openPR Logo
Press release

DB15 Transceiver A/B Switch Module with Open Frame Design for Rackmount Installation

11-07-2016 01:22 PM CET | IT, New Media & Software

Press release from: Electro Standards Laboratories

DB15 Transceiver A/B Switch Module with Open Frame Design

Electro Standards Laboratories, Cranston, RI, introduces Model 9141 DB15 Transceiver A/B Switch Module with Slide Latch. This compact DB15 Switch Module provides quick connection to any one of two devices from one COMMON device without having to plug and unplug cables. This unit is also designed with an open frame to allow convenient installation into a Model 9025 Rack. This modular approach to switch system requirements allows expansion to more channels on an as-needed basis. The Model 9025 Rack can accommodate up to (8) of the Model 9141.

The Model 9141 requires no power and is a manually operated by a rotary switch on front panel to select position A or B. The unit is comprised of (2) DB15 female connectors with slide latches labeled A and B and (1) DB15 male connector labeled COMMON. All 15 pins of the DB15 interface are switched via a break-before-make rotary switch. The ports are transparent to all data. The switch is encased in a rugged aluminum enclosure for EMI/RFI shielding with a lifetime warranty against manufacturing defects.

For more information on the Model 9141, visit http://www.electrostandards.com/ProductDetail/?productid=179. Electro Standards’ staff of sales engineers can be reached at 401-943-1164 or via email at eslab@electrostandards.com.

Tina Corticelli/Media Manager
Electro Standards Laboratories
36 Western Industrial Drive
Cranston, RI 02921
Tel: 401-943-1164
Fax: 401-946-5790
Email: eslab@ElectroStandards.com
www.ElectroStandards.com

Manufacturer of Copper and Fiber Optic Network Switches, Cables Assemblies and Interface Converters.

Electro Standards Laboratories
36 Western Industrial Drive
Cranston, RI 02921

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release DB15 Transceiver A/B Switch Module with Open Frame Design for Rackmount Installation here

News-ID: 378855 • Views:

More Releases from Electro Standards Laboratories

Electro Standards' CellMite ProD Embedded Data Acquisition for High Traffic Network Applications
Electro Standards' CellMite ProD Embedded Data Acquisition for High Traffic Netw …
Electro Standards Laboratories of Cranston, RI is proud to present their newest commercial off the shelf smart sensor board, designed for embedded applications that require high speed and high accuracy analog and digital data acquisition. The CellMite ProD model 4349 is a high-performance embedded data acquisition and sensor monitoring node accessible via an ethernet network. This model creates both a low-speed monitoring data stream and a high-speed transient event
Electro Standards Labs Pathway® Model 7196 BNC Autoscan Security Monitor Switch …
Electro Standards Laboratories announces its Model 7196 BNC Switch with Auto-scan capability and both Manual Pushbutton and USB Serial Remote Control. Each channel of the Model 7196 allows access to six DVR/Camera networks from one laptop computer with the ability to control the switch from a remote location. The Switch also has the capability of automatically sequencing live images from all Video Monitors distributed throughout the building and/or area. Scan
HPMU, Hybrid Power Management Unit, The Portable Power Solution for Battery & Alternative Energy Systems
HPMU, Hybrid Power Management Unit, The Portable Power Solution for Battery & Al …
Scientists and engineers at ESL have developed a solution to improve performance of alternative energy systems and extend the life cycles of typical battery systems. The HPMU, Hybrid Power Management Unit combines the strength of a high-power capacitor and a high energy battery using a power management board to integrate the two. This combined technology enables the battery system to operate at a reduced rate with the recharge
The Model 7391 DB25 A/B Fallback Switch Provides a Solution for Network Redundancy
The Model 7391 DB25 A/B Fallback Switch Provides a Solution for Network Redundan …
Electro Standards has designed a solution to assist in eliminating network downtime with the Model 7391 DB25 AB Fallback Switch. When it’s mission critical to keep your data flowing, you have a secondary network or device to switch over to. When there is a problem with the primary network or device, if it involves plugging and unplugging cables to bring everything back online, this can be very time consuming and

All 5 Releases


More Releases for DB15

Newport’s New Metal-Cased, Wand-Style UV/Si Calibrated Photodetectors
Newport Corporation, a worldwide leader in lasers and photonics solutions that Make, Manage and Measure Light®, introduces the new family of 818-ST2 and 818-ST2-UV wand detectors. Designed with highly protective aluminum housing, the detectors operate from 200 to 1100 nm. The specifications are identical to Newport’s legacy 818-ST and 818-ST-UV Series which will be phased out in four months. Sturdy metal cases for both new products are
COMMELL Launches FE-97G PICMG 1.0 SBC With Atom N270
(TAIPEI, TAIWAN, 11 June 2010) Taiwan Commate Computer Inc. (COMMELL), the worldwide leader of Single Board Computers, unveils the PICMG 1.0 CPU Card FE-97G based on the Intel 945GSE Express Chipset, supports Intel Atom processor N270, implemented in 45nm technology, is power-optimized and delivers robust performance-per-watt for cost-effective embedded solutions. The board offers all interfaces required solution and embedded lifecycle support for the fast and easy development of embedded market
COMMELL Launches LP-170 Pico-ITX With Atom N450/D410/D510
(TAIPEI, TAIWAN, 05 MAY 2010) Taiwan Commate Computer Inc. (COMMELL), the worldwide leader of Single Board Computers, unveils the new industrial-grade Pico-ITX (10cm x 7.2cm) motherboard LP-170 based on the Intel Atom processor single core N450/D410 and dual core D510, implemented in 45nm technology, is power-optimized and delivers robust performance-per-watt for cost-effective embedded solutions, the N450 TDP rating is only 5.5Watts, D410 is 10W and D510 dual core is still
COMMELL Announces PICMG 1.3 SBC With Q45 Chipset
Taiwan Commate Computer Inc. (COMMELL), the worldwide leader of Single Board Computers that introduces the PICMG 1.3 System Host Board-Express (SHB) FS-A72 with higher bandwidth for PCIe ports. The FS-A72 based on Intel® Q45 Express chipset, which supports Intel® Core 2 Quad processor Q9400, Intel® Core 2 Duo processors E8400, E7400, E6400 and E4300, Intel® Dual-Core processors E5300 and E2160, and Intel® Celeron processor 440 @ 1333/1066/800 MHz System Bus,
Commell unveils HE-875P half-size pisa bus single board computer with Intel Atom …
(TAIPEI, TAIWAN, 05.07, 2009) Taiwan Commate Computer Inc. (COMMELL), the worldwide leader of Single Board Computers, unveils the PISA-bus Half-size CPU Card HE-875P based on the Intel 945GSE Express Chipset, supports Intel Atom processor N270, implemented in 45nm technology, is power-optimized and delivers robust performance-per-watt for cost-effective embedded solutions. The board offers all interfaces required solution and embedded lifecycle support for the fast and easy development of embedded market such
Commell announces LV-67A Mini-ITX for LGA775 processor with Q45 Chipset
(TAIPEI, TAIWAN, 06 APR 2009) -Taiwan Commate Computer Inc. (COMMELL), the worldwide leader of Industrial Mini-ITX main board, introduced the Mini-ITX LV-67A that incorporates an Intel LGA775 compatible pin-out with Intel Core 2 Quad processor Q9400, Intel Core 2 Duo processors E8400, E7400, E6400 and E4300, Intel Dual-Core processors E5300 and E2160, and Intel Celeron processor 440. The LV-67A platform based on Q45 Express chipset, is ideal for developing high-performance