Why Do Watches Stop Running? Common Causes and Solutions

Introduction

Image: https://www.naviforce.com/uploads/naviforce-watch.png

"Why does my watch stop running after a while, or why does my watch run fine during the day but slow down by a few minutes or even hours overnight?"

What causes this? Is the watch malfunctioning? In fact, this is a phenomenon known as watch stopping or watch skipping.

This comprehensive guide from NAVIFORCE Watch explains the common causes of watch stopping and provides practical solutions.

What is Watch Stopping?

Watch stopping refers to a phenomenon where a watch suddenly stops running or runs intermittently despite having sufficient power. Some watches may stop while being worn but work perfectly when placed on a table. Others might work fine throughout the day but lose time overnight.

These are all examples of watch stopping issues.

Types of Watches and Their Stopping Issues

Mechanical Watches [https://www.naviforce.com/automatic-mechanical-watch/]

Image: https://www.naviforce.com/uploads/watch-stopping.png

Power Reserve Issues

Cause: Automatic mechanical watches use arm movement to wind themselves. If not worn for a long time or if daily activity isn't enough, the mainspring may not wind fully, causing inaccurate timekeeping or a complete stop.

Solution: This issue is usually caused by insufficient power reserve. The solution is simple: before storing the watch, perform a small motion to wind it or use the manual winding function to ensure the watch has enough power to continue working.

Impact Damage

Cause: Watches are often worn exposed to external elements, and accidental bumps or shocks can cause internal gears or components to loosen or misalign, resulting in the watch stopping intermittently.

Solution: If the watch is bumped, take it to a professional repair center for inspection. To prevent damage, avoid bumping, dropping, or vigorous activity, and remove the watch during workouts.

Hairspring Problems

Cause: Too little activity depletes the power reserve, while too much movement can over-tighten the mainspring, causing a halt, often between 9 PM and midnight, and affecting the date function.

Solution: If the balance spring in a watch is deformed or broken, it is best to take it to a professional watch repair shop for replacement.

Other Issues

If none of the above solutions solve the problem, there might be other factors, such as magnetism, excessive oil buildup, or loose components, causing the watch to stop.

Solution: Professional servicing is required, as this process necessitates specialized knowledge and tools

Quartz Watches [https://www.naviforce.com/quartz-calendar-watch/]

Image: https://www.naviforce.com/uploads/watch-stopping1.png

Low Battery

Cause: When a quartz watch's battery is running low, it can cause the watch to stop due to unstable voltage supply.

Solution: Replace the battery promptly to avoid leakage or damage to the movement.

Magnetization

Cause: Exposure to magnetic fields can cause the watch hands to stick together, leading to irregular movement or stopping.

Solution: purchasing a demagnetizer or seeking professional assistance.

Bearing Damage

Cause: Worn or damaged bearings affecting movement

Solution: The movement may need to be replaced, so take the watch to a professional repair center.

Solar-Powered Watches [https://www.naviforce.com/solar-powered/]

Image: https://www.naviforce.com/uploads/watch-stopping2.png

Insufficient Light Exposure

Cause: Solar-powered watches rely on light energy to operate. If a watch is often kept in the dark or hidden under clothing, it can experience a lack of energy, causing it to stop.

Solution: Ensure that the watch is exposed to adequate light regularly. When not in use, store the watch in a bright place to keep it charged.

Aging Power Cell

As the power storage system ages, it may not be able to hold a charge properly, even with sufficient light exposure, leading to inconsistent timekeeping.

Solution: Regularly check the battery's charging efficiency, and if necessary, replace the power storage component.

Smart Watches [https://www.naviforce.com/smart-watch/]

Image: https://www.naviforce.com/uploads/watch-stopping3.png

Synchronization Issues

Cause: Smartwatches synchronize time via a smartphone app, with a slight 1-2 second delay possible. If the Bluetooth connection is lost, the watch may show a 5-second discrepancy after 24 hours. Prolonged disconnection from the app can also lead to time discrepancies.

Solution:

Check connection status in appReconnect BluetoothReset pairing if necessaryEnsure regular synchronization with smartphone

Solutions and Maintenance

NAVIFORCE as a manufacturer emphasizes the importance of proper watch care:

1. Preventive Measures

Keep away from electronic devices Maintain cleanliness Ensure water and dust resistance Follow regular maintenance schedule Replace batteries as recommended

2. Best Practices

Handle with care to avoid impacts Store properly when not in use Regular professional servicing Monitor performance regularly

Conclusion

At NAVIFORCE, quality is our priority. Every watch undergoes rigorous testing before leaving our factory. However, even the best timepieces require proper care and maintenance. Remember that a quality watch's value lies not just in its brand and appearance, but in its reliable service over time.

We continue to improve our manufacturing processes and product quality to provide more reliable timepieces. Thank you for choosing NAVIFORCE - we remain committed to maintaining your trust through excellence in watchmaking.

Image: https://www.naviforce.com/uploads/NAVIFORCE-Watch-Manufacturing.png

Media Contact
Company Name: Guangzhou NAVIFORCE Watch Co., Ltd.
Email:Send Email [https://www.abnewswire.com/email_contact_us.php?pr=why-do-watches-stop-running-common-causes-and-solutions]
Country: China
Website: https://www.naviforce.com/



This release was published on openPR.