Nuclear Power Plant and Equipment Market to Rear Excessive Growth during 2030

Nuclear power plants are differed from fossil power plants mainly in the source of heat for converting water into steam, which is subsequently used to run the turbine and produce electricity. In addition, the source of heat is nuclear fission (or fusion, in future fusion reactors), while in the latter, it is the combustion of the fossil fuels such as coal, oil, or gas. Therefore, the structural materials chosen for nuclear reactors should also meet the requirements of fossil power plants in terms of good creep resistance, oxidation resistance, low-cycle fatigue strength, and thermal conductivity. Moreover, the elements present in the structural materials should also have a low neutron absorption cross-section, that is the probability of neutrons produced in the reactor being absorbed by these elements should be low. Furthermore, the properties of these materials should not degrade under the high levels of radiation that exist in nuclear reactors. Such degradation is generally referred to as radiation damage and includes irradiation embrittlement, irradiation creep, and swelling, helium embrittlement. In addition, nuclear power provides almost 15 %of the world's electricity and according to the U.S. energy information and administration, as of December 31, 2020, 94 nuclear reactors were operating at 56 nuclear power plants in 28 states. 32 of the plants have 2 reactors, and 3 plants have three reactors. Nuclear power plants have supplied about 20% of total annual U.S. electricity since 1990.

Access the Full Report @ https://www.alliedmarketresearch.com/nuclear-power-plant-and-equipment-market

The growth in demand for low-carbon-emission energy and long-life power plants led to an increase in demand for nuclear power plants, and the fast expansion of nuclear power plants created a number of opportunities for nuclear power plant equipment. .

The nuclear power plant and equipment market is segmented on the basis of reactor type, equipment type, and region. On the basis of reactor type, the market is categorized into pressurized water reactor (PWR), pressurized heavy water reactor (PHWR), boiling water reactor (BWR), light water graphite reactor (LWGR), gas cooled reactor (GCR), and others. On the basis of equipment type, it is segmented into island equipment and auxiliary equipment. On the basis of region, it is analyzed across North America, Europe, Asia-Pacific, and LAMEA.

The global nuclear power plant and equipment market analysis covers in-depth information about the major industry participants. The key players operating and profiled in the report include BWX Technologies, INC, Dongfang Electric Co., Ltd., Doosan Corporation, General Electric, Korea Electric Power Corporation, Larsen & Toubro Limited, Mitsubishi Heavy Industries, LTD., Shanghai ALSTOM SA, The State Atomic Energy Corporation (ROSATOM), Toshiba International Corporation.

The global nuclear power plant and equipment market is analyzed and estimated in accordance with the impacts of the drivers, restraints, and opportunities. The period studied in this report is 2021-2030. The report includes the study of the market with respect to the growth prospects and restraints based on the regional analysis. The study includes Porter's Five Forces analysis of the industry to determine the impact of suppliers, competitors, new entrants, substitutes, and buyers on the market growth.

Get a PDF brochure for Industrial Insights and Business Intelligence @ https://www.alliedmarketresearch.com/request-sample/970

Impact Of Covid-19 On The Global Nuclear Power Plant And Equipment Market

• COVID-19 has impacted various industries due to shut down of different industrial operations and disrupted supply chain. Maximum companies halted their operation due to less workforce. However, there is a gradual decline in the equipment segment of the nuclear power plant and equipment market due to the impact of COVID-19.
• The electric industry accounted for significant share in terms of consumption during global lockdown. Electricity consumption has grown due to large decreases in services and industry, which have only been partially compensated by rise in household use, which has raised demand for nuclear power plants and equipment..
• The COVID-19 pandemic has impacted nuclear power and the nuclear fuel industry on both the supply and demand side. In the short term, the impact is greatest on the supply side for uranium, as various mines and nuclear fuel cycle facilities are suspending operations due to health concerns. As a result, the uranium price increased 33% from its lowest point registered in mid-March this 2020.
• Demand for nuclear power is directly proportional to the demand for nuclear fuel which was highly impacted due to COVID-19, but not nearly to the same extent as oil due to the nature of underlying demand for electricity versus oil. The Energy Information Administration estimates that the demand for electricity in the U.S. was declined by 3% in 2020. In France, where nearly 75% of electrical generation comes from nuclear energy, electricity demand is projected to decline by 15-20% in 2020. As a result, France's EDF has already downgraded its nuclear power generation outlook for both 2020 and 2021 by 8-12% less than its pre-pandemic forecasts.
• Reactor construction schedules have also been impacted due to COVID-19 issues. China, which accounts for much of the world's new reactor build, some new reactor projects have been halted temporarily. Reactor construction in the U.S., France, the United Arab Emirates, Bangladesh, and the UK have also been negatively impacted. These delays are a function of the reduction of staff at the construction sites and disruptions in the supply chain.
• The delay in reactor construction along with the drop in electricity demand negatively affected the nuclear power output in the 2021, but the extent of the impact is uncertain. In China, which has the largest new reactor construction program, economic growth has suffered as a result of the COVID-19 pandemic (due to developments on both of the sides of China) and thus the need for new electricity generation has slowed.
• The nuclear industry has been taking special measures to cope with the global pandemic, and no country has reported the enforced shutdown of a nuclear power reactor due to the effects of COVID-19 on the workforce or supply chains. This is according to reports from operators and regulators received through the IAEA's COVID-19 Operational Experience Network (OPEX) and International Reporting System for Operating Experience (IRS). However, the abovementioned point shows that there is a sluggish decline in the nuclear power plant and equipment market.

Enquiry Before Buying: https://www.alliedmarketresearch.com/purchase-enquiry/970

Key findings of the study

• On the basis of reactor type, the pressurized water reactor (PWR) segment emerged as the global leader in 2020 and is anticipated to be the largest markets during the forecast period.
• On the basis of equipment type, the auxiliary equipment segment emerged as the global leader in 2020 and is anticipated to be the largest markets during the forecast period.
• On the basis of region, the Asia-Pacific registered the highest market share and is projected to maintain the same during the forecast period

About Us

Allied Market Research (AMR) is a full-service market research and business-consulting wing of Allied Analytics LLP based in Portland, Oregon. Allied Market Research provides global enterprises as well as medium and small businesses with unmatched quality "Market Research Reports" and "Business Intelligence Solutions." AMR has a targeted view to provide business insights and consulting to assist its clients to make strategic business decisions and achieve sustainable growth in their respective market domains.

Pawan Kumar, the CEO of Allied Market Research, is leading the organization toward providing high-quality data and insights. We are in professional corporate relations with various companies and this helps us in digging out market data that helps us generate accurate research data tables and confirms the utmost accuracy in our market forecasting. Each and every data presented in the reports published by us is extracted through primary interviews with top officials from leading companies of the domain concerned. Our secondary data procurement methodology includes deep online and offline research and discussion with knowledgeable professionals and analysts in the industry.

Contact:

David Correa
5933 NE Win Sivers Drive
#205, Portland, OR 97220
United States
USA/Canada (Toll-Free):
+1-800-792-5285, +1-503-894-6022
UK: +44-845-528-1300
Hong Kong: +852-301-84916
India (Pune): +91-20-66346060
Fax: +1(855)550-5975
help@alliedmarketresearch.com
Web: www.alliedmarketresearch.com
Allied Market Research Blog: https://blog.alliedmarketresearch.com

This release was published on openPR.