Laser sensor LLD from Waycon. Precise, robust and reflectorless

Measure distances with milimeter accuracy. Precisely define positions. Register movements.
The Laser sensor LLD with a measurement range of 0,1m - 100m, is an opto-electronic distance measuring module designed for industrial use. It works based on the phase comparison (amplitude modulation) principle. Measurement is performed with spot accuracy, because the laser beam features a divergence as small as 0.6 mrd.
The laser operates at a wavelength range of 650 nm (red) and can easily be directed onto a target surface. The laser qualifies for laser class 2 requirements under 2 DIN EN 60825-1:2001-11.
Measured values are output via RS 232 / 422 interface (switchable). Connection to an industrial bus is possible.

Applications for the Lasersensor are:
Monitoring of delivery systems and crane equipment, distance measurement, position measurement, fill-level measurement, security applications, elevator positioning and parts detection.

WayCon is a manufacturer of accurat measurement systems and professional sensors for industry and research. We are your contact for all applications in areas of position and distance measurement techniques, level measurements and angel measurements.
Configure your sensor individually?... then we recommend you contact us for special advise, before you start your application. In particular we can advise on which technology to use for cost effectiveness and desired accuracy.

Waycon Positionsmesstechnik GmbH
Mehlbeerenstr.4
82024 Taufkirchen
Germany
Fon: +49 (0) 89 / 67 97 13 - 0
Fax: +49 (0) 89 / 67 97 13 - 250
Marcus Venghaus
E-Mail: info@waycon.de
Internet: www.waycon.de/english.html

This release was published on openPR.