openPR Logo
Press release

Linear Technology| LT3512: No-Opto 100V Isolated Monolithic Flyback Regulator Operates over a -55°C to 150°C Junction Temperature Range

09-20-2011 08:09 AM CET | Industry, Real Estate & Construction

Press release from: Linear Technology

/ PR Agency: xmedia
100V Isolated Monolithic Flyback Regulator

100V Isolated Monolithic Flyback Regulator

MILPITAS, CA – September 15, 2011 – Linear Technology Corporation announces the new high reliability (MP-grade) version of the LT3512, a high voltage isolated monolithic flyback regulator that operates over a -55°C to 150°C junction temperature range. This device simplifies the design of an isolated DC/DC converter. The LT3512 requires no optocoupler, third winding or signal transformer for feedback, as the device’s output voltage is sensed from the primary-side flyback signal. The LT3512 operates over a 4.5V to 100V input voltage range, has a 420mA, 150V power switch and delivers up to 4.5 watts of output power, making it well suited for a wide variety of telecom, datacom, automotive, industrial and military applications.
The LT3512 operates in a boundary mode, current-mode control switching scheme, resulting in less than +/-5% regulation over the full line, load and temperature range. Boundary mode, also known as critical conduction mode (crcm), permits the use of a smaller transformer compared to equivalent continuous conduction mode designs. The output voltage is easily set by two external resistors and the transformer turns ratio. Several transformers identified in the data sheet can be used for numerous applications. The device’s high level of integration results in a simple, clean, tightly regulated application solution to the traditional challenge of isolated power delivery.
The LT3512MP is available in a small MSOP-16 package with 4 pins removed for additional high voltage pin spacing. For more information, visit www.linear.com/product/LT3512MP

Summary of Features: LT3512MP

• VIN Range from 4.5V to 100V
• Onboard 420mA, 150V Integrated Power Switch
• No Optocoupler, Transformer or Third Winding Required for Feedback
• Boundary-Mode Operation
• VOUT Set with Two External Resistors
• Off-the-Shelf Transformers
• Programmable Undervoltage Lockout
• Output Voltage Temperature Compensation
• -55°C to 150°C Operating Junction Temperature Range

Linear Technology Corporation, a member of the S&P 500, has been designing, manufacturing and marketing a broad line of high performance analog integrated circuits for major companies worldwide for three decades. The Company’s products provide an essential bridge between our analog world and the digital electronics in communications, networking, industrial, automotive, computer, medical, instrumentation, consumer, and military and aerospace systems. Linear Technology produces power management, data conversion, signal conditioning, RF and interface ICs, and µModule subsystems.

LT, LTC, LTM, µModule and are registered trademarks of Linear Technology Corp. All other trademarks are the property of their respective owners.

Linear Technology Corp.
Corporate Headquarters
1630 McCarthy Blvd.
Milpitas,CA 95035-7417

Ralf Stegmann
ralf@ezwire.com
Tel: +49 (0) 7131 9234–0

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Linear Technology| LT3512: No-Opto 100V Isolated Monolithic Flyback Regulator Operates over a -55°C to 150°C Junction Temperature Range here

News-ID: 192365 • Views:

More Releases from Linear Technology

Linear Technology | LTM8026: 36V, 5A µModule Regulator Protects Input Supplies
Linear Technology | LTM8026: 36V, 5A µModule Regulator Protects Input Supplies
36V, 5A µModule Regulator Protects Input Supplies from Overcurrent Conditions & Supports Asymmetric Power Sharing MILPITAS, CA – March 15, 2012 Linear Technology announces the LTM8026, a 36V input, 5A step-down µModule® regulator with an adjustable and precise (+/-10%) accurate current limit. The current limit enables designers to set the maximum amount of power drawn from the supply, preventing input voltage droop caused by overcurrent conditions. When multiple LTM8026 are configured
Linear Technology| LTC2881-82: Isolated RS485 & RS232 µModule Transceivers
Linear Technology| LTC2881-82: Isolated RS485 & RS232 µModule Transceivers
Isolated RS485 & RS232 µModule Transceivers Now Specified for -55°C to 105°C for Military & Automotive Applications MILPITAS, CA – March 26, 2012 – Linear Technology Corporation introduces automotive (H-grade) and high reliability military (MP-grade) versions of the LTM2881 and LTM2882, isolated µModule® transceivers which guard against large ground-to-ground differentials and common-mode transients in RS485 and RS232 networks. The LTM2881 single RS485 and LTM2882 dual RS232 transceivers break ground loops
Linear Technology | LTC5544: High Linearity Downconverting Mixer Covers 4-6GHz RF Frequency Range
Linear Technology | LTC5544: High Linearity Downconverting Mixer Covers 4-6GHz R …
MILPITAS, CA – March 28, 2012 – Linear Technology announces the LTC5544, a 4GHz to 6GHz high dynamic range downconverting mixer. The LTC5544 mixer offers high linearity with 25.9dBm IIP3 (Input Third-Order Intercept), high conversion gain of 7.4dB owing to its integrated IF amplifier, and a noise figure of 11.3dB. These performance characteristics enable excellent dynamic range performance for both main receivers and digital pre-distortion receivers. Moreover, the LTC5544’s RF
Linear Technology | LT3992: 60V Input, Dual 3A(IOUT), 2.25MHz Step-Down DC/DC Converter
Linear Technology | LT3992: 60V Input, Dual 3A(IOUT), 2.25MHz Step-Down DC/DC Co …
MILPITAS, CA – March 29, 2012 – Linear Technology Corporation announces the LT3992, a monolithic, dual output step-down switching regulator that delivers up to 3A of continuous output current from each channel. It operates from an input voltage range of 3V to 60V, ideal for applications requiring continuous output voltage regulation through load dump and cold-crank conditions found in automotive applications. Independent input, shutdown, feedback, soft-start, current limit and comparator

All 4 Releases