openPR Logo
Press release


04-08-2021 08:38 AM CET | Sports

Press release from: Shenzhen ICAN Sports Co., Ltd

In April, ICAN launched a new ROAD BIKE FRAME with the most competitive price.
The latest carbon fiber road frame from ICAN represents the cutting edge in aero technology and design. The A22 Disc Road Frame has smooth wind-cheating lines. It is also optimized for 700c wheels and disc brakes plus electronic gear controls. This is a truly modern design, for 2021. Clearance is sufficient for 28mm tires. A stripped 54cm frame laid up in Toray T700 is a featherweight 1150 grams.

The A22 Disc Road Frame stands out with low “shot-in” seat stays and a top tube that slopes less than most other designs. Both of these elements assist a smoother air flow over the frame – like the curving seat tube, which shelters part of the rear wheel. Cables and hoses are run internally. Another detail of the aero design is ahead tube with a tear-drop cross-section.

Perhaps the customer may ask,:What type of bike handlebar should i use? The engineer is from ICAN Cycling. Ale said, "Even though This frame is compatible with multiple handlebars,we recommend using HBA22, which is available in three stem lengths and handlebar widths,to avoid inconvenience."

ICAN's Speed Balanced Geometry rules the dimensions of all five available sizes, for optimum road handling. Seat tubes range from 45cm to 57cm. Seat angle is 73.5º on the smallest size, and a 72º for tall riders – to bring them both “over their work”. The lively wheelbase on the smallest frame is 954cm, with 1003cm on the largest. But all sizes have close-coupled 405cm chain stays and a fork rake of 45mm. Speed Balanced Geometry dictates a head angle of 71º for the 45cm frame and a steep 75.5º for the 57cm type. The result is a handling bonus for the rider – a frame that gives a lively feel on the road – for a bike that responds instantly when a racer sprints.

As a modern road frame, the A22 accepts only state-of-the-art running gear. Bottom bracket is the tried and trusted BB86. Easily-fitted flat-mount 140mm disc brakes have been part of the design since it was on the drawing board. All frames take 12mm thru-axles – 100mm front and 142mm rear. As well as disc brakes, the A22 Road frame is optimized for a group set that shifts electronically.

The A22 Disc Road frame may be the new kid on the block in the year of its launch by ICAN, but the design is forward-looking. It has the potential to become a classic as the years go by – as a frame on its own and also as the heart of a highly competitive bike with disc brakes and the latest electronic group set.

In addition to the excellent performance of the A22, the most exciting thing is its price.

Compared with other brand frames with the same configuration on the market, such as fulcrum, etc., A22 can be described as a killer for cycling enthusiasts. The retail price of The A22 Disc Road Frame is only 630$.

The A22 Disc Road Frame is currently on sale on the ICAN official website, and the stock is limited.
Oficial website:

B6 Building,Yinlong Industrial Longdong Community LongGang District Shenzhen China 518116

About ICAN Cycling

Shenzhen ICAN Sports Co., Ltd, located in Shenzhen, is the best manufacturer for carbon wheelsets, carbon frames, and carbon bike parts, which is one of the most influential carbon bike manufacturers in China.

ICAN Sports Co., Ltd Found in 2009, more than 200 workers, producing about 1700 pcs carbon frames and 2000 pcs carbon wheelsets per month.

This release was published on openPR.

Permanent link to this press release:

Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release ICAN LAUNCHES A22 AERO ROAD BIKE FRAME here

News-ID: 2267044 • Views: 292

More Releases for A22

President of India visits CIGB today to reinforce bilateral trade and scientific …
Havana, June 22nd, 2018 - The 14th and current President of India, in office since July 25th 2017, Ram Nath Kovind (b. 1945) visited the Center for Genetic Engineering and Biotechnology (CIGB) in Havana, Cuba. President Ram Nath Kovind was received by the President of BioCubaFarma, Dr. Eduardo Martínez, and the General Director of the CIGB Dr. Eulogio Pimentel. This is a very important date in the agenda of Mr.
DESCAM joins the RosMould 2008 in Russia
ModelMaker D and LAMAS deliver best performance: Versatile applications and a gain for all industries. ModelMaker is a laser scanning system that has been introduced onto the market 14 years before. It is always in use on a coordinate measurement arm. Due to its hand-held laser scanning, ModelMaker captures a big variety of objects completely and without contact. The sensor is moved along the object being scanned and captures the surface. The