openPR Logo
Press release

Corelis JTAG Tools Advance Manufacturing Test for Red Lion Controls

10-22-2013 06:14 PM CET | IT, New Media & Software

Press release from: Corelis, Inc.

Complete ScanExpress JTAG/boundary-scan system reduces cost and improves production test time.

Cerritos, CA, October 21, 2013 – Corelis, Inc., the leading supplier of high-performance boundary-scan test and measurement tools, announced the successful deployment of Corelis ScanExpress tools at Red Lion Controls for testing Human Machine Interface (HMI) products. The combination of ScanExpress boundary-scan and JTAG Embedded Test (JET) tools enabled rapid development of fast, non-intrusive structural and early functional tests for Red Lion’s complex embedded systems.

Through the implementation of Corelis’ industry-standard ScanExpress development and test solution early in the product development process, Red Lion controls leveraged the advanced diagnostic capabilities to identify a hard-to-find fault during prototype development. The same tests used for prototype verification were then carried over and extended into production. The system was automated by integrating Corelis’ application programming interface (API) into Red Lion’s existing test executive system.

“The integration of boundary-scan and JET tests into Red Lion’s existing test processes provided immediate value in Red Lion’s manufacturing processes,” explained Ryan Jones, Senior Technical Marketing Engineer at Corelis. “JET not only significantly improves in-system-programming (ISP) speed, but it also allows for system functional tests to be moved earlier in the test process without the need for functional boot code.”

The complete story can be downloaded from the Corelis testimonial page. Additional product information, tutorials, and educational demonstrations can be viewed on Corelis’ web site at www.corelis.com.

# # # #

Copyright © 2013 Corelis, Inc. All rights reserved.

All company and product names may be trade names, trademarks, or registered trademarks of the respective owners with which they are associated. Features, pricing, availability, and specifications are subject to change without notice.

Corelis, Inc., a subsidiary of Electronic Warfare Associates, Inc., offers bus analysis tools, embedded test tools, and the industry’s broadest line of JTAG/boundary-scan software and hardware products combining exceptional ease-of-use with advanced technical innovation and unmatched customer service. Since its founding in 1991, Corelis has delivered a diverse range of electronic test equipment solutions for customers across a wide range of industries, including aerospace, defense, medical, manufacturing, networking, and telecommunications. Today, Corelis continues that trend with focus on product ease-of-use and dedication to customer service.

Corelis, Inc.
13100 Alondra Blvd.
Cerritos, CA 90703
562-926-6727

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Corelis JTAG Tools Advance Manufacturing Test for Red Lion Controls here

News-ID: 273540 • Views: 2124

More Releases from Corelis, Inc.

Corelis Introduces New Version 8.5 Boundary-Scan Tool Suite
New Software update includes Linear Technology PSM support, Continuous sample data logging, and new CPU support packages. Cerritos, California, October 3, 2017 – Corelis, Inc., the leading supplier of high-performance boundary-scan test and measurement tools, announced today the availability of version 8.5 of its ScanExpress™ Boundary-Scan Tool Suite. The new software update features support for continuous logging of sampled data to file in ScanExpress Debugger, multiple user interface enhancements for the
Corelis Introduces New Version 8.4 Boundary-Scan Tool Suite
New software update includes Cluster Wizard, Dynamic GPIO control, and new CPU support packages. Cerritos, California, December 16, 2016 – Corelis, Inc., the leading supplier of high-performance boundary-scan test and measurement tools, announced today the availability of version 8.4 of its ScanExpress™ Boundary-Scan Tool Suite. The new software update features a new ScanExpress TPG Cluster Wizard for logic cluster test creation, support for dynamic JTAG controller GPIO control in ScanExpress Debugger,
Corelis to Demonstrate Latest JTAG & Serial Bus Test Products at Aerospace Elect …
New Developments in JTAG/Boundary-Scan Test & Serial Bus Protocol Products on Display at Premier Aerospace Industry Event May 24-26, 2016 in Pasadena, California CERRITOS, Calif. – April 19, 2016 – Corelis, Inc., the leading supplier of high-performance boundary-scan test and measurement tools, will exhibit its latest ScanExpress JTAG/Boundary-scan test software suite this May in booth 1032 at the Aerospace Electrical Systems Expo, co-located with the Space Tech Expo in Pasadena, California.

More Releases for Corelis

Corelis Introduces New Version 8.4 Boundary-Scan Tool Suite
New software update includes Cluster Wizard, Dynamic GPIO control, and new CPU support packages. Cerritos, California, December 16, 2016 – Corelis, Inc., the leading supplier of high-performance boundary-scan test and measurement tools, announced today the availability of version 8.4 of its ScanExpress™ Boundary-Scan Tool Suite. The new software update features a new ScanExpress TPG Cluster Wizard for logic cluster test creation, support for dynamic JTAG controller GPIO control in ScanExpress Debugger,
Corelis Adds JET Support for TI Sitara ARM Microprocessors
Non-intrusive functional test solution for high performance ARM microprocessors. Cerritos, CA, December 6, 2011 – Corelis, Inc., the leading supplier of high-performance JTAG test and measurement tools, announced today ScanExpress JET™ support for Texas Instruments Sitara™ ARM® Cortex™-A8 and ARM9™ microprocessors, specifically the AM37x, DM37x, and AM18x families. ScanExpress JTAG Embedded Test (JET) is a cutting edge test methodology providing at-speed testing of embedded processor-based electronic printed circuit boards and systems
Corelis Announces JTAG Embedded Testing for AMD Processors
Complete functional test solution for Athlon, Turion, and Opteron product families. Cerritos, CA, October 17, 2011 – Corelis, Inc., the leading supplier of high-performance JTAG test and measurement tools, announced today ScanExpress JET support for AMD embedded processors. Supported AMD processor families include Turion™ II Neo, Athlon™ II Neo, Opteron™ 4100, and Opteron™ Quad-Core (socket Fr5). These processors represent high-performance, low power processing for edge-of-enterprise markets including storage and telecommunications, as
Corelis Offers Integrated JTAG Solution with National Instruments
High Speed Digital I/O Platform Doubles as a JTAG Controller. Cerritos, CA, August 23, 2011 – Corelis, Inc. today announced support for National Instruments High Speed Digital I/O (HSDIO) instruments with Corelis’ ScanExpress suite of high-performance JTAG test and measurement tools. The marriage of National Instruments hardware with Corelis software provides a seamless path for deploying boundary-scan test and programming capabilities on existing PCI, PXI, and PXIe test platforms. Boundary-scan integration support
Corelis JET Amplifies QSC Audio Products Production Test
Corelis JTAG Embedded Test (JET) reduces test time, adds non-intrusive functional test. Cerritos, CA, May 9, 2011 – Corelis, Inc., a leading supplier of high-performance JTAG test and measurement tools, announced today the successful integration and deployment of the ScanExpress JTAG Embedded Test (JET) functional test system at the production facilities of QSC Audio Products, LLC in Costa Mesa, California. QSC, a leader and pioneer in professional audio products for over
Corelis Releases New CD Version 7.5 Boundary-Scan Tool Suite
CD Features IEEE-1149.6 Test Development Automation, Expanded Scripting. Cerritos, CA, April 11, 2011 – Corelis, Inc., a leading supplier of high-performance boundary-scan test and measurement tools, announced the availability of the latest version of its powerful ScanExpress Boundary-Scan Tool Suite. The new Version 7.5 CD accelerates IEEE-1149.6 test development with new automation features. ScanExpress TPG now includes automatic identification and classification of resistors and capacitors involved in IEEE-1149.6 high speed, AC-coupled,