openPR Logo
Press release

SENSOR+TEST and Lightfair: New JENCOLOR® solutions to control and manage LEDs in "lighting/back-light" applications

05-06-2014 05:05 PM CET | Industry, Real Estate & Construction

Press release from: MAZeT GmbH

/ PR Agency: alvacon pr
Development Kit DK MTCS-INT-AB4

Development Kit DK MTCS-INT-AB4

MAZeT GmbH shows their latest products and innovative sensor solutions for the applications of LED light control and management both at this year's international trade fair SENSOR + TEST in Nuremberg from June 3rd to 5th 2014 in hall 12, booth 131 as well as at the Light Fair International 2014, this year in Las Vegas from 1st to 5th at the Avnet Electronics Marketing booth.

MAZeT - development and manufacturing service provider for embedded systems and optoelectronics - focuses its activities on medical electronics, industrial electronics and intelligent control systems for LED lighting with high demands on light quality, color and long-term stability.

In addition to mixed signal ASIC design and custom base boards for COM modules from different vendors, accompany the application-specific development utilizing the JENCOLOR(r) color and spectral sensor expertise. MAZeT takes over the supply and servicing of customers' products for the entire product life cycle.

MTCSiCF and MCDC04EQ: the key components of the MTCS-INT-AB4

With the sensor board MTCS-INT-AB4 MAZeT offers the newest generation of OEM True Color sensor boards based on the JENCOLOR(r) filter technology. The sensor board can be directly attached to the light source via simple optical connectors. The board sends the measured color values to the attached electronic input via I²C interface (XYZ values based on CIE1931). The recorded input data can be used for any color management task.

The board includes the True Color sensor MTCSiCF as well as the analog-to-digital signal converter MCDC04EQ. Therefore, it is possible to utilize a real color feedback loop for LED solutions to eliminate color drifts caused by temperature fluctuations, aging or binning.

The task of the MTCS-INT-AB4 OEM sensor board is to assist companies without own hardware development to integrate a cost-efficient solution or to provide initial testing options.

Applications:
- Color control via feedback loop of multi-colored LEDs
- Color measurement for display calibration
- Sensor unit for colorimeters or photometers

Development Kit: MTCS-INT-AB4
For system and application testing, the MTCS-INT-AB4 sensor board is also available in form of a Development Kit. The sensor board is mounted in an ESD-protected casing and controlled via an I²C-to-USB interface. The sensor system can be easily configured and calibrated with the included PC test software. The specification of the sensor and the sensor electronics is utilized via flexible control files at PC level.
Therefore easy to learn and to integrate into an existing system. After successful validation of an application using the Development Kit, the programming of the sensor electronics can easily be mapped to a µC and the sensor board can be integrated directly via I²C.

About MAZeT
MAZeT GmbH is a leading European engineering and manufacturing service provider. The company was founded in 1992 and is based in Jena. MAZeT develops, manufactures and distributes customer specific devices, software and ASICs distributes own products of the trademark JENCOLOR(r). The broad technology offer and application know-how in this field of industry electronics and opto-sensor technology lets MAZeT GmbH be a competent and reliable service partner for every customized client-specific solution. Their expertise and components for custom applications are used throughout the entire sector of industrial metrology, control and automation as well as medical technology.

Diane Damer
MAZeT GmbH
Goeschwitzer Strasse 32
07745 Jena
Germany
T +49 3641 2809 039
F +49 3641 2809 12
E marketing|at|mazet.de

Mandy Ahlendorf
T +49 8151 9739098
E pr|at|alvacon.com

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release SENSOR+TEST and Lightfair: New JENCOLOR® solutions to control and manage LEDs in "lighting/back-light" applications here

News-ID: 287167 • Views: 3575

More Releases from MAZeT GmbH

ams acquires MAZeT
ams acquires color and spectral sensing specialist MAZeT to extend its leadership in advanced optical sensing. Strategic transaction will drive color and spectral sensing growth opportunities in industrial, automotive and medical applications. ams AG (SIX: AMS), a leading provider of high performance sensors and analog ICs, has closed the transaction to acquire 100% of the shares in the color and spectral sensing systems specialist MAZeT GmbH for an undisclosed amount in cash. The strategic
Absolute Color Measurement via integrated True Color Sensor
MAZeT introduces Evaluation Board and MTCS-INT-AB5 Development Kit for MTCS-CDCAF Color Sensor MAZeT GmbH, the development and manufacturing services provider for embedded systems and optoelectronics, has introduced the MTCS-INT-AB5 sensor board for the fully integrated MTCS-CDCAF sensor chip from the JENCOLOR® product line. MAZeT offers this sensor board as both an evaluation board for system and application tests and as part of a development kit. “MAZeT’s MTCS-INT-AB5 sensor board is another
Sensor+Test 2016: MAZeT Presents New JENCOLOR® Color Sensor for Lighting Applic …
The fully integrated MTCS-CDCAF sensor chip solution: Guarantees defined light MAZeT GmbH, the development and manufacturing services provider for embedded systems and optoelectronics, will be presenting its latest light regulation products at this year’s SENSOR + TEST. This international trade fair is being held from 10 to 12 May 2016 in Nuremberg; MAZeT GmbH will be located at Booth 457 in Hall 1. MAZeT will also be presenting its latest
MTCS-C3 Colorimeter: Test system for LED quality control, color measurement and …
CIE1931 XYZ Colorimeter board for color testing applications The new MTCS-C3 product family enables users to implement their own True Color Colorimeter into lighting, backlight, LED tests, color selection or other applications. The MTCS-C3 is ideal to measure color coordinates (XYZ), CCT or brightness levels. The sensor system is based on the JENCOLOR® standard components MTCSiCF (True Color sensor) and MCDC04 (Signal converter). The sensor is based on the CIE1931

All 5 Releases


More Releases for Kit

CAS Dataloggers Offers New Compressor Monitoring Kit
Help Prevent Process Delays with a Single Solution Need a way to help avoid costly process delays and shutdowns? CAS DataLoggers has the solution! Our new Compressor Monitoring kit is a single solution which logs temperature, runtime, current consumption and voltage. The new kit also contains probes for measurement, a datalogger to take and store the readings, and built-in software to analyze the data. Our kit is a cost-effective way to monitor
New Process Monitoring Kit Replaces Legacy Systems
Sensors, Data Logger and Software—All in One! As your plant or factory’s PLCs and SCADA legacy systems gradually develop issues, they pose a risk to your production and to the safety of your machinery. If you need to replace a legacy system, or if you’re one of our previous customers, CAS DataLoggers has the solution. Our new Process Monitoring Kit comes complete with sensors, software, and a Series 3 dataTaker DT80
Budget-friendly FlexRay Analysis Kit
With the new FR-IB100/PCIe FlexRay card and the multibusAnalyser IXXAT enables customers to set-up a low-cost analysis platform for FlexRay devices and systems. The multibusAnalyser for Windows 2000/XP/Windows7 allows to send FlexRay messages for stimulation or configuration of bus nodes very easily by using pre-defined transmission lists. Received messages can be displayed in scroll or overwrite mode, whereas changed message content is highlighted in color. Physical signals contained within the FlexRay
Newport Announces Terahertz Pulse Generation Kit
Newport Corporation, a worldwide leader in laser and photonic solutions, introduces the new terahertz (THz) pulse generation kit using a sub-35-fs Ti:sapphire amplifier system. The kit can be easily integrated with a Ti:sapphire amplifier to generate terahertz pulses which can be further used for linear, nonlinear, and time-resolved spectroscopy applications. The THz pulse generation kit utilizes standard Newport optics, opto-mechanics, manual stages, and CONEX™-based motorized solutions to provide high
Dilyx Launches Kit for Improved Protein Solubility
Seattle, WA, 17 November, 2010 - Dilyx Biotechnologies, LLC announces the launch of the OptiSol Protein Solubility Screening Kit, allowing research scientists to aggregation-proof their protein samples. The resulting data saves effort and money because it informs life science researchers on how to best treat specific samples for storage or analysis. Find more information at http://www.dilyx.com/protein-solubilization-kit/ Since protein aggregation is the number one cause of inadvertent protein sample loss, Dilyx’
Boom! Magazine 2010 Media Kit Now Available
Boom! Magazine 2010 Media Kit Now Available Several New Series Introduced CARY, N.C. (January 21, 2010)—Barbara Petty, publisher of Boom! Magazine (BoomNC.com), a monthly publication dedicated to the active lifestyle of those 45 and older, announces the release of the 2010 media kit. New series on Phase II living, finance and health highlight the new additions for readers this year. The media kit can be downloaded at Tinyurl.com/Boom-2010MediaKit. The publication’s 2010 lifestyle