Desiccant Rotors Research:CAGR of 5.1% during the forecast period

QY Research Inc. (Global Market Report Research Publisher) announces the release of 2024 latest report "Desiccant Rotors- Global Market Share and Ranking, Overall Sales and Demand Forecast 2024-2030". Based on current situation and impact historical analysis (2019-2023) and forecast calculations (2024-2030), this report provides a comprehensive analysis of the global Wire Drawing Dies market, including market size, share, demand, industry development status, and forecasts for the next few years.



A desiccant rotor (desiccant wheel) is very similar to a thermal wheel, but with a coating applied for the sole purpose of dehumidifying, or "drying", the air stream. The desiccant is normally silica gel. As the wheel turns, the desiccant passes alternately through the incoming air, where the moisture is adsorbed, and through a "regenerating" zone, where the desiccant is dried and the moisture expelled. The wheel continues to rotate, and the adsorbent process is repeated. Regeneration is normally carried out by the use of a heating coil, such as a water or steam coil, or a direct-fired gas burner.



【Get a free sample PDF of this report (Including Full TOC, List of Tables & Figures, Chart)】

https://www.qyresearch.com/reports/2328183/desiccant-rotors





Desiccant Rotors Market Summary



According to the new market research report "Global Desiccant Rotors Market Report 2023-2029", published by QYResearch, the global Desiccant Rotors market size is projected to reach USD 0.24 billion by 2029, at a CAGR of 5.1% during the forecast period.

Global Desiccant Rotors MarketSize(US$ Million), 2018-2029
240815-155829.webp (14 KB)

Above data is based on report from QYResearch: Global Desiccant Rotors Market Report 2023-2029 (published in 2023). If you need the latest data, plaese contact QYResearch.

A desiccant rotor (desiccant wheel) is very similar to a thermal wheel, but with a coating applied for the sole purpose of dehumidifying, or "drying", the air stream. The desiccant is normally silica gel. As the wheel turns, the desiccant passes alternately through the incoming air, where the moisture is adsorbed, and through a "regenerating" zone, where the desiccant is dried and the moisture expelled. The wheel continues to rotate, and the adsorbent process is repeated. Regeneration is normally carried out by the use of a heating coil, such as a water or steam coil, or a direct-fired gas burner.



Global Desiccant Rotors Top9Players Ranking and Market Share (Ranking is based on the revenue of 2022, continually updated)
240815-155850.webp (17 KB)

Above data is based on report from QYResearch: Global Desiccant Rotors Market Report 2023-2029 (published in 2023). If you need the latest data, plaese contact QYResearch.

The global key manufacturers of Desiccant Rotors include Seibu Giken, DRI, etc. In 2022, the global top three players had a share approximately 56.0% in terms of revenue.



Desiccant Rotors,Global Market Size, Split by Product Segment
240815-155921.webp (26 KB)



Based on or includes research from QYResearch: Global Desiccant Rotors Market Report 2023-2029.



In terms of product type, Silica Gel is the largest segment, hold a share of 70.9%.





Market Drivers:

Energy Efficiency and Sustainability: Desiccant rotor systems are known for their energy-efficient moisture control capabilities. As businesses and industries increasingly focus on energy efficiency and sustainability, desiccant rotors offer an environmentally friendly alternative for humidity control in HVAC systems.

Applications in Diverse Industries: Desiccant rotor systems find applications in various industries, including pharmaceuticals, food processing, data centers, and manufacturing. The versatility of these systems and their ability to provide precise humidity control make them attractive across different sectors, driving market demand.



Restraint:

High Initial Costs: Desiccant rotor systems can have higher upfront costs compared to traditional HVAC systems. The initial investment required for the purchase and installation of desiccant rotor-based equipment may act as a barrier to adoption for some businesses.

Limited Awareness: There was, at times, limited awareness and understanding of desiccant rotor technology among potential users. This lack of awareness can hinder market growth as potential customers may not fully grasp the benefits and efficiency gains offered by these systems.



Opportunity:

Growing Industrialization: The expansion of industrial sectors, particularly in emerging economies, leads to increased demand for effective humidity control solutions. Desiccant rotor systems find applications in various industries such as manufacturing, food processing, and pharmaceuticals, providing an opportunity for market growth.

Remote Monitoring and Control: Offering advanced features such as remote monitoring and control through IoT (Internet of Things) technologies can enhance the attractiveness of desiccant rotor systems, especially for industries where real-time data and control are crucial.







The report provides a detailed analysis of the market size, growth potential, and key trends for each segment. Through detailed analysis, industry players can identify profit opportunities, develop strategies for specific customer segments, and allocate resources effectively.



The Desiccant Rotors market is segmented as below:

By Company

Seibu Giken
DRI
Proflute
Rotor Source
Puressci
Trane
NICHIAS Corporation
Ecotech
NovelAire



Segment by Type

Silica Gel
Molecular Sieve



Segment by Application

Pharmaceutical
Food Industry
Chemical Industry
Electronics
Others



Each chapter of the report provides detailed information for readers to further understand the Desiccant Rotors market:

Chapter 1: Introduces the report scope of the Desiccant Rotors report, global total market size (valve, volume and price). This chapter also provides the market dynamics, latest developments of the market, the driving factors and restrictive factors of the market, the challenges and risks faced by manufacturers in the industry, and the analysis of relevant policies in the industry. (2019-2030)

Chapter 2: Detailed analysis of Desiccant Rotors manufacturers competitive landscape, price, sales and revenue market share, latest development plan, merger, and acquisition information, etc. (2019-2024)

Chapter 3: Provides the analysis of various Desiccant Rotors market segments by Type, covering the market size and development potential of each market segment, to help readers find the blue ocean market in different market segments. (2019-2030)

Chapter 4: Provides the analysis of various market segments by Application, covering the market size and development potential of each market segment, to help readers find the blue ocean market in different downstream markets.(2019-2030)

Chapter 5: Sales, revenue of Desiccant Rotors in regional level. It provides a quantitative analysis of the market size and development potential of each region and introduces the market development, future development prospects, market space, and market size of each country in the world..(2019-2030)

Chapter 6: Sales, revenue of Desiccant Rotors in country level. It provides sigmate data by Type, and by Application for each country/region.(2019-2030)

Chapter 7: Provides profiles of key players, introducing the basic situation of the main companies in the market in detail, including product sales, revenue, price, gross margin, product introduction, recent development, etc. (2019-2024)

Chapter 8: Analysis of industrial chain, including the upstream and downstream of the industry.

Chapter 9: Conclusion.



Benefits of purchasing QYResearch report:

Competitive Analysis: QYResearch provides in-depth Desiccant Rotors competitive analysis, including information on key company profiles, new entrants, acquisitions, mergers, large market shear, opportunities, and challenges. These analyses provide clients with a comprehensive understanding of market conditions and competitive dynamics, enabling them to develop effective market strategies and maintain their competitive edge.

Industry Analysis: QYResearch provides Desiccant Rotors comprehensive industry data and trend analysis, including raw material analysis, market application analysis, product type analysis, market demand analysis, market supply analysis, downstream market analysis, and supply chain analysis.

and trend analysis. These analyses help clients understand the direction of industry development and make informed business decisions.

Market Size: QYResearch provides Desiccant Rotors market size analysis, including capacity, production, sales, production value, price, cost, and profit analysis. This data helps clients understand market size and development potential, and is an important reference for business development.



Other relevant reports of QYResearch:

Global Desiccant Rotors Industry Research Report, Growth Trends and Competitive Analysis 2024-2030
Global Desiccant Rotors Market Size, Manufacturers, Supply Chain, Sales Channel and Clients, 2024-2030
Global Desiccant Rotors Market Insights, Forecast to 2030
Global Desiccant Rotors Market Research Report 2024
Global Silica Gel Desiccant Rotors Market Insights, Forecast to 2030
Silica Gel Desiccant Rotors - Global Market Share and Ranking, Overall Sales and Demand Forecast 2024-2030
Global Silica Gel Desiccant Rotors Market Research Report 2024
Global Solid Desiccant Rotor Dehumidifiers Market Insights, Forecast to 2030
Global Solid Desiccant Rotor Dehumidifiers Market Research Report 2024
Solid Desiccant Rotor Dehumidifiers - Global Market Share and Ranking, Overall Sales and Demand Forecast 2024-2030
Global Desiccant Rotor Dehumidification Systems Market Insights, Forecast to 2030
Global Desiccant Rotor Dehumidification Systems Market Research Report 2024
Desiccant Rotor Dehumidification Systems - Global Market Share and Ranking, Overall Sales and Demand Forecast 2024-2030
Global and India Desiccant Rotors Market Report & Forecast 2023-2029
Global Desiccant Rotors Market Research Report 2023
Desiccant Rotors - Global Market Insights and Sales Trends 2024
Global Desiccant Rotors Market Insights, Forecast to 2029
Global Desiccant Rotors Industry Research Report, Growth Trends and Competitive Analysis 2023-2029
Global Desiccant Rotors Market Report, History and Forecast 2018-2029, Breakdown Data by Manufacturers, Key Regions, Types and Application
Silica Gel Desiccant Rotors - Global Market Insights and Sales Trends 2024

About Us：
QYResearch founded in California, USA in 2007, which is a leading global market research and consulting company. Our primary business include market research reports, custom reports, commissioned research, IPO consultancy, business plans, etc. With over 17 years of experience and a dedicated research team, we are well placed to provide useful information and data for your business, and we have established offices in 7 countries (include United States, Germany, Switzerland, Japan, Korea, China and India) and business partners in over 30 countries. We have provided industrial information services to more than 60,000 companies in over the world.

Contact Us:
If you have any queries regarding this report or if you would like further information, please contact us:
QY Research Inc.
Add: 17890 Castleton Street Suite 369 City of Industry CA 91748 United States
EN: https://www.qyresearch.com
Email: global@qyresearch.com
Tel: 001-626-842-1666(US)  
JP: https://www.qyresearch.co.jp

This release was published on openPR.