LEDtronics Latest Generation T8 Tube Lights Shine With or Without a Ballast
These Ballast-Bypass or Dual Mode Tubes are available with clear or frosted polycarbonate lens, and in options of 4000K, 5000K or 6000K white. They are ideal for such applications as office lighting, hallways, parking garage, parking structure lighting, production areas, warehouses, transportation, railroads, buses, coolers, freezers, vending machines, schools, retail store display lighting, under-cabinet or cabinet lights, light boxes, and signage backlighting.
Our T8KL1 Ballast Bypass series of new T8 LED tubes come in 2 to 6 foot lengths with directly powered G13 bases (2 pins at one or both ends), while the 5¹⁄₃ and 8 ft tubes have single-pin FA8 bases. They use up to only 8 to 36 watts, depending on length, and can replace equivalent fluorescent tubes 17 to 60 watts.
The Dual-mode (Type A+B) Ballast Ready/Ballast Bypass T8KL2 series of new T8 LED tubes are available in 3 and 4 ft lengths, all with a 2-pin G13 base. They consume only 10 to 18 watts, potentially replacing equivalent fluorescent tubes 25 to 32 watts.
In order to truly benefit from the full energy and cost savings, LEDtronics always recommends doing a simple, one-time ballast bypass when first replacing fluorescent tube lights with LED tube lights. However, we understand the need for Ballast-Ready products. With our Dual Mode tube lights, there is no need for a ballast bypass when installing. All it takes is an easy direct retrofit into an existing fluorescent T8 fixture with electronic ballast, and it is ready to go. In addition, when the ballasts eventually go out, they can then be bypassed — no need to purchase new ballasts.
Our T8KL1 and T8KL2 series LED Tube Lights have an excellent return on investment. They offer energy savings of up to 50 percent over fluorescent equivalents, and have lumen maintenance of over 70 percent at over 50,000 hours (well over five years), while conventional fluorescent lamps typically have an ideal-condition rated lab life in the range 8,000 to 24,000 hours.
Both ETL-listed/classified series operate on 100~277VAC, and are suitable for damp locations. They offer high-lumen illumination in beam angles around 120 degrees.
Constructed with an aluminum heatsink and a PC lens, the tubes have instant, full-strength light-up with no buzzing or flickering, and an even, directional distribution of light. Unlike fluorescents, they produce no UV radiation, no RF interference and minimal IR. Also, being RoHS compliant, they have no toxic mercury, and operate with a wide operating temperature range of ~-4°F to ~+131°F (-20°C to +55°C). Their solid-state construction renders them impervious to shock, vibration and frequent switching.
LEDtronics’ LED T8 Ballast-Ready/Ballast Bypass Tube Lights come with a 5-year U.S. factory warranty. Different color temperatures, tube lengths and voltages, as well as Made in USA ARRA compliance options are available for qualified volume offers. The series is available through LEDtronics distributors, and quantity discounts are available.
For more details and technical data, visit the product web pages:
23105 Kashiwa Court
Torrance, CA 90505
Since 1983, LEDtronics has been America’s Premium Brand LED Company. We are the pioneers of designing, manufacturing and packaging LED lighting products for hundreds of industries and thousands of customers, including 80 percent of Fortune 500 OEM companies and all the major national and regional US distributors.
LEDtronics is proud to have been manufacturing in the USA for over three decades now. The company is a qualified Government and Defense supplier (CAGE code 8Z410), and about 800 National Stock Numbers (NSN) have been assigned to our products over the years. All of our products come with an UNCONDITIONAL U.S. factory warranty.
This release was published on openPR.
Permanent link to this press release:
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release LEDtronics Latest Generation T8 Tube Lights Shine With or Without a Ballast here
News-ID: 2244331 • Views: 331
More Releases from LEDtronics
Vibrant LED Panel Lights Add Long Life and Energy Savings to Industrial Controls
LEDtronics answers the call for low-cost, long-lasting and reliable solutions to retrofit panel mount applications with their new PNL-1106 Series of LED Indicator Lamps. The LEDs eliminate many of the shortcomings of conventional incandescent lamps and shine even further beyond. Accommodating panels up to 0.3 inch (7.6mm) in thickness with an 11/16" (17.46mm) mounting hole, the bolt-in bulbs with a 17.5mm mounting diameter and 0.19" (4.75mm) wide spade tabs perfectly fit
New Generation of Slim LED Flood Lights Outshine Their Predecessors in Every Way
LEDtronics® announces its latest series of Slim LED Flood Lights that put out a surprising amount of light for their compact size and low power consumption. The high efficacy, multiple mounting options, and sleek design make the light fixtures an ideal and easy installation in various applications. The area lights are offered with a choice of angular adjustable brackets with multiple mounting options for various lighting situations indoors or outdoors, such
LEDtronics Next-Generation LED Cobrahead Luminaire for Efficient Roadway Illumin …
The new LEDtronics® LED street light fixture follows the traditional cobrahead design, but delivers an energy-efficient, high-lumen output with 146 lm per watt performance. The latest cobrahead series consumes minimal watts, but replaces metal-halide/HPS luminaires 150W up to 250 watts. The UL-listed LEDtronics luminaire is lightweight and easy to install, making it ideal for lighting roadways, highways and sidewalks in residential and commercial settings, as well as outdoor parking areas,
New LED Miniature Bulb Series Puts Out Ultra Bright, Omnidirectional Light as an …
LEDtronics continues to expand its line of industry-leading miniature based LED bulbs. Introducing the B305SM series, an omnidirectional miniature bulb that directly replaces incandescents in critical instrument status indication applications. They produce much brighter light intensity while remaining energy-efficient. Like the incandescent bulbs commonly used in panel mount applications, LEDtronics’ new ultra-bright LED lamp features a T3¼ (9mm) single-contact bayonet base that gives installation a familiar twist. It’s a fit
More Releases for LED
LED Supply Chain
This report covers market size and forecasts of LED Supply Chain, including the following market information: Global LED Supply Chain Market Size, 2019-2021, and 2020 (quarterly data), (US$ Million) Global LED Supply Chain Market Size by Type and by Application, 2019-2021, and 2020 (quarterly data), (US$ Million) Global LED Supply Chain Market Size by Region (and Key Countries), 2019-2021, and 2020 (quarterly data), (US$ Million) Global LED Supply Chain Market Size by Company, 2019-
Global LED Packaging Market Size Detail Analysis focusing Market Segmentation li …
Global LED Packaging Market Size Detail Analysis focusing Market Segmentation like Lamp-LED, Side-LED, TOP-LED, High-Power LED, SMD-LED, and Flip-Chip LED & more The LED market is one of the quickly growing segments as they are replacing the traditional lighting equipment like bulbs due to their high efficiency and power saving capability. The LED packaging industry is also growing with innovations along with the LED industry as new technologies are being included
Global LED Driver (LED Lighting Driver) Market Research Report
This report studies the global LED Driver (LED Lighting Driver) market status and forecast, categorizes the global LED Driver (LED Lighting Driver) market size (value & volume) by manufacturers, type, application, and region. This report focuses on the top manufacturers in United States, Europe, China, Japan, South Korea and Taiwan and other regions. Get sample copy of the report: https://www.marketdensity.com/contact?ref=Sample&reportid=68754 Table of Contents: Table of Contents Global LED Driver (LED Lighting Driver) Market Research Report
Global LED Packaging Market
Global LED Packaging Market is expected to reach US$ 34.29 Bn by 2026 from US$ 18.2 Bn in 2016 at a CAGR of 6.54%. The factors such as increasing demand for high power grade LED packages for lighting applications, rising demand for LED packages in the display panel market, growing government initiatives and regulations for adoption of energy-efficient LED lighting and increasing demand for smart LED lighting solutions are responsible
LED Lighting Optics Market
“Global LED Lighting Optics Market Insights, Forecast to 2025” This report researches the worldwide LED Lighting Optics Market size (value, capacity, production and consumption) in key regions like North America, Europe, Asia Pacific (China, Japan) and other regions. The report provides a unique tool for evaluating the Market, highlighting opportunities, and supporting strategies. This report recognizes that in this rapidly-evolving and competitive environment, up-to-date Marketing information is essential to monitor
LED Flashlight Market 2017 - SureFire, LED Lenser, Pelican, NovaTac
Apex Research, recently published a detailed market research study focused on the "LED Flashlight Market" across the global, regional and country level. The report provides 360° analysis of "LED Flashlight Market" from view of manufacturers, regions, product types and end industries. The research report analyses and provides the historical data along with current performance of the global LED Flashlight industry, and estimates the future trend of LED Flashlight market on