Magnetic Particle Market Size, Growth, Trends | Industry Report, 2022 - 2028|MQI, Aichi Steel

 

Ferrites
Commonly known as Ceramics, have been in production since the 1950's.They are primarily made from Iron Oxide (FeO) and the addition of Sr and Ba through a calcining process. They are the least expensive and most common of all magnet materials. Primary grades are C1, C5 and C8. They are mostly used in motors and sensors.

Magnetic ferrite powder are suitable for producing different grades of hard ferrite magnets by wet pressing or dry pressing production process. According to the needs of clients, we could supply the magnetic ferrite powders in different granularity, The magnetic ferrite powder can be classified as isotropic magnetic ferrite powder and anisotropic magnetic ferrite powder.

Alnico
These are one of the oldest commercially available magnets and have been developed from earlier versions of magnetic steels. Primary composition is Al, Ni and Co, hence the name. Although they have a high remanent induction, they have relatively low magnetic values because of their easy of demagnetization. However, they are resistant to heat and have good mechanical features. Common applications are in measuring instruments and high temperature processes such as holding devices in heat treat furnaces.

AlNiCo magnetic powder is made of AlNiCo magnet and through cracked it into required particle size. The character is temperature coefficient of Br is small. The powder mainly used in raw material of bonded magnet, plastic magnet; all kinds of SmCo fault detection; magnetic printing and other highly temperature sensitivity fields.

Samarium Cobalt
They belong to the rare earth family because of the Sm and Co elements in their composition. Magnetic properties are high and they have very good temperature characteristics. They are also more expensive than the other magnet materials. They come mostly in two grades: SmCo5 and Sm2Co17,also known as SmCo 1:5 and 2:17. Common uses are in aerospace, military and medical industries.

SmCo Powder Samarium Cobalt powder SmCo magnetic powder Rare Earth Magnet powder use for producing Polymer bonded SmCo magnets by compressing moulding.

Neodymium(NdFeB)
Also known as Neo, these are the strongest and most controversial magnets. They are in the rare earth family because of the Nd, B, Dy, Gaelements in their composition. A relatively new group of commercial magnets, they are controversial because they are the only magnets that have been patented for both composition and processing. The patent and licensing issues are important and will be discussed later in this guide

Neodymium magnet powder can be used to the automobile industry, office automation, automotive. DC brush-type motors. multi-pole stepper and spindle motor applications. Magnetic paints, magnetic printable substrates, magnetic films, medical diagnostics and therapeutics, video tape, copy toners, fingerprinting, sensors, fuel injectors, permanent magnets, nano level fluid sealing, electric toys and magnetic curing products, etc.

Since Ferrites Magnetic Particle and Neodymium(NdFeB) Magnetic Particle are the most commonly used magnetic raw materials, this report mainly focuses on these two products

Ferrites
Commonly known as Ceramics, have been in production since the 1950's.They are primarily made from Iron Oxide (FeO) and the addition of Sr and Ba through a calcining process. They are the least expensive and most common of all magnet materials. Primary grades are C1, C5 and C8. They are mostly used in motors and sensors.

Magnetic ferrite powder are suitable for producing different grades of hard ferrite magnets by wet pressing or dry pressing production process. According to the needs of clients, we could supply the magnetic ferrite powders in different granularity, The magnetic ferrite powder can be classified as isotropic magnetic ferrite powder and anisotropic magnetic ferrite powder.

Alnico
These are one of the oldest commercially available magnets and have been developed from earlier versions of magnetic steels. Primary composition is Al, Ni and Co, hence the name. Although they have a high remanent induction, they have relatively low magnetic values because of their easy of demagnetization. However, they are resistant to heat and have good mechanical features. Common applications are in measuring instruments and high temperature processes such as holding devices in heat treat furnaces.

AlNiCo magnetic powder is made of AlNiCo magnet and through cracked it into required particle size. The character is temperature coefficient of Br is small. The powder mainly used in raw material of bonded magnet, plastic magnet; all kinds of SmCo fault detection; magnetic printing and other highly temperature sensitivity fields.

Samarium Cobalt
They belong to the rare earth family because of the Sm and Co elements in their composition. Magnetic properties are high and they have very good temperature characteristics. They are also more expensive than the other magnet materials. They come mostly in two grades: SmCo5 and Sm2Co17,also known as SmCo 1:5 and 2:17. Common uses are in aerospace, military and medical industries.

SmCo Powder Samarium Cobalt powder SmCo magnetic powder Rare Earth Magnet powder use for producing Polymer bonded SmCo magnets by compressing moulding.

Neodymium(NdFeB)
Also known as Neo, these are the strongest and most controversial magnets. They are in the rare earth family because of the Nd, B, Dy, Gaelements in their composition. A relatively new group of commercial magnets, they are controversial because they are the only magnets that have been patented for both composition and processing. The patent and licensing issues are important and will be discussed later in this guide

Neodymium magnet powder can be used to the automobile industry, office automation, automotive. DC brush-type motors. multi-pole stepper and spindle motor applications. Magnetic paints, magnetic printable substrates, magnetic films, medical diagnostics and therapeutics, video tape, copy toners, fingerprinting, sensors, fuel injectors, permanent magnets, nano level fluid sealing, electric toys and magnetic curing products, etc.

Since Ferrites Magnetic Particle and Neodymium(NdFeB) Magnetic Particle are the most commonly used magnetic raw materials, this report mainly focuses on these two products.
Highlights
Considering the economic change due to COVID-19 and Russia-Ukraine War Influence, the global Magnetic Particle market is projected to reach US$ 1906.1 million by 2028 from an estimated US$ 1596.3 million in 2022, at a CAGR of 3.0% during 2023 and 2028.
Global NdFeB Magnetic Particle key players include MQI, Zhao Ri Ke, Galaxy Magnets, Aichi Steel, Yuhong, etc. Global top five manufacturers hold a share over 80%.
China is the largest market, followed by Japan.

Get a PDF Sample Copy of the Report to understand the structure of the complete report: (Including Full TOC, List of Tables & Figures, and Chart) :

https://www.qyresearch.com/sample-form/form/4985190/Global-Magnetic-Particle-Market-Size-Manufacturers-Supply-Chain-Sales-Channel-and-Clients-2022-2028
 
Complete study of the global Magnetic Particle market is carried out by the analysts in this report, taking into consideration key factors like drivers, challenges, recent trends, opportunities, advancements, and competitive landscape. This report offers a clear understanding of the present as well as future scenario of the global Magnetic Particle industry. Research techniques like PESTLE and Porter's Five Forces analysis have been deployed by the researchers. They have also provided accurate data on Magnetic Particle production, capacity, price, cost, margin, and revenue to help the players gain a clear understanding of the overall existing and future market situation.

 
Segmental Analysis

The report has classified the global Magnetic Particle industry into segments including product type and application. Every segment is evaluated based on growth rate and share. Besides, the analysts have studied the potential regions that may prove rewarding for the Magnetic Particle manufacturers in the coming years. The regional analysis includes reliable predictions on value and volume, thereby helping market players to gain deep insights into the overall Magnetic Particle industry.

Global Magnetic Particle Market Segment By Type:

Ferrites
NdFeB

Global Magnetic Particle Market Segment By Application:

Auto
Household Appliance
Computer
Electronic Toys
Electroacoustic Product
Military

Competitive Landscape

It is important for every market participant to be familiar with the competitive scenario in the global Magnetic Particle industry. In order to fulfill the requirements, the industry analysts have evaluated the strategic activities of the competitors to help the key players strengthen their foothold in the market and increase their competitiveness.

Key companies operating in the global Magnetic Particle market include: MQI, Aichi Steel, Zhao Ri Ke, Galaxy Magnets, Yuhong, Huiling, Western Magnet, San Huan, Hoosier Magnetics, Todakogyo, HIMAG, DMEGC Magnetics, Zhejiang Ante, Maanshan CY, BGRIMM Magnetic, Shunde Baling, MGC, Comc Technology
 
Key questions answered in the report:

What is the growth potential of the Magnetic Particle market?
Which product segment will grab a lion's share?
Which regional market will emerge as a frontrunner in the coming years?
Which application segment will grow at a robust rate?
What are the growth opportunities that may emerge in the Magnetic Particle industry in the years to come?
What are the key challenges that the global Magnetic Particle market may face in the future?
Which are the leading companies in the global Magnetic Particle market?
Which are the key trends positively impacting the market growth?
Which are the growth strategies considered by the players to sustain their hold in the global Magnetic Particle market?
 
Enquire Customization in The Report: 
 
https://www.qyresearch.com/customize-request/form/4985190/Global-Magnetic-Particle-Market-Size-Manufacturers-Supply-Chain-Sales-Channel-and-Clients-2022-2028
 
 

Contact Us:
QY Research, INC.
17890 Castleton,
Suite 218,
City of Industry, CA - 91748
USA: +1 626 295 2442
Email: enquiry@qyresearch.com
Web: http://www.qyresearch.com

About Us:

QYResearch always pursuits high product quality with the belief that quality is the soul of business. Through years of effort and supports from huge number of customer supports, QYResearch consulting group has accumulated creative design methods on many high-quality markets investigation and research team with rich experience. Today, QYResearch has become the brand of quality assurance in consulting industry.
 

This release was published on openPR.