lay pre-applied anti-stick membrane right handle overlaps right treatment to details right cast protective layer of fine aggregate concrete (if necessary) right tie reinforced bars right cast concreteVertical construction

Install facade support right snap the line on substrate right lay pre-applied anti-stick membrane right fix membrane through auxiliary mechanical means right handle overlaps right treatment to details right tie reinforced bars right cast concrete to vertical surface

Key points of construction

The membrane can be directly applied to a wet substrate without visible water, but the substrate should be flat, firm, and free of obvious ponding.

Hot air welding at lap joints: Clean the membrane welding area, and use an automatic welding machine (or hand-held welding gun) for hot air welding.

Transportation & Storage

During storage and transportation, products of different types and specifications should be stacked separately to avoid sunlight and rain, pay attention to ventilation, and the storage temperature should not be higher than 45. The horizontal storage height should not exceed five layers. Contact with acid, alkali, oil and organic solvents is prohibited.

Prevent inclining or cross-squeezing during transportation, and cover with felt cloth if necessary.

Under normal storage conditions, the storage period of the product is one year from the date of production.

Media Contact
Company Name: SKSHU Paint Co., Ltd..
Email:Send Email [https://www.abnewswire.com/email_contact_us.php?pr=skshu-paint-sgw820-thermoplastic-polyolefin-tpo-preapplied-waterproof-membrane]
Phone: +86 0594 2761989
Address:Headquarter: 518 Liyuan North Avenue, Licheng District
City: Putian
State: Fujian, 351100
Country: China
Website: https://www.3treesgroup.com/en/



This release was published on openPR.