openPR Logo
Press release

Successful first IEC classification test for SoDAR AQ510 Wind Finder

01-28-2016 09:07 AM CET | Energy & Environment

Press release from: Ammonit Measurement GmbH

SoDAR AQ510 Wind Finder / AQ System

SoDAR AQ510 Wind Finder / AQ System

SoDAR AQ510 Wind Finder achieved a major milestone towards full IEC compliance by performing the first IEC classification. AQ510 Wind Finder is the only SoDAR on the market with a first well-done sensitivity analysis. The classification results are very promising.

AQ System Stockholm AB, cooperation partner of Ammonit Measurement GmbH in the field of remote sensing, successfully performed a first sensitivity analysis for IEC compliance (CD IEC 61400-12-1, Ed. 2, Annex L). DNV GL performed the complex sensitivity analysis against a 103m IEC-compliant met mast. AQ510 Wind Finder achieved the final IEC accuracy class 2-4 at 80 and 100m height. According to DNV GL the classification results are reasonable and broadly within the range of other classification tested remote sensing devices, e.g., LiDAR. So far AQ510 Wind Finder has been the only SoDAR device with a first IEC-compliant classification.

Vincent Camier, Managing Director of Ammonit Measurement GmbH, is very satisfied with the achieved classification: “Ammonit has been focussing on accurate measurement instruments ever since. The measurement accuracy of the AQ510 wind finder has been promising, when we added the SoDAR to our portfolio last year. The IEC classification and a number of verifications confirm our positive decision for the AQ510. However, the SoDAR complements our product portfolio and also the market for wind measurement systems. With the AQ510 we can offer a cost-efficient and reliable option for remote sensing devices.”

The IEC 61400-12-1 is currently under revision with the aim to include guidance for using remote sensing devices in power performance assessments. Annex L of the CD IEC 61400-12-1 (2nd Ed.) describes in detail that an IEC classification has to be performed before remote sensing devices can be used in wind site assessments. The classification includes testing of the sensitivity of the accuracy of the device to variations in environmental variables. Additionally, AQ System verifies each AQ510 Wind Finder against its 103m IEC-compliant met mast in Fimmerstad, Sweden. The verification tests indicate also the low production tolerance guaranteeing great unit-to-unit conformity.

Prior to the IEC classification, leading wind consultants including BBB Umwelttechnik, DNV GL and Ecofys performed a number of validation tests of the AQ 510 Wind Finder. The results of all validation tests have been excellent and confirmed the measurement accuracy of the SoDAR.

Ammonit offers high quality measurement equipment for the wind and solar industry. As a wind energy pioneer, Ammonit has been playing a leading role in the global wind measurement sector since 1989. Ammonit measurement systems are designed for wind and solar resource assessment, wind farm and solar power plant monitoring, as well as power curve measurement and climate research. The product portfolio includes data loggers, meteorological sensors, SoDAR and LiDAR devices, as well as communication and power supply systems. Additionally, Ammonit developed AmmonitOR, a web platform to monitor measurement campaigns in accordance with the MEASNET guideline. Ammonit cooperates with partners in most countries of the world to provide full service packages for successful measurement campaigns.
For further details see also www.ammonit.com

Daniela Treptow
Ammonit Measurement GmbH
Wrangelstrasse 100, 10997 Berlin, Germany
T. +49 30 6003188-21
E. dt@ammonit.com
www.ammonit.com

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Successful first IEC classification test for SoDAR AQ510 Wind Finder here

News-ID: 316263 • Views: 1508

More Releases from Ammonit Measurement GmbH

Ammonit partners with ZephIR Lidar as a ‘Trusted Service Provider’
Ammonit Measurement GmbH (Ammonit), leading supplier of high quality measurement equipment for wind and solar resource assessment and monitoring, complements its remote sensing portfolio with the wind lidar technology ZephIR. As ‘Trusted Service Provider’, Ammonit supplies ZephIR Lidar via its global market channels. By implementing ZephIR technology, Ammonit’s customers benefit from accurate affordable wind data across all stages of wind farm project development. With ZephIR 300 for ground based installations and
Ammonit signs partnership with leading SODAR manufacturer AQSystem
Presentation of new SODAR system AQ510 windfinder at the EWEA in Barcelona Berlin, 6 March 2014. Ammonit Measurement GmbH, leading supplier of top level measurement equipment for the wind and solar industry, enters global sales partnership with AQSystem, manufacturer of the best SODAR systems on the market. At the EWEA (10 – 13 March 2014) in Barcelona, Ammonit will introduce the latest in SODAR development, the AQ510 windfinder. “We are very
Ammonit supplies 100 Data Loggers and Measurement Equipment to C-WET in India
Berlin, December 13, 2012. Ammonit has won the international tender for a nationwide wind measurement campaign organised by C-WET in India. C-WET (Centre for Wind Energy Technology) is an autonomous agency under the Ministry of New and Renewable Energy, and is the leading institution for science and technology in India for research into wind and solar energy. The purpose of the campaign is to obtain precise wind measurements, according to
Ammonit implements NetworkManager tools improved by Lanedo to ensure stable comm …
Berlin, 11 October 2011. In order to ensure reliable communication with its data loggers the leading wind measurement expert Ammonit has implemented Net-work Manager tools developed by Lanedo. As data loggers are mainly operated in remote areas around the globe and store valuable measurement data, stable communication via modem is essential. After unsatisfactory results with off-the-shelf hardware, Ammonit has been collaborating with Lanedo, a company that is specialized in developing software

All 5 Releases


More Releases for IEC

ATEQ adds Ninth ISO/IEC 17025 Certified Lab
ATEQ announces the ISO 17025 accreditation of the testing/calibration lab in their Spain office. The accreditation of this office gives ATEQ a total of nine global offices that have an ISO/IEC 17025 certified lab; USA, France, Canada, China, Korea, India, Japan and Italy also have accredited labs. ISO 17025 specifies quality management requirements for the competence and consistent operation of laboratories to produce precise and accurate test and calibration data. The
Etech Receives ISO/IEC 27001:2013 Certification
Nacogdoches, TX – June 09, 2017 –Etech Global Services is very proud to announce that it has recently received the ISO/IEC 27001:2013 certification from the International Organization for Standardization (ISO), an international standard-setting body composed of representatives from various national standards organizations. ISO 27001 is a framework of policies and procedures that includes all legal, physical and technical controls involved in information risk management processes. ISO certification requires companies to:
Global Fan Coils Market 2017 - Daikin, Trane, IEC, Williams, Zehnder
Global Fan Coils market 2017 Research Report offers a complete and in-depth analysis of the growth rate of the Fan Coils industry. In the first section, Fan Coils Market report presents the overview of Fan Coils industry which includes definitions, classifications, applications and Fan Coils industry chain structure. Global Fan Coils Market further includes Fan Coils development history, competitive analysis of Fan Coils industry. Top leading Manufacturers Analysis of Fan Coils:- 1 Carrier 2
Intelligent Electronic Devices Market - Complying Systems With International Ele …
Intelligent Electronic Devices Market: Overview Most of the nations worldwide are trying to raise their electricity production in order to complement the increasing industrialization and urbanization. This factor has significantly contributed to the rise of substation installation in order to deliver electricity to various remote parts of a nation. A substation is used to step up current and voltage or vice versa for transmitting electricity to long distances. Thus, a substation typically
eRevMax Recertified for ISO/IEC 27001:2005
Hospitality Software Vendor maintains strict compliance to international security best practices Kolkata, 1 September 2010: eRevMax Technologies, pioneer in hotel online distribution, channel and revenue management tools, has been recertified for its information security management standards. Following a stringent audit overseen by DNV, an internationally accredited certification organisation, eRevMax received ISO/IEC 27001:2005 for the next three years. The initial certification was achieved in 2007. The ISO 27001:2005 is awarded to companies that
EKU Elektronik presents MTP6000 (IEC tester with high voltage test)
At this year's MEDICA EKU Elektronik will present the MTP6000, a measuring and checking device for testing the electric safety of medical technical equipment and other electrical devices. After a successful market launch in cooperation with a well-known manufacturer of defibrillators in Germany, next week this innovative IEC tester with high voltage test is introduced to an international professional audience. Information about the special safety features of the MTP6000 will