openPR Logo
Press release

Inspection solutions for packed products

Due to its compact design, the S+S metal detection system VARICON can be easily integrated in production lines. (photo S+S)

Due to its compact design, the S+S metal detection system VARICON can be easily integrated in production lines. (photo S+S)

X-ray and inductive technology in a on-site test at the FachPack trade fair stand of S+S

At the FachPack 2007 Exhibition in Nuremberg, S+S Separation and Sorting Technology GmbH will present technologically sophisticated metal and foreign-body separators. Among others, S+S will present the RAYCON X-ray system, and the conventional metal detection system VARICON in a direct comparison. Interested visitors may bring along their product to the S+S stand, hall 9, stand 9-229 and perform a real time test to determine which inspection solution is the best for their requirements. S+S will provide special check-cards.

The RAYCON X-ray system can detect a wide variety of foreign particles: Metal contaminants, glass, ceramics, stones, rubber, bones, PVC, etc. The system is used for the final inspection of packaged products. Aluminium-coated packing materials or metallised films are no problem at all. The system also permits the simultaneous inspection of different products and packaging even in parallel production lines. Out of line or misplaced products are also inspected and do not cause error messages. The RAYCON X-ray system guarantees optimal image processing at a high throughput rate of up to 600 packing units per minute.

The VARICON metal detection system using conventional balanced coil technology detects all magnetic and non-magnetic metal contamination – even contaminants that are enclosed within the product. This system is used for the final inspection at the end of the line after packing, during weighing, or during labelling. Due to the compact design of the search coil the VARICON systems can be easily integrated in existing conveyor belt lines. In most cases installation requires minimal modifications often without interrupting operation.

The advantage of integrating these inspection systems in the outgoing goods department is that the products are already packed here, and that further contamination with foreign particles in the production process is not possible. Both the RAYCON and the VARICON system use pusher or air jet rejection with a lockable collecting container for the separation of out of specification products. Data recording and archiving can be provided compliant with IFS and HACCP requirements.

S+S Separation and Sorting Technology GmbH
Brigitte Rothkopf
Regener Straße 130
D-94513 Schönberg
Tel. +49-(0)8554-308 274
Fax +49-(0)8554-2606
e-mail: brigitte.rothkopf@se-so-tec.com
www.se-so-tec.com

S+S Separation and Sorting Technology GmbH of Schönberg, Bavaria manufactures machines and systems for the detection and sorting of contaminants to suit a wide range of applications and industries. Product sales are primarily in the plastics, food, chemical, pharmaceutical, wood, textile and recycling industries. S+S is one of the world’s leading suppliers with subsidiaries in England, the USA, France, China, India and Singapore, as well as partner companies and distributors in over 40 countries worldwide. The main factory in Schönberg employs over 190 people and 2006 turnover exceeded 20 million Euros.

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Inspection solutions for packed products here

News-ID: 25431 • Views: 2067

More Releases from S+S Separation and Sorting Technology GmbH

S+S Metal Detectors for Turkish Coffee From Egypt
Al-Yemeni Cafe, a Cairo based Egyptian company, is a leading producer of ground Turkish coffee. Operating from its own 10,000 square metre factory since 1940, Al-Yemeni Cafe employs the latest state-of-the-art machinery to improve product quality and ensure customer satisfaction. The plant complies with all IFS, ISO 9001 and HACCP standards and holds many quality accreditation from external organisations. It was particularly important for this application to select metal
Saving costs with magnet separators
S+S whitepaper provides information about magnet technology especially for the chemical and pharmaceutical industries Schönberg, July 2013 S+S has prepared a white paper on the subject of "Reduced process costs in the chemical and pharmaceutical industries with magnet separators". This white paper describes the application possibilities and the function of magnet separators, and the advantages for the chemical and pharmaceutical industries, which essentially are clean products and saving potentials. The white paper
Saving costs with magnet separators
S+S whitepaper provides information about magnet technology especially for the chemical and pharmaceutical industries Schönberg, July 2013 S+S has prepared a white paper on the subject of "Reduced process costs in the chemical and pharmaceutical industries with magnet separators". This white paper describes the application possibilities and the function of magnet separators, and the advantages for the chemical and pharmaceutical industries, which essentially are clean products and saving potentials. The white paper
S+S metal separators aid increased efficiency in the plastics industry
Economically interesting, high-quality solutions for more than three decades Schönberg, February 2013 The European plastics industry is subject to considerable international competitive pressures. To maintain long term competitiveness companies must supply high-quality products and must operate at the highest possible efficiency throughout their operations. High levels of automation and minimum machine downtime are essential contributors to lower production costs and in-creased efficiency. “Metal Free” feedstock granulate, whether virgin or regrind is an

All 5 Releases


More Releases for VARICON

Impact of COVID-19 on Pneumatic Metering Pumps Market Analysis, Size, Share, Gro …
The Global Pneumatic Metering Pumps market report focuses on the economic developments and consumer spending trends across different countries for the forecast period 2020 to 2026. The research further reveals which countries and regions will have a better standing in the years to come. Apart from this, the study talks about the growth rate, market share as well as the recent developments in the Global Pneumatic Metering Pumps industry worldwide.
Odorizing Systems Market Size, Share, Development by 2023
Global Info Research offers a latest published report on Odorizing Systems Market Analysis and Forecast 2019-2025 delivering key insights and providing a competitive advantage to clients through a detailed report. The report contains 102 pages which highly exhibit on current market analysis scenario, upcoming as well as future opportunities, revenue growth, pricing and profitability. Click to view the full report TOC, figure and tables: https://www.globalinforesearch.com/global-odorizing-systems-market_p106857.html   Odorizing Systems are used for odorizing colorless and
2019 – 2025 Disc Type Capacitors Market Sharing with Major Leading Industries …
Up Market Research recently introduced new title on “2019 - 2025 Global Disc Type Capacitors Market Report” that provides an in-depth overview of industry and competitive landscape, covering multiple market segments and elaborates market outlook and status to 2025. Request Sample Copy Of this Report @ https://www.upmarketresearch.com/home/requested_sample/76908 Disc Type Capacitors Market research report delivers a close watch on leading competitors with strategic analysis, micro and macro market trend and scenarios, pricing analysis
Global Pneumatic Metering Pumps Market Major Players Analysis 2019-2025: Promine …
Global Pneumatic Metering Pumps market report is first of its kind research report that covers the overview, summary, market dynamics, competitive analysis, and leading player’s various strategies to sustain in the global market. This report covers five top regions of the globe and countries within, which shows the status of regional development, consisting of market value, volume, size, and price data. Apart from this, the report also covers detail information
Global Disc Type Capacitors Market Size By 2025 | Disc Type Capacitors Manufactu …
Market Research Hub (MRH) has actively included a new research study titled “Global Disc Type Capacitors Market Insights, Forecast to 2025” to its wide online repository. The concerned market is discoursed based on a variety of market influential factors such as drivers, opportunities and restraints. This study tends to inform the readers about the current as well as future market scenarios extending up to the period until 2025. In addition,
Vacuum Controller Market to Witness Robust Expansion by 2023
New report published by Global Info Research which offers insights on the global Vacuum Controller market. Universal vacuum controller for a two-point calibration of multiple vacuum sources. It comes with a chemo resistant ceramic pressure sensor. Click to view the full report TOC, figure and tables: https://www.globalinforesearch.com/global-vacuum-controller-market_p87249.html Global Vacuum Controller Market: Forecast by Type / Application / Region The worldwide market for Vacuum Controller is expected to grow at a CAGR