ELCON DEMONSTRATES AT THE FTTH CONFERENCE IN STOCKHOLM HOW OPERATORS CAN USE INVESTMENTS FOR FIBRE ROLLOUTS TO OPTIMIZE THEIR NETWORKS AND SHORTEN ROLLOUT TIMES.
Network operators around the world are forced to roll out fibre in their access networks enabling them to fulfil the rapidly growing end users´ demand for higher bandwidth and faster internet connections. This huge challenge for network operators offers a unique chance to optimise the access network for the next decades. ELCON is demonstrating the following innovations at the FTTH Conference in Stockholm, booth S20 on the 19th and 20th February 2014:
• The FTTHomebox: an Open Access-ready fibre termination, which allows for reliable performance without any service intervention for 20+ years;
• ELCON´s RPS 1600, a power feeding sytem, which improves rollout times and helps network operators to save up to 40% of their fibre rollout costs;
• The high-performance series of FOS 1000 home gateways, which enable operators to offer a very flexible end user service portfolio with a single CPE;
• A positive business case for migrating ISDN small medium enterprise voice customers (up to 8 times basic rate interfaces), to “All IP” networks can be enabled with ELCON´s BIG 5530;
• The latest innovation from our research labs: ELCON´s CoolPOF prototype can transmit more than 950 Mbps over a low-cost plastic optical fibre cable to be installed by the end user
Hartmannsdorf, February 2nd, 2014
The increasing demand for higher bandwidth and faster internet connections force network operators to permanently optimize and redesign their networks. To fulfil the end-user demands, fibre needs to be rolled out in access networks and terminated much closer to the end-customer. This is a big challenge for network operators who have hard times to plan these massive investments by ensuring a return of investment in short time.
“Any investment in a telecoms network should result in an optimisation of rollout and operational costs in the longer term. ELCON´s latest product innovations are focused to lower the total cost of ownership (TCO). We believe that fibre access networks should be rolled out cost-efficiently, but not at any cost. The added value of fibre access network lies in our view of network operations and the management of Open Access”, says Werner Neubauer, CEO of ELCON.
A pre-conference workshop titled “Considerations to secure the value of your fibre network in the long term” has been organized by ELCON together with its partners. This workshop will take place under the umbrella of the FTTH Council Europe as a pre-conference workshop on the 18th of February 2014 from 1pm to 6pm.
At the Stockholm FTTH Conference ELCON will show on the 19th and 20th February 2014 on booth S20 its latest innovations, which help operators to overcome the challenges when rolling out fibre in access networks.
ELCON Systemtechnik GmbH supplies innovative and future-proof telecommunication solutions in the area of access networks and power distribution. With the focus on network optimisation, ELCON is a leader for line powering and network termination for residential, business and mobile services. More than 10 million ELCON products have been installed in 34 countries by the largest telecom operators worldwide. ELCON, founded in 1990 and headquartered in Germany, operates two research and development centres, a modern manufacturing plant in Germany, and sales and service centres in Germany, France, Italy, United Kingdom and Austria. For more information please go to:
ELCON Systemtechnik GmbH
Phone: +49 3722 7351-331
This release was published on openPR.
Permanent link to this press release:
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release FTTH Council here
News-ID: 281502 • Views: 3213
More Releases from Elcon Systemtechnik GmbH
Albis Technologies and ELCON Systemtechnik to Showcase Wider Product Portfolio a …
Albis and ELCON Offer Broader Range of Telecommunications Solutions, Including All-IP Voice Migration, Residential FTTH/B Gateway, and Remote Power Feeding ZÜRICH — June XX, 2015 — At ANGA COM 2015, booth 10.1/M15, Albis Technologies and ELCON Systemtechnik will showcase an improved and combined product portfolio, demonstrating breakthroughs in all-IP voice migration with ISDN over Internet, remote powering for FTTx and mobile cell nodes, and hosted IPTV and OTT video
ELCON Secures Technological Advantage in Optical Networking
ELCON and its research partners presented a tunable WDM-PON prototype and an exceptionally energy-efficient POF system at Optical Fibre Communication Conference 2015 Hartmannsdorf, April 8, 2015 March 22-26 ELCON Systemtechnik and its partners presented two promising research projects – TUCAN and CoolPOF – at the Optical Fiber Communication Conference 2015 in Los Angeles. OFC is the world’s most influential optical networking and telecommunications event with about 12,500 attendees, 1,100 presentations and 560
ELCON AT THE TELCO ENERGY & INFRASTRUCTURE EFFICIENCY CONFERENCE
ELCON is demonstrating its Remote Powering solution at the Telco Energy & Infrastructure Efficiency Conference in London – 15 Hatsfields on the 11th and 12th November 2014. Hartmannsdorf, November 7th, 2014 With the strong end-user demand for higher bandwidth, faster internet connections and the enormous price pressure of competitors, broadband access networks need to be optimised permanently. Careful energy distribution and management is the key to success in controlling costs and
ELCON AT THE BROADBAND WORLD FORUM 2014 IN AMSTERDAM
„Power to complete networks“: ELCON is introducing its latest revolutionary solutions to optimize Broadband Access Networks. • All-IP ISDN NETWORK MIGRATION offers the most cost-efficient solution on the market to migrate ISDN customers to “All IP” networks. • Remote Powering Systems for FTTC Networks and „Small Cell“ Applications with an energy efficiency of up to 90%. • Fibre to the Home – The ELCON 1000 series is a high-performance fibre gateway for multiple applications in the