Electrical corrosion protection - Prevent hydrogen sulphide corrosion in electrical and electronic equipment
SuperCORR A is a proven and cost-effective way to prevent or inhibit corrosion from destroying electronics and electrical components. Adverse work environments where corrosive gases such as hydrogen sulphide are found, can cause severe corrosion and rapid deterioration of electronic components and equipment, including connectors and switches.Lost productivity and revenue caused by plant and equipment downtime
Corrosion, in its many forms, costs both private and public sectors hundreds of billions of Euros a year to repair or replace electrical, electronics, or avionic components because of failures caused by corrosion. While all metals corrode, due to a number of different factors, there is no simple or single solution to the overall corrosion problem. However there are some very cost effective and proven ways to prevent corrosion and failures caused by corrosion and thereby reducing or eliminating associated costs and increasing safety which should be foremost in the mind set of any preventative maintenance programme manager.
SuperCORR A was specifically designed to lubricate and prevent corrosion in electrical fittings and connectors; electrical and avionic harness assemblies and connectors; electrical and electronic switches; close tolerance and dissimilar metal components; lighting connectors and sockets. A unique non-flammable "self-healing" ultra-thin film lubricant with a proprietary corrosion preventive compound that will not harden or break, is not a wax or oil-based product and is formulated without sulphates, chlorides or halogens.
SuperCORR A inhibits corrosion caused by exposure to both fresh and salt water moisture as well as the corrosive vapours from Sulphur dioxide (SO2), Nitrogen dioxide (NO2), Hydrogen Sulphide (H2S), Ammonia (NH3), and Chlorine (CL12) based gases found in waste water and sewer treatment plants, pulp and paper mills and plants, chemical and petroleum plants, maritime industry, aircraft/airline industry, military equipment including ships, aircraft, and rolling stock, auto industry, farming and agriculture industry, and the list goes on.
SuperCORR A extends the working life of electrical components and systems and other critical items by preventing the deterioration and/or failure caused by corrosion and can significantly reduce downtime, operating and maintenance costs as well as enhance safety. An ultra-thin film, water displacing lubricant and corrosion inhibiting compound SuperCORR A has undergone extensive testing by Battelle Labs as well as the U.S. Air Force and meets MIL-DTL-87177B (revised MIL-L-87177A) specification. SuperCORR-A is used by NATO (NATO NSN 8030-99-226-6966) to protect avionic, electrical, electronics, electrical switches and connectors and components from corrosion in both the military and civilian aircraft. Savings for the U.S. government alone is estimated to be in excess of $50 million per year.
SuperCORR A provides a superior lubrication coefficient and protects components against moisture, wear, general and fretting corrosion, surface static electricity, corona, and other electromigration problems. The super thin non-flammable lubricant film is only 7 microns (0.00028 inch) thick and is formulated to meet the RoHS directive. It is unexcelled in preventing deterioration and contamination on all surfaces of electronic equipment. The question for you is: What is the cost of
NOT using SuperCORR A in your preventative maintenance programme?
FURTHER INFORMATION
Please visit our website https://www.envirotech-europe.com/supercorr-a for information about other uses and applications for SuperCORR A.
Visit www.envirotech-europe.com/applications-and-case-studies for information about uses and applications for all EnviroTech Europe products. For more advice, please telephone us on +44 (0) 20 8281 6370 or use our website contact form.
All products are supplied and supported by EnviroTech Europe Ltd. Manufactured in the United Kingdom and available on short delivery times through our dedicated team of distributors worldwide.
EnviroTech Europe Ltd
Aissela, 46 High Street,
Esher, Surrey, KT10 9QY,
United Kingdom
The best solutions for vapour degreasing, corrosion protection, metal cleaning and surface treatment
EnviroTech Europe has the complete answer for the cleaning and preparation of metal, plastic, and composite surfaces ready for finishing by electroplating, painting and powder coating.
We can offer a range of approved products tailored to your industry, which are cost effective, energy efficient, safe for operators and the environment. Expert technical support and training is provided throughout Europe.
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Electrical corrosion protection - Prevent hydrogen sulphide corrosion in electrical and electronic equipment here
News-ID: 2662475 • Views: …
More Releases from EnviroTech Europe Ltd
PFAS-Free vapour degreasing solvent cleaner for electronics and electrical compo …
EnviroTech Europe have been supplying vapour degreasing solvent formulations for over 20 years, constantly responding to increasingly stringent regulatory requirements for environmental and safety laws and the need for improved cleaning standards. Our staff and distributors are trained to work with equipment suppliers to advise on the use of vapour degreasing solvents for the most satisfactory outcome. EnviroTech Europe have developed a new solvent cleaning formulation based on recent…
A range of premium quality drop-in alternatives to 3M™ Novec™ Engineered Flu …
ARE YOU AFFECTED BY THE PHASE-OUT OF 3M™ NOVEC™ ENGINEERED FLUIDS?
EnviroTech Europe now offers alternatives to all 3M™ Novec™ solvent cleaning fluids with our ProSolv® range. We understand the uniqueness of every precision cleaning application and provide free on-site visits, technical support and cleaning trials when required.
We can provide a full assessment of your current precision cleaning process to put in a plan to help ensure a seamless transition.
FUTURE-PROOF YOUR…
Next-generation PFAS-Free solvent cleaners from EnviroTech Europe - Innovation d …
Vapour degreasing, with or with-out ultrasonics, is the oldest, simplest and most effective solvent degreasing and metal cleaning process used today. It has until recently been subject to little change since it was first invented in the early part of the last century. In the UK, Europe, United States and other advanced economies, increasingly stringent legislation has been put in place to control emissions of VOCs (Volatile Organic Compounds),…
A range of drop-in replacements for 3M™ Novec™ Engineered Fluids from Enviro …
In December 2022, 3M™ announced their plans to stop producing per- and polyfluoroalkyl substances (PFAS) in its product line by the end of 2025.
This phase-out affects the following 3M™ product lines:
3M™ Novec™ Engineered Fluids
3M™ Fluorinert™ Electronic Liquids
ARE YOU AFFECTED BY THE PHASE-OUT OF 3M™ NOVEC ENGINEERED FLUIDS?
At EnviroTech Europe we can offer replacements with our ProSolv® range for all 3M™ Novec™ solvent cleaning fluids. We understand the…
More Releases for SuperCORR
Corrosion protection - SuperCORR A helps to reduce fretting corrosion on gas tur …
LP Gas Turbines are used throughout the world by extraction industries and manufacturing plants in remote and hostile locations for essential power production. Dusty and wet environments in deserts, mines, grinding mills, pulp and paper mills and on land or sea drilling rigs for gas and oil production. Turbines powering aircraft services while stationary connect and disconnect many times a day in extreme conditions. These applications and locations test…