openPR Logo
Press release

Perle launches a 10-port PoE (100W) Gigabit Switch with Fiber or Copper uplink ports

09-23-2020 01:19 PM CET | IT, New Media & Software

Press release from: Perle Systems Inc.

The IDS-710HP is a fully compliant IEEE802.3bt PoE Industrial Managed Switch that supports all PD types, classes, and topologies in a compact DIN Rail chassis.



PRINCETON, N.J. (Sept. 22, 2020) Perle Systems, a global manufacturer of secure device networking hardware, today announced the launch of the IDS-710HP, a fully compliant IEEE802.3bt Power over Ethernet (PoE) Industrial Managed Switch. This 10-port Gigabit Switch comes with eight 100W PoE copper ports, with 450W of total available power, and two SFP Slots supporting 1G fiber, 2.5G fiber, or 10/100/1000Mbps copper.

“Using PoE technology increases installation flexibility, lowers costs, and makes networks more efficient by eliminating the need to install multiple pieces of equipment, additional electrical wires, or outlets.,” comments John Feeney, Chief Operating Officer at Perle Systems. “However, the need to connect power-hungry IoT devices, like pan-tilt-zoom (PTZ) security cameras with heaters, LED lighting in building management, and 802.11ax/ac wireless access points is driving a need for PoE Switches that support higher wattage levels and more types of PDs.”

In addition to transmitting network data, the IDS-710HP has a built-in PoE injector to supply up to 100W PoE per port for a total of 450W across all eight copper ports. Classified as Layer 2 Power Sourcing Equipment (PSE), the switch will detect if connected devices are PoE-compatible and will automatically supply power. The IDS-710HP will not need to be replaced as PDs are updated because, as a fully 803.2bt compliant switch, it supports all PD types, classes, and topologies:

Type 1, 2, 3, and 4

Class 1, 2, 3, 4, 5, 6, 7, and 8

Single-signature and Dual-Signature

The IDS-710HP also has the ability to reboot attached PDs remotely. A PD power reset from the IDS-710HP will save technicians a trip to the PD location, which may be in very difficult to access locations like exterior walls, ceilings, light posts, pipelines, and kiosks.

Perle IDS-710HP PoE Industrial Managed Switch come with a PRO Feature Set to meet the needs enterprise-grade level environments where additional security and network integration functionality is required:

PROFINET and Modbus TCP protocols are supported for monitoring and device management

Ring Protocol MRP (IEC 62439-2) ensures less than 10ms recovery time

STP/RSTP/MSTP provides network redundancy

Advanced Security and IT management features include TACACS+, RADIUS, 802.1x, SSH, SNMPv3, and HTTPS

IEEE 1588 V1 and V2 PTP provides a method for clock synchronization with microsecond accuracy

Advanced protocols that optimize the performance and intelligence of the network include IGMP Snooping, LLDP-MED, GVRP, Voice VLANs, MSTP, GMRP, and IPv6 MLD Snooping

These rugged fan-less switches feature a corrosion resistant IP20 aluminum case, a voltage range of 44 to 57 volts DC, and operate in temperatures from -40 to 70°C. 



### 

Perle Systems Inc.
116 Village Boulevard
Suite #200
Princeton, NJ 08540
Toll Free North America:
1 800-GO-PERLE (467-3753)

About Perle Systems: www.perle.com 

Founded in 1976, Perle Systems designs and manufactures highly reliable device networking, media conversion, and Internet of Things (IoT) connectivity hardware. With an extensive range of solutions, Perle products are ideal for organizations that need to establish network connectivity across multiple locations, securely transmit critical and sensitive information, or remotely monitor and control networked devices and appliances. Perle has offices in 9 countries and sells its products through a globally established distributor, system integrator, and reseller channel. 

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Perle launches a 10-port PoE (100W) Gigabit Switch with Fiber or Copper uplink ports here

News-ID: 2139700 • Views: 268

More Releases from Perle Systems Inc.

Perle launches FirstNet™ Ready LTE Routers
PRINCETON, N.J. (Aug. 17, 2021) Perle Systems, a global provider of advanced device networking hardware, today announced IRG5500+ FN LTE Routers that are certified for FirstNet’s 700MHz Band 14 spectrum. FirstNet was built with AT&T in a public-private partnership with the First Responder Network Authority (FirstNet Authority) to provide public safety agencies a technology upgrade for better access to critical information. Before being certified and approved for use on FirstNet,
Perle IRG5521 LTE Routers provide LTE coverage when WiFi is unavailable
When the power goes down, so does the WiFi. Cellular systems, however, keep working. A Case Study about Winning Strategies’ new stand-alone multi-power-source wireless surveillance system. PRINCETON, N.J. (Mar. 30, 2021) Establishing a contingency plan to recover IT services after an emergency, or system disruption, is a critical step in the network design process. IT systems are vulnerable to a variety of interruptions that range from short-term power outages to severe
Leonardo chooses Perle PoE Switches to power ALPR cameras
PRINCETON, N.J. (Feb. 11, 2021) Automatic License Plate Recognition (ALPR) systems are used to assist in law enforcement, toll collection, and traffic data analysis. By mounting cameras along highways, bridges, tunnels, and overpasses, vehicle speed and license plates can be captured to automatically identify suspect vehicles or validate vehicles on roadways as part of an HOV lane or tolling program. Also, the data can be used to analyze traffic statistics,
AcoustAlert integrates Perle Ethernet Extenders into Perimeter Detection System
PRINCETON, N.J. (Dec. 10, 2020) Keeping unauthorized intruders from entering a business location is a critical part of protecting corporate assets. In many cases, fencing or walls are adequate deterrents. Other times, more sophisticated intrusion detection systems, such as security cameras, thermal energy detectors, and sensor cables, are required. In these scenarios, the data recorded by these field devices need to be transmitted in real-time over a network to a

All 5 Releases


More Releases for PoE

Global Poe Injectors Industry Market Analysis & Forecast
Global Poe Injectors Industry Market Analysis & Forecast 2018-2023, the revenue is valued at USD XX million in 2017 and is expected to reach USD XX million by the end of 2023, growing at a CAGR of XX% between 2018 and 2023. The production is estimated at XX million in 2017 and is forecasted to reach XX million by the end of 2023, growing at a CAGR of XX% between
Global POE Switch Market Professional Survey Report
This report studies POE Switch in Global market, especially in North America, China, Europe, Southeast Asia, Japan and India, with production, revenue, consumption, import and export in these regions, from 2013 to 2018, and forecast to 2025. This report focuses on top manufacturers in global market, with production, price, revenue and market share for each manufacturer, covering Cisco Avaya HP Dell Brocade Alcatel-Lucent Netgear Juniper D-Link Extreme Adtran Alaxala Huawei
POE Industry Analysis by 2025:  QY Research
Global POE Market report is designed in a method that helps readers to acquire a complete knowledge about the overall market scenario for the projected period. This Market report consists of the brief profile of key players in the industry and their upcoming market plans and current developments during the forecasted period 2018 to 2025. The report of global POE market includes the competitive landscape section which provides the full
PoE Injector Market to Draw Mega Growth with Ballooning Application of PoE Techn …
The global power over ethernet (PoE) injector market is envisioned to garner a colossal growth from connectivity applications with the soaring usage of the PoE technology and solutions. The PoE technology could be used to power PoE compatible devices such as wireless access points and voice over internet protocol (VoIP) phones. Thus, with the growing usage of such devices, the demand for PoE injector is foretold to increase correspondingly. Wireless
Global Power Over Ethernet (POE) Controllers Market
Global Power Over Ethernet (POE) Controllers Market Research Report provides insights of the industry over past 5 years and a forecast until 2022. The Report studies, the Market status and future trend in the Global market, splits by type and by applications, to fully and deeply researched and reveal the market situation and future forecast. The Power Over Ethernet (POE) Controllers Market report would come in handy to understand your competitors
Perle Launches Fully Compliant PoE+ Injectors
NASHVILLE, TN—April 12th, 2016 — Perle Systems, a manufacturer of secure device networking hardware, today announced the launch of the PINJ30 Power over Ethernet (PoE) Injector. PoE Injectors are designed to add up to 30W power to Ethernet CAT5/6 cabling and provide electricity to connected devices such as wireless access points, pan-tilt-zoom (PTZ) cameras and video phones. Power over Ethernet Injectors enable increased flexibility for the location of installed equipment and