openPR Logo
Press release

Seamless Healing: Revolutionizing Surgical Procedures with Automated Suturing Devices Market for Enhanced Precision and Patient Outcomes

Automated Suturing Devices Market

Automated Suturing Devices Market

The Automated Suturing Devices Market revenues were estimated at US$ 3 Bn in 2021 and is anticipated to grow at a CAGR of 8.7% from 2022-2032, according to a recently published Persistence Market Research report. By the end of 2032, the market is expected to reach a valuation of US$ 7.5 Bn.

The key markets for automated suturing device include cardiac surgeries where the demand growth of automated suturing device was recorded at 9.1% by the end of year 2021.

The key factor which is propelling the automated suturing devices is the rising numbers of the geriatric population which eventually increases the chronic disease number, according to 2016 WHO report, the average global surgery rate was 4,469 procedures per 100,000 persons per year.

The average doctor-to-patient ratio worldwide is less than 80:1000, with Qatar having the highest ratio at 77.4:1000 and Guinea having the lowest at 0.1:1000. There has also been a significant increase in the number of cases of accidents and trauma, with India ranking third globally with the highest number of accidents in 199 countries, followed by China and the United States.

Request for sample copy of report: https://www.persistencemarketresearch.com/samples/33196

Key Takeaways from Market Study

The United States is expected to account for the highest market of US$ 3 Bn by the end of 2032. It is expected to be projected to have an Absolute Dollar Growth of US$ 1758.9 Mn.
Automated suturing devices market in the UK is projected to reach a valuation of US$ 267 Mn by 2032.
The use of a disposable automated suturing device is carried-out due to its effective cost than reusable devices and taking into account of patient safety, fiscal responsibility and environmental protection.

The rising number of heart surgeries is fuelling the market of automated suturing devices. This open market segment for automated suturing equipment is projected to grow at a rate of 6.1% by 2027. As the number of older people increases, the incidence of heart disease increases, and the number of open surgery increases. According to the American Heart Association, about 500,000 open heart surgeries are performed each year in the United States.

The automatic suture device works with minimal incisions, low blood loss, reduced needle trauma, and infection-free suturing that plays an important role in the outcome of surgical procedures. It reduces sewing time by 25%, resulting in hospital efficiency and cost savings. The automated suturing devices can articulate and rotate the entire arm from 180° to 360° which causes ease of use to the doctors.

Know the methodology of report: https://www.persistencemarketresearch.com/methodology/33196

Competitive Landscape

Key players operating in the Automated Suturing Devices market include

Medtronic Plc,
Boston Scientific
Becton Dickinson
EndoEvolution
LSI Solutions, Inc.
Smith & Nephew, Inc.
Braun Melsungen AG
Ethicon, Inc.
Teleflex Incorporated
DemeTech Corporation

Some of the recent developments of key Neural Implants providers are as follows:

In June 2021, Anchora Medical, a subsidiary of Alon Medtech Venture, has announced the closure of a US$ 4.5 million financial grant led by HOYA Corporation and Tal Capital. The money will be used for completing singing use laparoscopic sewing machine by Anchora.
In November 2020, Healthium Medtech, one of India's largest medical device companies launched Trubarb. This innovation is a knotless fabric closure that changes the feel of sewing.
In March 2020, Origami Surgical introduced StitchKit, a patented suture application and acquisition system. The U.S. Food and Drug Administration (FDA) has approved 510k approval for three types of novels for the StitchKit platform for robotic robots.

Get full access of report: https://www.persistencemarketresearch.com/checkout/33196

Want to Know More?

Persistence Market Research, a research and consulting firm, has published a revised market research report on the electric cargo bike market that contains a global industry analysis of 2017-2021 and an opportunity assessment for 2022-2032. The report provides in-depth analysis of the market through different segments, namely, product type, battery type, end use, and region.

Persistence market research
Address - 305 Broadway, 7th Floor, New York City, NY 10007 United States
U.S. Ph. - +1-646-568-7751
USA-Canada Toll-free - +1 800-961-0353
Sales - sales@persistencemarketresearch.com

About us: -

Persistence Market Research is a U.S.-based full-service market intelligence firm specializing in syndicated research, custom research, and consulting services. Persistence Market Research boasts market research expertise across the Healthcare, Chemicals and Materials, Technology and Media, Energy and Mining, Food and Beverages, Semiconductors and Electronics, Consumer Goods, and Shipping and Transportation industries. The company draws from its multi-disciplinary capabilities and high-pedigree team of analysts to share data that precisely corresponds to clients' business needs.

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Seamless Healing: Revolutionizing Surgical Procedures with Automated Suturing Devices Market for Enhanced Precision and Patient Outcomes here

News-ID: 3061497 • Views:

More Releases from Persistence Market Research

Aseptic Packaging Market Set to Grow to US$136.5 Bn by 2033 Driven by Rising Food & Pharma Demand
Aseptic Packaging Market Set to Grow to US$136.5 Bn by 2033 Driven by Rising Foo …
Introduction: Aseptic Packaging Market Overview and Industry Evolution The aseptic packaging market has emerged as a cornerstone of modern food, beverage, and pharmaceutical preservation systems. As global consumers increasingly seek safe, long-lasting, and convenient packaged products, aseptic packaging solutions have gained substantial importance. This technology allows products to be sterilized separately from packaging materials and filled in a sterile environment, ensuring extended shelf life without refrigeration or preservatives. The rising demand
Gas-Insulated Transmission Line (GIL) Market Expected to See Growth to US$836.9 Mn by 2032, Driven by Grid Modernization
Gas-Insulated Transmission Line (GIL) Market Expected to See Growth to US$836.9 …
Introduction: Rising Demand for Advanced Power Transmission Solutions The global energy landscape is undergoing a major transformation as nations accelerate investments in renewable energy, grid expansion, and reliable electricity distribution networks. With rapid urbanization, industrialization, and digital infrastructure growth, the demand for uninterrupted and efficient power transmission has never been higher. Traditional overhead transmission systems, while widely used, face challenges related to land constraints, environmental exposure, and transmission losses. This has
Dimethyl Sulfide (DMS) Market Anticipated to Reach US$ 251.2 Mn by 2033, Driven by Food & Chemical Demand
Dimethyl Sulfide (DMS) Market Anticipated to Reach US$ 251.2 Mn by 2033, Driven …
Market Overview: Expanding Demand for Dimethyl Sulfide Across Industries The Dimethyl Sulfide (DMS) market is witnessing consistent growth due to its widespread applications across food processing, pharmaceuticals, agriculture, and chemical manufacturing. Dimethyl sulfide is an organosulfur compound known for its distinctive odor and reactive properties, making it a crucial intermediate in multiple industrial processes. In food and beverage applications, it is valued for flavor enhancement, while in chemical manufacturing, it serves
Onyx Stone Market to Surge to Reach US$ 1.8 Bn by 2033 Driven by Construction & Interior Decoration Demand
Onyx Stone Market to Surge to Reach US$ 1.8 Bn by 2033 Driven by Construction & …
Market Overview: Rising Demand for Premium Natural Stones The onyx stone market has gained remarkable prominence in recent years, driven by increasing demand for luxury natural stones in architecture, interior décor, and artistic applications. Onyx, known for its translucent appearance and unique veining patterns, has become a preferred choice for premium residential and commercial projects. The material's ability to elevate aesthetic appeal while maintaining durability has attracted designers, architects, and homeowners

All 5 Releases


More Releases for Automated

Automated Fiber Placements And Automated Tape Laying (AFP- ATL) Machines Market …
According to Market Research Intellect, the global Automated Fiber Placements And Automated Tape Laying (AFP- ATL) Machines market under the Internet, Communication and Technology category is expected to register notable growth from 2025 to 2032. Key drivers such as advancing technologies, changing consumer behavior, and evolving market dynamics are poised to shape the trajectory of this market throughout the forecast period. The market for automated tape laying (ATL) and automated fiber
Ace Automated Gates | Austin Enhances Security with Premium Automated Gate Solut …
Ace Automated Gates | Austin enhances property security with premium automated gate solutions. Specializing in gate installation, repair, and advanced access control systems, they provide high-quality electric and motorized gates for residential and commercial properties. Offering expert craftsmanship and durable materials, they ensure long-lasting security and convenience. Austin, TX - Home and business owners seeking enhanced security, convenience, and style can now rely on Ace Automated Gates | Austin [https://aceautomatedgatesaustin.com/] for
Automated Autoinjectors Market
The "Automated Autoinjectors Market" is expected to reach USD xx.x billion by 2031, indicating a compound annual growth rate (CAGR) of xx.x percent from 2024 to 2031.  The market was valued at USD xx.x billion In 2023. Growing Demand and Growth Potential in the Global Automated Autoinjectors Market, 2024-2031 Verified Market Research's most recent report, "Automated Autoinjectors Market: Global Industry Trends, Share, Size, Growth, Opportunity and Forecast 2023-2030," provides an in-depth examination
Automated Journalism Market All Sets for Continued Outperformance: Automated Ins …
HTF MI introduces new research on Automated Journalism covering the micro level of analysis by competitors and key business segments (2024-2030). The Automated Journalism explores a comprehensive study of various segments like opportunities, size, development, innovation, sales, and overall growth of major players. The research is carried out on primary and secondary statistics sources and it consists of both qualitative and quantitative detailing. Some of the major key players profiled
Automated Fiber Placements and Automated Tape Laying (AFP- ATL) Machines Market …
Automated fiber placement and automated tape laying machines are used for the fabrication of composites parts used in aerospace and defense industries. These machines help in precisely placing fiber tapes, tows and sheets on molds or cores to manufacture composite parts with high strength and lightweight properties. Market Dynamics: Increasing demand from aerospace and defense industry is one of the major factors estimated to boost the growth of the AFP- ATL machines
Automated Microbiology Market - Efficiency Meets Accuracy: Redefining Microbiolo …
Newark, New Castle, USA: The "Automated Microbiology Market" provides a value chain analysis of revenue for the anticipated period from 2022 to 2030. The report will include a full and comprehensive analysis of the business operations of all market leaders in this industry, as well as their in-depth market research, historical market development, and information about their market competitors Automated Microbiology Market: https://www.growthplusreports.com/report/automated-microbiology-market/7801 This latest report researches the industry structure, sales, revenue,