openPR Logo
Press release

Adam Hall presents 5 brandnew PALMER Audio Products

07-31-2007 10:12 PM CET | Leisure, Entertainment, Miscellaneous

Press release from: Adam Hall GmbH

Handmade premium quality from Germany.

PRM-SIGMA 8.2

A line level mixing desk that satisfies the highest professional standards. Two different modes of operation are possible: dual or mono. In dual mode, a total of four stereo sources can be mixed down to one stereo output; in mono mode there are eight inputs available, which can be mixed down to two outputs. All inputs and outputs are balanced with high-quality transformers and designed for professional line levels. The input gain is adjustable up to a maximum of 30 dB. An LED for each channel indicates when the working level of +6 dBu has been reached. The output gain is also adjustable and delivers an additional boost of 20 dB max., for a total possible amplification of 50 dB through the PRM-SIGMA 8.2. A five-point LED strip provides reliable optical monitoring of output signal strength. All inputs and outputs are equipped with a ground-lift switch. Additionally, it is possible to isolate the case from the electronics ground.

_______

PRM-SIGMA 4.2

The PRM-SIGMA 4.2 permits lossless mixdown of the (master) outputs from two mixing desks, the levels of which can be adjusted within a wide range, to (for example) a PA system. This is a requirement that is frequently encountered in discos when DJs and live bands appear in alternation and both use different mixing desks in conjunction with the house system. The advantages are readily apparent. For one thing, the DJ and his mixing desk are no longer dependent on the main desk. For another, loss of sound quality due to feeding the signal from one mixing desk into the other is avoided. As detailed below, the PRM-SIGMA 4.2 is also equipped with a few additional useful functions that you have surely always missed in "normal" line mixing desks.
Two stereo outputs are available. Besides the balanced professional XLR inputs, Channel A is also equipped with balanced jack inputs; if mono jack plugs (TS plugs) are used, the input automatically becomes unbalanced. Additionally, there are two cinch (RCA) inputs on the front. By virtue of the use of high-quality stereo ground-loop isolators, the inputs are always galvanically isolated: ground loops are ruled out. The levels are individually adjustable L/R. A switch with an LED indicator makes it possible to mute the channel. Using a monitor switch, it is possible to monitor the channel. Channel B is identically equipped, with the exception that only XLR inputs are available here. The maximum channel amplification is 30 dB. This makes it possible to give more than enough boost even to weak mixing desk output signals. The output section contains a five element LED display for L/R each, a headphone amplifier with volume control and two unbalanced cinch (RCA) outputs that permit recording of the sum signal. The master outputs are transformer-balanced XLR sockets. The nominal output level can be toggled between +6 dBu and –20 dBu. Except for the recording outputs, all inputs and outputs are equipped with ground-lift switches. Additionally, it is possible to isolate the case from the electronics ground.

_______

PRM-PHOENIX

In the installation sector, classic XLR-plug connectors are frequently impractical because for one thing they have to be soldered on site and for another they also require substantial space in the depth dimension. Thus the connectors know in technical jargon as Phoenix clamps are encountered much more often. The connection is pluggable on the one hand and the connections are screwed and not soldered. With the PRM-PHOENIX, Palmer is providing a 19” 1U unit that is equipped with various high-quality transformers and solves ground loops and signal splitting problems.
LINE-ISOLATING: A maximum of eight channels can be implemented. The transformers are medium impedance types with 10 kΩ impedance for inputs or 600 Ω types for outputs. A 4/4 implementation is also possible.
LINE-SPLIT: Up to four channels can be implemented with the following features: Input, parallel output (THRU), and two transformer balanced and galvanically isolated outputs.
MIC SPLIT: same features as LINE SPLIT, but transformers optimized for MIC level and impedance. Moreover, a resistance matrix for signal decoupling is included.
Housing 19”, 1U, depth 240 mm including tension relief clamp for cables.

_______

PRM-Delta 8.2

A distribution amplifier is used to distribute a signal source to multiple outputs. The PRM-Delta 8.2 is a two-channel (stereo) distribution amplifier and can distribute two different sources to four outputs each. A mono switch, however, also makes it possible to mix two sources with one another and then distribute the sum signal to eight outputs. The PRM-Delta is designed to be extremely flexible. The unit is capable of processing all signals from microphone level up to a professional line level of +20 dBu. Besides toggling between microphone and line levels, the levels at both inputs and outputs can be adjusted individually and continuously using potentiometers. A level meter with 5 LEDs per channel provides a reliable means of visual monitoring.
When distributing signals, the devices are frequently located in different rooms and thus they are usually also powered by different power supply systems. This provokes ground loops and the annoying buzzing sound associated with them. This will not happen with a PRM-Delta 8.2; the line inputs and all outputs are balanced by high-quality transformers and thus galvanically isolated. Additionally, it is possible to isolate the case from the electronics ground.

_______

PLI-DIN
audio isolating transformer

The PLI-DIN audio isolating transformers were developed with the special requirements of the installation market in mind. Two high-quality transformers are housed in a standard 70 mm top hat rail case. The connections are made using so-called Phoenix clamps.
There are two different versions of the PLI-DIN: LO-Z with a nominal impedance of 600 Ω : 600 Ω is optimized for balancing and galvanic isolation of outputs, while HI-Z with 10 kΩ : 10 kΩ is suitable for adapting line inputs.

Distribution over Adam Hall GmbH Germany.
Check www.adamhall.com

Adam Hall GmbH
Alexander Pietschmann
Rudolf-Diesel-Straße 5
D-61267 Neu-Anspach

- Germany -

Fon: (+49) 6081 / 94 19 0
Fax: (+49) 6081 / 4 32 80
Skype: AdamHallGmbH
E-mail: alexanderpietschmann@adamhall.com
Web: www.adamhall.com

Adam Hall is one of the worlds leading manufacturers of flight case hardware & fittings. Additionally Adam Hall distributes a wide range of brand name products into the professional audio industry.

Eminence and BMS Speakers, Defender Cable Crossovers, SKB Cases, Palmer Audio Tools and the Audio brand LD Systems are just some examples of the wide range.

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Adam Hall presents 5 brandnew PALMER Audio Products here

News-ID: 25018 • Views: 2251

More Releases from Adam Hall GmbH

Adaptik Corporation Featured in Novarica's Market Navigator: US Property/Casualt …
BETHLEHEM, PA – Adaptik Corporation, the creators of PolicyWriter, today announced that they were profiled in the July 2009 Novarica Market NavigatorTM Report for property and casualty insurers. As the report states; Novarica's Market NavigatorTM for property and casualty insurance "provides an overview of established policy administration systems and suites for US property/casualty insurers. The report contains profiles of each of 47 vendor solutions, containing information about the vendor organization, client

More Releases for LED

LED Supply Chain
This report covers market size and forecasts of LED Supply Chain, including the following market information: Global LED Supply Chain Market Size, 2019-2021, and 2020 (quarterly data), (US$ Million) Global LED Supply Chain Market Size by Type and by Application, 2019-2021, and 2020 (quarterly data), (US$ Million) Global LED Supply Chain Market Size by Region (and Key Countries), 2019-2021, and 2020 (quarterly data), (US$ Million) Global LED Supply Chain Market Size by Company, 2019-
Global LED Packaging Market Size Detail Analysis focusing Market Segmentation li …
Global LED Packaging Market Size Detail Analysis focusing Market Segmentation like Lamp-LED, Side-LED, TOP-LED, High-Power LED, SMD-LED, and Flip-Chip LED & more The LED market is one of the quickly growing segments as they are replacing the traditional lighting equipment like bulbs due to their high efficiency and power saving capability. The LED packaging industry is also growing with innovations along with the LED industry as new technologies are being included
Global LED Driver (LED Lighting Driver) Market Research Report
This report studies the global LED Driver (LED Lighting Driver) market status and forecast, categorizes the global LED Driver (LED Lighting Driver) market size (value & volume) by manufacturers, type, application, and region. This report focuses on the top manufacturers in United States, Europe, China, Japan, South Korea and Taiwan and other regions. Get sample copy of the report: https://www.marketdensity.com/contact?ref=Sample&reportid=68754 Table of Contents: Table of Contents Global LED Driver (LED Lighting Driver) Market Research Report
Global LED Packaging Market
Global LED Packaging Market is expected to reach US$ 34.29 Bn by 2026 from US$ 18.2 Bn in 2016 at a CAGR of 6.54%. The factors such as increasing demand for high power grade LED packages for lighting applications, rising demand for LED packages in the display panel market, growing government initiatives and regulations for adoption of energy-efficient LED lighting and increasing demand for smart LED lighting solutions are responsible
LED Lighting Optics Market
“Global LED Lighting Optics Market Insights, Forecast to 2025” This report researches the worldwide LED Lighting Optics Market size (value, capacity, production and consumption) in key regions like North America, Europe, Asia Pacific (China, Japan) and other regions. The report provides a unique tool for evaluating the Market, highlighting opportunities, and supporting strategies. This report recognizes that in this rapidly-evolving and competitive environment, up-to-date Marketing information is essential to monitor
LED Flashlight Market 2017 - SureFire, LED Lenser, Pelican, NovaTac
Apex Research, recently published a detailed market research study focused on the "LED Flashlight Market" across the global, regional and country level. The report provides 360° analysis of "LED Flashlight Market" from view of manufacturers, regions, product types and end industries. The research report analyses and provides the historical data along with current performance of the global LED Flashlight industry, and estimates the future trend of LED Flashlight market on