openPR Logo
Press release

SABIC Makes a Splash at Fakuma with New NORYL™ Resin, Meeting Tightening Global Regulations for Materials in Potable Water Systems

10-23-2012 08:19 PM CET | Industry, Real Estate & Construction

Press release from: SABIC Innovative Plastics

/ PR Agency: Marketing Solutions
SABIC’s New NORYL™ Resin can be Used for Potable Water Systems, Meeting Current and Upcoming Global Sustainability Regulations

SABIC’s New NORYL™ Resin can be Used for Potable Water Systems, Meeting Current and Upcoming Global Sustainability Regulations

Here at the Fakuma trade fair, booth #B5-5506, SABIC’s Innovative Plastics business today announced a new NORYL™ resin that not only complies with current European and global sustainability regulations governing materials used in potable water systems, but also with new, tougher regulations slated to go into effect in 2016. Developed at SABIC’s Fluid Engineering Center of Excellence in the Netherlands, NORYL FE1630PW resin is a 30-percent glass-reinforced polyphenylene ether (PPE) that offers excellent hydrological performance in both cold and hot water systems. The next-generation resin also meets tightening global specifications regarding compliance of glass fiber and sizing with U.S. and European food contact requirements. This PPE technology advancement further demonstrates SABIC’s proactive efforts to provide the fluid engineering industry with higher-performing, compliant materials that lead regulatory changes.

“Our new NORYL resin solution is part of SABIC’s global sustainability strategy to create new technologies that help our customers conserve natural resources, such as drinking water,” said Ilknur Gur, general manager, Specialty Portfolio in Europe, Innovative Plastics. “Improving the performance and lifespan of water carrier systems can make an important contribution to human health while supporting global industry demand for high-end, environmentally responsible thermoplastics. The launch of our new NORYL resin also showcases how our Fluid Engineering Center of Excellence and our world-class experts continue to break new ground in materials science, including state-of-the-art testing, to enable SABIC to meet the current and future needs of our customers.”

Going Above Today’s Standards

Plastics regulated under the major European and global directives for potable water systems already must comply with the food contact requirements of Food Contact Europe (FCEU) and the U.S. Food and Drug Administration (FDA). In 2016, these rules will be expanded to include glass fiber and sizing. Glass-reinforced NORYL FE1630PW resin has been rigorously tested and shown to meet these upcoming standards, as well as Germany’s KTW regulation, the European and UK Water Regulations Advisory Board (WRAS), France’s Attestation de Conformite Sanitaire (ACS) and the global NSF/ANSI Standard 61.


NORYL FE1630PW resin delivers long-term water resistance under conditions of fluctuating temperature (up to 85°C) and pressure, including water hammer. Its performance has been substantiated with data from SABIC’s Fluid Engineering Center of Excellence Laboratory, which is available upon request. The material also provides excellent processing characteristics including good stability and low reject rates.

Applications for NORYL FE1630PW include hydroblocks for boilers used for heating and drinking water, faucet cartridges and shower head water guide parts.

The new material is available globally.

Notes to Editors

• Brands marked with ™ are trademarks of SABIC
• SABIC is a registered trademark of SABIC Holding Europe B.V.
• High-resolution photos are available upon request
• SABIC should be written in every instance in all uppercase.

About SABIC

Saudi Basic Industries Corporation (SABIC) ranks among the world’s top petrochemical companies. The company is among the world’s market leaders in the production of polyethylene, polypropylene and other advanced thermoplastics, glycols, methanol and fertilizers.

SABIC recorded a net profit of SR 29.24 billion (US$ 7.80 billion) in 2011. Sales revenues for 2011 totaled SR 189.90 billion (US$ 50.64 billion). Total assets stood at SR 332.78 billion (US$ 88.74 billion) at the end of 2011.

SABIC’s businesses are grouped into Chemicals, Polymers, Performance Chemicals, Fertilizers, Metals and Innovative Plastics. SABIC has significant research resources with 16 dedicated Technology & Innovation facilities in Saudi Arabia, the USA, the Netherlands, Spain, Japan, India and South Korea. The company operates in more than 40 countries across the world with around 40,000 employees worldwide.

SABIC manufactures on a global scale in Saudi Arabia, the Americas, Europe and Asia Pacific.

Headquartered in Riyadh, SABIC was founded in 1976 when the Saudi Arabian Government decided to use the hydrocarbon gases associated with its oil production as the principal feedstock for production of chemicals, polymers and fertilizers. The Saudi Arabian Government owns 70 percent of SABIC shares with the remaining 30 percent held by private investors in Saudi Arabia and other Gulf Cooperation Council countries.

About Innovative Plastics

SABIC’s Innovative Plastics business is a leading, global supplier of engineering thermoplastics with an 80-year history of breakthrough solutions that solve its customers’ most pressing challenges. Today, Innovative Plastics is a multi-billion-dollar company with operations in more than 35 countries and approximately 9,000 employees worldwide. The company continues to lead the plastics industry with customer collaboration and continued investments in new polymer technologies, global application development, process technologies, and environmentally responsible solutions that serve diverse markets such as automotive, electronics, building & construction, transportation, and healthcare. The company’s extensive product portfolio includes thermoplastic resins, coatings, specialty compounds, film, and sheet. Innovative Plastics (www.sabic-ip.com) is a wholly owned subsidiary of Saudi Basic Industries Corporation (SABIC).

Marketing Solutions
Eefje Buys
Box 6
2950
Kapellen
Belgium
0031164317037

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release SABIC Makes a Splash at Fakuma with New NORYL™ Resin, Meeting Tightening Global Regulations for Materials in Potable Water Systems here

News-ID: 240127 • Views: 5053

More Releases from SABIC Innovative Plastics

SABIC Launches Portfolio of Antimicrobial Compounds at MD&M West to Help Custome …
According to a 2011 report by the World Health Organization, in 2002 in the United States alone approximately 99,000 deaths were linked to healthcare associated infections (HCAIs).1 Here at MD&M West (booth #1701), SABIC’s Innovative Plastics business today introduced powerful new tools to help medical device manufacturers reduce HCAIs among patients and clinicians. SABIC’s nine new antimicrobial compounds featuring silver technology have been tested for log reduction values – the
SABIC’s 3D-Formed LEXAN™ Sheet Increases Visibility, Safety, Comfort and Per …
Operators of logging equipment require exceptional visibility and protection against debris or large objects that may enter their cabin and cause serious injury in forest environments, such as tree limbs and other machinery parts. So when Rottne Industry AB needed a high-performance glazing material for the windshields and windows of its harvesters and forwarders, it turned to SABIC’s Innovative Plastics business for support. Working with SABIC and its distributer, Vink
Mitsubishi Motors Corporation Selects SABIC NORYL GTX™ Resin for 2013 Outlande …
SABIC’s Innovative Plastics business today announced that Mitsubishi Motors Corporation (MMC) has chosen SABIC’s next-generation NORYL GTX™ 989 resin for the front fenders of its 2013 Outlander Sport crossover. The vehicle’s fenders are the first to be produced using 2-cavity injection molding with NORYL GTX resin, allowing MMC to cut cycle times in half and reduce tooling costs. Other major benefits of the SABIC material include weight savings vs. steel
SABIC Announces Portfolio Expansion with Launch of Three New Engineered LEXAN™ …
SABIC’s Innovative Plastics business announced a major expansion of its industry leading LEXAN™ polycarbonate (PC) portfolio: three new engineered LEXAN PC film grades to help customers in the consumer electronics and automotive sectors meet growing demand for cost reduction, greater design flexibility, higher performance and compliance with global environmental regulations. The new grades – LEXAN HP92TTY, LEXAN 6060 and LEXAN OQ8DA films – provide outstanding optical quality and specialized functionality

All 5 Releases


More Releases for SABIC’s

MAGNUM LAUNCHES NEW TUBS MADE USING CERTIFIED CIRCULAR POLYPROPYLENE FROM SABIC …
SITTARD, THE NETHERLANDS, August 13, 2020 - Magnum, the world’s favorite ice cream brand, has today announced the roll out of more than 7 million ice cream tubs made with certified circular polypropylene from SABIC’s TRUCIRCLE™ initiative that uses feedstock made from recycling used, mixed plastic. The launch represented the “world’s first” tub within the ice cream industry that contains recycled plastic and that aims to contribute towards the challenge
LARGEST-EVER REAR QUARTER WINDOW IN SABIC’S LEXAN™ RESIN DEBUTS ON BUICK’S …
SAIC General Motors (SGM) has launched in China its new-generation Buick GL8 and GL8 Avenir luxury multi-purpose vehicles (MPVs), which sport the world’s largest polycarbonate (PC) rear quarter window, molded from SABIC’s LEXAN™ resin. SGM is offering five trim levels of the popular GL8 model, which has been a mainstay of the Chinese market since 2000 with more than 700,000 sold. The new rear quarter window is 40 percent (3kg) lighter
SABIC’S DEDICATED LDPE FOAM GRADES FOR MEAF AND ASIA
Polymeric foams are widely used in numerous areas that encompass building & construction, automotive, packaging, sports & leisure, and more. Enhanced physical properties and excellent foamability of the polymers are key in enabling more efficient material usage and energy savings. At the beginning of 2016, during the Chinaplas event, SABIC announced the launch of two new dedicated foam grades, SABIC® LDPE HP2024JDF and HP2024NDF, for Middle East, African, and Asian
Healthcare market to profit from SABIC’s extended plastics portfolio, unveiled …
SABIC is coming to Pharmapack Europe 2014 (Paris, February 12-13) to demonstrate its intent to further expand into the healthcare market. On Stand 354, SABIC will introduce two new pharmaceutical grades of polypropylene intended for syringes, other medical dosing application devices and also for packaging for healthcare applications. The two grades, SABIC® PP PCGR40 and a lubricated variant, SABIC® PP PCGR40L, are high-flow random copolymers typically used for producing thin-walled
Healthcare market to benefit from SABIC’s broad plastics portfolio, headlined …
One of the broadest portfolios of plastic medical products specifically developed to address the demanding needs of the healthcare industry can be seen on the SABIC stand (123) at Pharmapack Europe 2013. The portfolio spans a wide range of dedicated Polypropylene (PP) and Polyethylene (PE) products - recognized under the SABIC® PCG trademark - and diverse range of highly engineered and high performance resin products such as high purity LEXAN™
SABIC’s commitment to sustainability reflected at Doha expo, led by CEO
The Saudi Basic Industries Corporation (SABIC) is participating in the Qatar Sustainability Expo, which coincides with the United Nations Framework Convention on Climate Change (UNFCCC), in Doha from November 26 to December 7. Abdullah bin Hamad Al-Attiyah, President of COP18/CMP8, visited the SABIC stand during the inaugural ceremonies. He was accompanied by Dr. Mohammed bin Saleh Al-Sada, Minister of Energy and Industry, and Christiana Figueres, UNFCCC Executive Secretary. They were received