Funeral home cremation machine manufacturer, cremation equipment supplier, cremation machine prices

We are leading manufacturer of high quality cremation equipment with a global customer base. Serving the human and animal markets since the turn of the century, we have been committed to the needs of our customers by providing superior crematory designs, innovative features and exceptional craftsmanship along with a full assortment of accessories and attentive service. In addition to the level of quality and reliability that our products provide

Funeral home flat cremation machine technical parameters
https://wholsale9.com/contact/
Technical parameters of flat-panel cremation machine

1. Fuel used: light diesel/natural gas.

2. The two-way crawler corpse delivery vehicle is adopted, and there are no tracks and no tow lines in the front hall and the preparation room.

3. Low-voltage electrical appliances are recommended to use Siemens, Schneider, ABB or products with product grades not lower than the above-mentioned brands.

4. The main combustion chamber is ignited by an automatic burner, and the main burner must be able to adjust the angle for combustion.

5. Smoke exhaust method: the jet chimney structure is adopted, the total height of the ejection chimney is about 8 meters, the ejection base and the chimney are made of stainless steel plate, and the thickness is not less than 2.5mm.

6. The fan adopts shock absorption positioning, and the air outlet adopts rubber expansion flange to connect the sleeve, and is equipped with a muffler device.

7. The plate exterior decoration adopts high-quality stainless steel plate not less than 1 mm.
https://wholsale9.com/funeral-manufacturing/

8. Refractory bricks and refractory cement must be qualified products. .

9. The working pressure range of the furnace: -5~-30Pa.

10. The temperature rise of the surface of the furnace body is lower than 50℃ in continuous use, and the temperature rise of the handle of the observation hole is lower than 65℃.

11. When cremating a normal body, the smoke blackness value should not be greater than the Ringelmann level.

12. The PLC control system of the cremation machine should have three modes: computer automatic control, semi-automatic and manual control, and the three modes can be switched freely without interference.

13. The upper computer should be a TFT liquid crystal touch screen, which displays the operating status of each part of the cremator working time, various parameters (including main combustion temperature, reburning temperature, furnace negative pressure, single cremation time, cumulative cremation time, and each control display screen. Must be on multiple levels.

14. The lower computer must be a brand programmable controller to keep the operation reliable and stable.

15. Automatic control and manual operation of the corpse delivery vehicle, furnace door and preparation door.

16. The galvanic couple for the furnace should be a high temperature ceramic thermocouple.

17. The limit switch should be made of high-quality products at home and abroad.

18. Furnace wires must be of the highest quality.

19. There are LED displays for the operation and shutdown of the furnace.

20. Outer size of furnace: L*W*H=3400*2200*3200mm (±3%).

21. Dimensions of the two-way corpse delivery vehicle: L*W*H=3700*780*790mm (±3%).

22. Dimensions of the preparation door: H*W=1850*540mm (±3%).

23. Blower: Air volume: 2700nm3/h, wind pressure: 10700Pa, motor power: 7.5KW.

24. Induced draft fan: Air volume: 8881NM3/h, wind pressure: 2087 Pa, motor power: 7.5Kw.

25. Total power: no more than 20Kw/unit.

26. Energy consumption: light diesel oil is less than 10kg liters per unit, and natural gas is less than 25-30 cubic meters per hour (continuous cremation meter).

27. Incineration time: less than 30 minutes/tool ​​(continuous cremation).

28. Service life of the whole machine: ≥10 years.

29. The energy-saving system has the same life as the furnace body.

30. The refractory temperature of the brick structure in contact with the flame surface of the main combustion chamber and the re-combustion chamber can withstand 1000 ℃.

31. During the overhaul, the cremator should not be less than 3,000.

32. The ash joint of fire bricks in the main combustion chamber shall not be greater than 3mm.

EMAIL:pandacuadsem@gmail.com
https://wholsale9.com/
PHONE:+86-15079584532
WHATSAPP:+86-15079584532
WECHAT:+86-15079584532

HUMAN CREMATION EQUIPMENT
High Quality - High Production - High Efficiency
Equipment - Reliable - Safe - Environmentally Friendly
Operation - Experienced - Responsive - Fairly Priced - Service

ANIMAL CREMATION EQUIPMENT
Offering a variety of models to serve the needs of pet crematories, veterinary clinics, animal care/control, humane societies, animal diagnostic labs, pet cemeteries, livestock farmers and much more!

CUSTOMER SUPPORT: SERVICE/PARTS
We offer installation and service support with every cremator. Additionally, we service other manufacturer's makes and models.

This release was published on openPR.