NDIR CO2 Sensors Research:CAGR of 7.5% during the forecast period

QY Research Inc. (Global Market Report Research Publisher) announces the release of 2024 latest report "NDIR CO2 Sensor- Global Market Share and Ranking, Overall Sales and Demand Forecast 2024-2030". Based on current situation and impact historical analysis (2019-2023) and forecast calculations (2024-2030), this report provides a comprehensive analysis of the global Wire Drawing Dies market, including market size, share, demand, industry development status, and forecasts for the next few years.



NDIR gas sensors use the infrared absorption properties of gas molecules (e.g., CO2) to calculate their concentration. Therefore, the NDIR gas sensor is equipped with an infrared light source that emits infrared rays and an infrared sensor that detects infrared rays. The infrared light is directed at the gas in the measuring tube and part of the light is absorbed by the gas molecules to be measured. Subsequently, the rest of the infrared light hits the filter and reaches the infrared detector. Ideally, only the gas to be measured absorbs light of the corresponding wavelength. However, since the gas mixture contains a variety of gases, the absorption regions may overlap, thus enhancing cross sensitivity. The interference part must either be tested for compensation (to avoid false measurements) or avoided by clever selection of spectral ranges. With the NDIR sensor, more than 100 different gases can be detected from ppm to percentage. In many applications, this is the preferred method because the measurement method is non-contact and non-consuming.



【Get a free sample PDF of this report (Including Full TOC, List of Tables & Figures, Chart)】

https://www.qyresearch.com/reports/3337800/ndir-co2-sensor





NDIR CO2 Sensors Market Summary

NDIR gas sensors use the infrared absorption properties of gas molecules (e.g., CO2) to calculate their concentration. Therefore, the NDIR gas sensor is equipped with an infrared light source that emits infrared rays and an infrared sensor that detects infrared rays. The infrared light is directed at the gas in the measuring tube and part of the light is absorbed by the gas molecules to be measured. Subsequently, the rest of the infrared light hits the filter and reaches the infrared detector. Ideally, only the gas to be measured absorbs light of the corresponding wavelength. However, since the gas mixture contains a variety of gases, the absorption regions may overlap, thus enhancing cross sensitivity. The interference part must either be tested for compensation (to avoid false measurements) or avoided by clever selection of spectral ranges. With the NDIR sensor, more than 100 different gases can be detected from ppm to percentage. In many applications, this is the preferred method because the measurement method is non-contact and non-consuming.

Carbon dioxide (CO2) is an important gas with numerous connections to biological, atmospheric, oceanic, environmental, experimental, and industrial processes.

It exists in the earth's atmosphere at an approximate concentration of 0.0390% by volume or 390ppm. In May 2013, atmospheric concentration reached 0.04% or 400ppm for the first time in possibly millions of years. Carbon dioxide is a greenhouse gas because it inhibits outward thermal radiation from the earth - in other words, it traps heat.

Sources of CO2 are numerous. Natural sources include volcanoes, organic matter combustion, and respiration of living things, fermentation, and photosynthesis. Anthropogenic, or unnatural, sources primarily include fossil fuel burning, power generation, transportation, heating buildings & homes, and industrial processes such as iron & steel, cement, and chemical production. Deforestation also contributes to CO2 accumulation by removing a critical natural CO2 sink.

Carbon dioxide is a gas of interest in many analytical applications. Infrared detectors, also known as NDIR analysers, can be used to measure CO2 because it is an excellent absorber of infrared energy. Carbon dioxide can be measured in percent (%) and parts per million (ppm) depending on the requirements of the application.

The off-gas stream that results from steel-making applications, such as EAFs, contains carbon in the form of CO2. Some metal heat treat applications utilize CO2 as a part of the carbon-containing atmosphere. The CO2 levels can be dynamically measured in these cases and is usually present at percent levels. Measuring CO2 in these applications may be important for energy balance, end-point determination, and maintaining product hardness and quality.

Carbon dioxide is also a by-product of combustion. In combustion applications, such as boilers, furnaces, and heaters, CO2 measurement can be used with temperature and oxygen content to evaluate efficiency and burner performance. To tune a boiler for maximum efficiency and fuel savings, a portable CO2 analyser with measurement in the in the percent range is helpful.

Carbon dioxide is also a by-product of three of the four basic bio-chemical stages of landfill gas production. Measuring CO2 and methane (CH4) in landfill gas is useful for determining the gas quality. If the produced gas is burned in an engine, the exhaust products will also contain CO2. Measuring the CO2 in the engine exhaust using a flue gas analyser may also be useful in evaluating engine efficiency.

In the agricultural and food storage industries, CO2 plays a critical role in the growth of plants and the storage of produce. A controlled atmosphere of low oxygen and elevated CO2 is used to disinfect produce, prolong freshness, and control insect pests. Maintaining adequate CO2 levels in greenhouses will ensure proper plant growth and productivity.

The toxicity of CO2 is one reason why a reliable air quality monitor may be required in a facility. Furnaces, boilers, combustion engines, controlled atmospheres, and other processes may give off dangerous amounts of CO2. The Permissible Exposure Limit (PEL, by Time-Weighted Average as stated by OSHA) of CO2 gas is currently 5,000 ppm over 8 hrs. Therefore, an air quality monitor that can provide analysis at the ppm level is important.



Market Drivers:



D1: Increasing Demand for Air Quality Monitoring

The growing awareness of air quality and its impact on health has driven the need for air quality monitoring systems, particularly in indoor environments like offices, schools, hospitals, and homes. NDIR CO2 sensors are commonly used in these systems to monitor and control CO2 levels, ensuring a healthier living and working environment.



D2: Regulations and Standards

Governments and international organizations have implemented stringent regulations and standards regarding air quality and CO2 emissions. These regulations are driving industries to adopt more advanced CO2 monitoring systems, including NDIR sensors, to comply with environmental and safety standards.



D3: Rising Focus on Green Buildings and Energy Efficiency

There is an increasing focus on energy-efficient buildings (green buildings) that use smart HVAC (heating, ventilation, and air conditioning) systems to regulate indoor air quality while minimizing energy consumption. NDIR CO2 sensors play a vital role in controlling HVAC systems based on CO2 levels, thereby enhancing energy efficiency.



Global NDIR CO2 Sensors MarketSize(US$ Million), 2019-2030
241021-165902.webp (16 KB)

Above data is based on report from QYResearch: Global NDIR CO2 Sensors Market Report 2024-2030 (published in 2024). If you need the latest data, plaese contact QYResearch.



According to the new market research report "Global NDIR CO2 Sensors Market Report 2024-2030", published by QYResearch, the global NDIR CO2 Sensors market size is projected to reach USD 0.81 billion by 2030, at a CAGR of 7.5% during the forecast period.



Global NDIR CO2 Sensors Top23Players Ranking and Market Share (Ranking is based on the revenue of 2023, continually updated)
241021-165931.webp (31 KB)

Above data is based on report from QYResearch: Global NDIR CO2 Sensors Market Report 2024-2030 (published in 2024). If you need the latest data, plaese contact QYResearch.



According to QYResearch Top Players Research Center, the global key manufacturers of NDIR CO2 Sensors include Amphenol Advanced Sensors, Senseair (Asahi Kasei Microdevices), Murata, Sensirion, MKS Instruments, Vaisala, Teledyne API, Honeywell, ELT SENSOR, E+E, etc. In 2023, the global top 10 players had a share approximately 26.0% in terms of revenue.



NDIR CO2 Sensors,Global Market Size, Split by Product Segment
241021-165953.webp (19 KB)

Based on or includes research from QYResearch: Global NDIR CO2 Sensors Market Report 2024-2030.



In terms of product type, currently Multi-channel is the largest segment, hold a share of 60.0%.



In terms of product application, currently Residential and Commercial Security is the largest segment, hold a share of 50.0%.









The report provides a detailed analysis of the market size, growth potential, and key trends for each segment. Through detailed analysis, industry players can identify profit opportunities, develop strategies for specific customer segments, and allocate resources effectively.



The NDIR CO2 Sensor market is segmented as below:

By Company

Amphenol Advanced Sensors
Senseair (Asahi Kasei Microdevices)
Murata
Sensirion
MKS Instruments
Vaisala
Teledyne API
Honeywell
ELT SENSOR
E+E
Dwyer Instruments
Trane
Micro-Hybrid
Edinburgh Instruments
Alphasense
Cubic Sensor and Instrument
Nano Environmental Technology (N.E.T.)
Super Systems
ORIENTAL SYSTEM TECHNOLOGY
smartGAS Mikrosensorik
SST Sensing
Winsen
Suzhou Promisense



Segment by Type

Embedded NDIR CO2 Sensor
Non-embedded NDIR CO2 Sensor



Segment by Application

Industrial
Building Automation
Air Purifier
Automotive
Petrochemical
Others



Each chapter of the report provides detailed information for readers to further understand the NDIR CO2 Sensor market:

Chapter 1: Introduces the report scope of the NDIR CO2 Sensor report, global total market size (valve, volume and price). This chapter also provides the market dynamics, latest developments of the market, the driving factors and restrictive factors of the market, the challenges and risks faced by manufacturers in the industry, and the analysis of relevant policies in the industry. (2019-2030)

Chapter 2: Detailed analysis of NDIR CO2 Sensor manufacturers competitive landscape, price, sales and revenue market share, latest development plan, merger, and acquisition information, etc. (2019-2024)

Chapter 3: Provides the analysis of various NDIR CO2 Sensor market segments by Type, covering the market size and development potential of each market segment, to help readers find the blue ocean market in different market segments. (2019-2030)

Chapter 4: Provides the analysis of various market segments by Application, covering the market size and development potential of each market segment, to help readers find the blue ocean market in different downstream markets.(2019-2030)

Chapter 5: Sales, revenue of NDIR CO2 Sensor in regional level. It provides a quantitative analysis of the market size and development potential of each region and introduces the market development, future development prospects, market space, and market size of each country in the world..(2019-2030)

Chapter 6: Sales, revenue of NDIR CO2 Sensor in country level. It provides sigmate data by Type, and by Application for each country/region.(2019-2030)

Chapter 7: Provides profiles of key players, introducing the basic situation of the main companies in the market in detail, including product sales, revenue, price, gross margin, product introduction, recent development, etc. (2019-2024)

Chapter 8: Analysis of industrial chain, including the upstream and downstream of the industry.

Chapter 9: Conclusion.



Benefits of purchasing QYResearch report:

Competitive Analysis: QYResearch provides in-depth NDIR CO2 Sensor competitive analysis, including information on key company profiles, new entrants, acquisitions, mergers, large market shear, opportunities, and challenges. These analyses provide clients with a comprehensive understanding of market conditions and competitive dynamics, enabling them to develop effective market strategies and maintain their competitive edge.

Industry Analysis: QYResearch provides NDIR CO2 Sensor comprehensive industry data and trend analysis, including raw material analysis, market application analysis, product type analysis, market demand analysis, market supply analysis, downstream market analysis, and supply chain analysis.

and trend analysis. These analyses help clients understand the direction of industry development and make informed business decisions.

Market Size: QYResearch provides NDIR CO2 Sensor market size analysis, including capacity, production, sales, production value, price, cost, and profit analysis. This data helps clients understand market size and development potential, and is an important reference for business development.



Other relevant reports of QYResearch:

Global and China NDIR CO2 Sensor Market Report & Forecast 2024-2030
Global NDIR CO2 Sensor Market Insights, Forecast to 2030
Global NDIR CO2 Sensor Market Research Report 2024
NDIR CO2 Sensor - Global Market Share and Ranking, Overall Sales and Demand Forecast 2024-2030
Global NDIR CO2 Sensor Module Market Insights, Forecast to 2030
Global NDIR CO2 Sensor Module Market Research Report 2024
NDIR CO2 Sensor Module - Global Market Share and Ranking, Overall Sales and Demand Forecast 2024-2030
Global and China Non-dispersive Infrared (NDIR) CO2 Sensors Market Report & Forecast 2024-2030
Non-dispersive Infrared (NDIR) CO2 Sensors- Global Market Share and Ranking, Overall Sales and Demand Forecast 2024-2030
Global Non-dispersive Infrared (NDIR) CO2 Sensors Market Insights, Forecast to 2030
Global Non-dispersive Infrared (NDIR) CO2 Sensors Market Research Report 2024
NDIR CO2 Sensor - Global Market Insights and Sales Trends 2024
Global NDIR CO2 Sensor Market Report, History and Forecast 2018-2029, Breakdown Data by Manufacturers, Key Regions, Types and Application
Global NDIR CO2 Sensor Market Insights, Forecast to 2029
Global NDIR CO2 Sensor Market Research Report 2023
Global NDIR CO2 Sensor Industry Research Report, Growth Trends and Competitive Analysis 2023-2029
NDIR CO2 Sensor Module - Global Market Insights and Sales Trends 2024
Global NDIR CO2 Sensor Module Market Insights, Forecast to 2029
Global NDIR CO2 Sensor Module Market Research Report 2023
Global NDIR CO2 Sensor Module Market Report, History and Forecast 2018-2029, Breakdown Data by Manufacturers, Key Regions, Types and Application

About Us：

QYResearch founded in California, USA in 2007, which is a leading global market research and consulting company. Our primary business include market research reports, custom reports, commissioned research, IPO consultancy, business plans, etc. With over 17 years of experience and a dedicated research team, we are well placed to provide useful information and data for your business, and we have established offices in 7 countries (include United States, Germany, Switzerland, Japan, Korea, China and India) and business partners in over 30 countries. We have provided industrial information services to more than 60,000 companies in over the world.

Contact Us:
If you have any queries regarding this report or if you would like further information, please contact us:
QY Research Inc.
Add: 17890 Castleton Street Suite 369 City of Industry CA 91748 United States
EN: https://www.qyresearch.com
Email: global@qyresearch.com
Tel: 001-626-842-1666(US)  
JP: https://www.qyresearch.co.jp

This release was published on openPR.