openPR Logo
Press release

Medium Density Polyethylene (MDPE) Market - Global Industry Analysis, Size, Share, Growth, Trends, and Forecast, 2020–2030

Medium Density Polyethylene (MDPE): Introduction
• MDPE is a thermoplastic within the polyethylene family, with a density of 0.926–0.940 g/cm3, which is less dense than the more common HDPE
• It can be produced by chromium/silica catalysts, Ziegler-Natta catalysts, or metallocene catalysts. MDPE has good shock and drop resistance properties. It is also less notch sensitive than HDPE. Stress cracking resistance is better than HDPE. MDPE is typically used in gas pipes & fittings, sacks, shrink film, packaging film, carrier bags, and screw closures. It has good heat deformation properties. Its melt temperature is above 120°C.
• MDPE has good abrasion resistance, low water permeability, and low coefficient of friction. It is well suited for insulation and cable jacketing of power cables. It can resist severe laying condition.

Request for sample-
https://www.transparencymarketresearch.com/sample/sample.php?flag=S&rep_id=80005

Rise in Building & Construction Activities to Drive Global Medium Density Polyethylene (MDPE) Market
• MDPE is primarily used in pipes and fittings. MDPE plastic pipes are used for gas pipes, water & wastewater plumbing designs, sewage, and drainage, steel pipe coating, wiring & cables, shrink films, and others.
• Medium density polyethylene (MDPE) has applications in automobile industries, where its high impact resistant properties, toughness, density, and moisture & chemical resistance are adopted in car designs
• MDPE is used for building car bodies, fuel tanks, and as an electrical insulator (sub-conductor insulators and cable jacketing). It is also cheap and easy to recycle. MDPE is technically termed ‘high-performance plastic’ alongside other classes of plastics.
• In agriculture, polyethylene is widely used in plasticulture, where plastic is used for some agricultural operations, and manufacture of some farm inputs such as silage bags, nursery pots, irrigation tubes, fumigation film, and other plastic soil and plant coverings.

Request for covid19 impact analysis –
https://www.transparencymarketresearch.com/sample/sample.php?flag=covid19&rep_id=80005

Applications of Medium Density Polyethylene (MDPE)
• In terms of application, the medium density polyethylene (MDPE) segment can be classified into agricultural, automotive, construction, consumer goods, medical & health, packaging, and industrial
• MDPE is primarily used in gas pipes & fittings, bags, shrink films, packaging films, transport bags, and bottle blowing
• Medium-density polyethylene (MDPE) resins are suitable for a number of packaging applications such as tubes, stand-up pouches, over-wrap films, milk pouches, and lamination films where stiffness and toughness are essential
• These resins offer higher stiffness, dart impact strength, and tear strength. These also present excellent optics for printing, see-through windows, and overall shelf appeal for retail packaging.
COVID-19 Impact on Global MDPE Market
• The global coronavirus outbreak is expected to pose severe challenges to the global MDPE market. MDPE is primarily used in the manufacture of pipes & fittings. Therefore, contraction in the building and construction industry is likely to restrain the global MDPE market in the near future. Extension of the lockdown in various countries across the world has led to supply chain disruptions. This, in turn, is anticipated to restrain the market in the near future.

Pre-Book now-
https://www.transparencymarketresearch.com/checkout.php?rep_id=80005<ype=S

North America to Hold Major Share of Global Medium Density Polyethylene (MDPE) Market
• In terms of region, the global medium density polyethylene (MDPE) market can be divided into North America, Europe, Asia Pacific, Latin America, and Middle East & Africa
• In terms of value, Asia Pacific dominated the global medium density polyethylene (MDPE) market in 2019. This can be ascribed to growth of the construction sector in developing countries such China and India in the region.
• Europe is anticipated to present significant opportunities in the medium density polyethylene (MDPE) market due to the usage of MDPE resins in various end-use industries such automotive, building & construction, and pipes
• The medium density polyethylene (MDPE) market in Latin America and Middle East & Africa is projected to grow at a sluggish pace during the forecast period

Click here to Details of the Report-
https://www.transparencymarketresearch.com/medium-density-polyethylene-mdpe-market.html

Key Players Operating in Global Market
• The global medium density polyethylene (MDPE) market is fragmented, with players focusing on incorporating advanced technologies to gain higher share. These players offer a complete portfolio of products; and focus on different business strategies to strengthen their position.
Prominent players operating in the global medium density polyethylene (MDPE) market include:
• Chemieuro
• BLS Polymers Ltd.
• The Dow Chemical Company
• Polyexcel LLC
• Kasakrom Chemicals
• Excelsior Roto Moulding Ltd.
Global Medium Density Polyethylene (MDPE) Market: Research Scope
Global Medium Density Polyethylene (MDPE) Market, by Application
• Agricultural
• Automotive
• Construction
• Consumer Goods
• Medical & health
• Packaging
• Industrial
• Others

More Trending Report-
https://www.prnewswire.com/news-releases/chemical-companies-in-sulfamic-acid-market-aim-at-meeting-diverse-demands-of-end-use-industries-valuation-projected-to-rise-at-cagr-of-5-during-2020-2030-tmr-301248247.html

US Office Contact

90 State Street, Suite 700
Albany, NY 12207
Tel: +1-518-618-1030
USA - Canada Toll Free: 866-552-3453
Email: sales@transparencymarketresearch.com
Website: https://www.transparencymarketresearch.com

About Us

Transparency Market Research (TMR) is a market intelligence company, providing global business information reports and services. Our exclusive blend of quantitative forecasting and trends analysis provides forward-looking insight for thousands of decision makers. TMR’s experienced team of analysts, researchers, and consultants, use proprietary data sources and various tools and techniques to gather, and analyze information. Our business offerings represent the latest and the most reliable information indispensable for businesses to sustain a competitive edge.

Each TMR syndicated research report covers a different sector - such as pharmaceuticals, chemicals, energy, food & beverages, semiconductors, med-devices, consumer goods and technology. These reports provide in-depth analysis and deep segmentation to possible micro levels. With wider scope and stratified research methodology, TMR’s syndicated reports strive to provide clients to serve their overall research requirement.

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Medium Density Polyethylene (MDPE) Market - Global Industry Analysis, Size, Share, Growth, Trends, and Forecast, 2020–2030 here

News-ID: 2292111 • Views:

More Releases from Transparency Market Research

Global Solar Powered Agricultural Dryer Market to Exceed USD 2.4 Billion by 2031 - Transparency Market Research
Global Solar Powered Agricultural Dryer Market to Exceed USD 2.4 Billion by 2031 …
The global solar powered agricultural dryer market, valued at US$ 1.6 billion in 2022, is projected to grow at a CAGR of 5.8% from 2023 to 2031, reaching US$ 2.4 billion by the end of 2031. Rising investments in renewable energy, growing awareness of sustainable agricultural practices, and the rapid expansion of the agricultural sector driven by population growth are key factors fueling market growth. Uncover essential discoveries and trends from
Technetium-99m Market Forecast 2034: Rising Demand for Diagnostic Imaging and Radiopharmaceuticals to Propel Market Expansion | Transparency Market Research, Inc
Technetium-99m Market Forecast 2034: Rising Demand for Diagnostic Imaging and Ra …
The global Technetium‐99m Market was valued at US$ 6.0 Billion in 2023 and is projected to grow at a CAGR of 3.3% from 2024 to 2034, surpassing US$ 8.6 Billion by the end of the forecast period. Advancements in nuclear imaging infrastructure, government-backed healthcare initiatives, and an increasing demand for precise diagnostic procedures are fueling this growth. Discover essential conclusions and data from our Report in this sample - https://www.transparencymarketresearch.com/sample/sample.php?flag=S&rep_id=77100 Analysts' Viewpoint The Technetium‐99m
Equine Diagnostic Services Market Outlook 2030: From US$ 168 Million in 2019 to US$ 280 Million by 2030, Driven by Rising Equine Diseases and Diagnostic Advancements
Equine Diagnostic Services Market Outlook 2030: From US$ 168 Million in 2019 to …
The global Equine Diagnostic Services Market, valued at approximately US$ 168 million in 2019, is projected to expand at a compound annual growth rate (CAGR) of ~5% from 2020 to 2030, reaching around US$ 280 million by 2030. Equine diagnostic services, encompassing tests like genetic, infectious disease, and imaging diagnostics, are critical for managing horse health in veterinary hospitals, clinics, and mobile settings. The market is driven by increasing equine
Digital Printing Market to Reach USD 54.4 Billion by 2034, Growing at a CAGR of 6.1%
Digital Printing Market to Reach USD 54.4 Billion by 2034, Growing at a CAGR of …
The digital printing market is experiencing strong growth, driven by rapid technological advancements, rising demand for personalized and on-demand printing, and an increasing focus on sustainable solutions. Digital printing allows for the direct transfer of digital files onto a wide range of substrates, offering high-resolution output with greater speed and flexibility. Its adaptability has led to broad adoption across industries such as packaging, textiles, publishing, and advertising-sectors where customization, efficiency,

All 5 Releases


More Releases for MDPE

How to Setup a MDPE Pipes Manufacturing Plant
Setting up an MDPE pipes manufacturing facility necessitates a detailed market analysis alongside granular insights into various operational aspects, including unit processes, raw material procurement, utility provisions, infrastructure setup, machinery and technology specifications, workforce planning, logistics, and financial considerations. IMARC Group's report titled "MDPE pipes Manufacturing Plant Project Report 2025: Industry Trends, Plant Setup, Machinery, Raw Materials, Investment Opportunities, Cost and Revenue" offers a comprehensive guide for establishing a MDPE pipes
Medium Density Polyethylene (MDPE) Market Detailed Analysis and Forecast up to 2 …
The latest research study released by Transparency Market Research on "Medium Density Polyethylene (MDPE) Market Forecast to 2020-2030 ″ research provides accurate economic, global, and country-level predictions and analyses. It provides a comprehensive perspective of the competitive market as well as an in-depth supply chain analysis to assist businesses in identifying major changes in industry practices. The market report also examines the current state of the Medium Density Polyethylene (MDPE)
Incredible Growth of U.K. MDPE Pipe Market 2031 by Share, Size, Growth
The global MDPE Pipe Market for Water Supply market is estimated to attain a valuation of US$ 113.19 Mn by the end of 2031, states a study by Transparency Market Research (TMR). Besides, the report notes that the market is prognosticated to expand at a CAGR of 1.66% during the forecast period, 2021-2031. The key objective of the TMR report is to offer a complete assessment of the global market including
MDPE Films Market to Witness Comprehensive Growth by 2028
Advancement in packing is perceived highly over past few decades. Medium Density Polyethylene (MDPE) films is a plastic material which provides an excellent balance of stiffness and toughness with good shock and drop resistance. The remarkable properties of MDPE films include stress cracking resistance and scratch proof nature. MDPE films include many types of coating such as adhesive, silicone, print treatment for labels and printing which make the product more
MDPE Bottles Market: Competitive Dynamics & Global Outlook 2024
LP INFORMATION offers a latest published report on MDPE Bottles Market Analysis and Forecast 2019-2025 delivering key insights and providing a competitive advantage to clients through a detailed report. According to this study, over the next five years the MDPE Bottles market will register a xx% CAGR in terms of revenue, the global market size will reach US$ xx million by 2024, from US$ xx million in 2019. In particular,
MDPE Bottles Market Size, Share, Development by 2024
Global Info Research offers a latest published report on MDPE Bottles Market Analysis and Forecast 2019-2025 delivering key insights and providing a competitive advantage to clients through a detailed report. This report focuses on the key global MDPE Bottles players, to define, describe and analyze the value, market share, market competition landscape, SWOT analysis and development plans in next few years. To analyze the MDPE Bottles with respect to individual growth