Digital Pressure Test Gauge with New Reference Class Now Available by Martel Calibrators

Martel Electronics Corporation introduces the new BetaGauge PIR, Reference Class Digital Pressure Test Gauges. As with the original high accuracy BetaGauge PI gauges, the BetaGauge PIR takes the concept of a simple analog Test Gauge and combines it with the accuracy of digital technology. The new Reference Class gauges provide exceptional performance with ±0.04% of reading accuracy.

The Reference Class BetaGauge PIR digital test gauges are available six ranges — 30 psi Compound, 30 psig, 100 psig, 500 psig, 1,000 psig, and 3,000 psig. Setup of the BetaGauge PIR is fast and simple, through a menu-driven display, with minimal text and intuitive functions. This allows the Digital Pressure Test Gauge to be used anywhere in the world without the need for multilingual displays. Pressure readings are displayed in 18 different standard engineering units, or in user defined custom units, eliminating complicated conversion calculations. Readings are displayed on a 5-1/2 digit, 0.65” high digital display and companion percent-of-range bar graph. Accuracy is temperature-compensated over a 0 to +50 °C range. The internal temperature sensor measurement can be displayed in degrees Celsius or Fahrenheit.

The PIR digital test gauges provide an unmatched feature set, offering the user many options for ease-of-use. The reading sample rate can be adjusted to match the type of measurement, such as pressure switch threshold points, instrument-grade readings, filtered readings, and a power-saving 1 reading per 2 seconds “sleep” mode. A MIN/MAX function instantly recalls pressure reading extremes. In addition to a Zero function, large residual system pressures can be nulled using the TARE adjustment. When combined with custom engineering units, the TARE adjustment allows the BetaGauge PIR to be used in a variety of liquid level and volume measurements, easily reading units of interest directly, such as gallons in a tank. Password-protected field calibration may be initiated through the keypad. An auto shutoff feature may be enabled for a preset interval to extend battery life. Damping can be set to integrate readings to accommodate pulsating sources, such as plant air. An RS232 port allows pressure reading data to be extracted directly from the gauge for off-line analysis. A protective rubber boot is provided as standard to help protect the gauge from damage if dropped.

A number of options are available for the BetaGuage PIR Digital Pressure Gauge making the gauge suitable in virtually any application. An optional 24 VDC external power input is available for applications where the gauge will be permanently incorporated into a process line. A self-contained calibration kit is available which includes a BetaGauge PIR, hand pressure pump, and associated fittings.

Mr. Bill Modlin, VP Sales and Marketing
Martel Electronics Corporation
1F Commons Drive
Londonderry, NH 03053 USA
Toll Free: (800) 821-0023
Phone: (603) 434-1433
Fax: (603) 434-1653
Email: sales@martelcorp.com

Martel Electronics Corporation and the Beta Calibrators Division offer a diversified line of hand-held and bench calibrators, process instruments, process indicators, power supplies, meters and displays, and test and measurement instruments manufactured to the highest quality standards for the process industry and OEM applications.

This release was published on openPR.