When performance matters: The new flexible 40 mm EC motor from Bühler Motor
The electronic commutation stands for long life and low radio interference. The 8-pole rotor with plas-tic-bonded NdFeB magnets makes a decisive contribution to its striking dynamics. Segmented stators allow for a maximum copper fill and thus for convincing top performance. Precision ball bearings ensure smooth running and an operating life of at least 20,000 hours. Three Hall sensors signal the precise position of the rotor.
But the new 40 mm motor would not be a typical Bühler drive if it did not also set the standards in terms of flexibility and adaptability. By changing the wire diameter and the number of stator turns, a large range of rotational speeds can be covered in the range between 6 and 48V. Additionally, there is a large range of possible shaft designs, including flats, threads, cross bores etc. Moreover, drive elements such as pinions, pulleys, and worm gears can be attached to the motor shaft without any problem. Both block-, sinus- and vector commutation as well as excellent characteristics for operation without sensors is possible. Exact controllability and software integration without problem are further features of the new brushless motors.
Top performance with little required space combined with maximum dynamics: These are reasons why 15 of these motors are currently used in an innovative cash handling system. This system, which can be positioned directly under the workplace of the cashier, ensures automatic handling of deposits and paybacks. It counts and sorts the bank notes and draws up the account at the end of the day – in fact a responsible task for the new Bühler EC motors which implies one hundred per cent reliability.
About Bühler Motor
Bühler Motor delivers demanding, custom-made, and reliable drive solutions with DC/BLDC small motors and gear motors.
More than one of out every ten employees at Bühler Motor works in Research and Development. Our in-house sample shop and R&D department, combined with state-of-the-art test labs, enable Bühler to concentrate completely on quick and flexible development of customer specific drive solutions.
With the enthusiasm typical for Bühler, 1600 employees ensure successful industrialization and production of mechatronic drive solutions for mid- to high volume applications.
With eight locations on three continents and highly developed process competencies, Bühler Motor is able to fulfill all customer requirements for short transit times, quality, and on-time delivery at the required volumes. The company’s strategic markets include the automotive market, the healthcare equipment market, general industrial solutions, for example building automation, and aviation applications.
Bühler Motor GmbH
Phone: +49 911 45 04-1129
Fax: +49 911 43 08 69-1129
This release was published on openPR.
Permanent link to this press release:
You can edit or delete your press release When performance matters: The new flexible 40 mm EC motor from Bühler Motor here
News-ID: 189880 • Views: 2096
More Releases from Bühler Motor
Buehler Motor Recognized by General Motors as a 2019 Supplier of the Year Winner
Nuremberg, July 8, 2020 – Buehler Motor was named a GM Supplier of the Year by General Motors during a virtual ceremony honoring the recipients of the company’s 28th annual Supplier of the Year awards on Wednesday, June 24, 2020. During the event, GM recognized 116 of its best suppliers from 15 countries that have consistently exceeded GM’s expectations, created outstanding value or introduced innovations to the company. The awards
Bühler Motor strengthens its management
With his experience in the areas of automotive, industry, drive technology and fluid management, Achim Brömmel, as the new Vice President for Program Management Automotive & Industrial Drive Solutions, fits perfectly to Bühler Motor Nuremberg, October 7, 2019 – On October 1, Achim Brömmel took over responsibility for Program Management for Automotive & Industrial Drive Solutions of the Bühler Motor Group. In this position, he follows Mark Furtwängler, who up to
Bühler Motor Recognized by General Motors as a 2018 Supplier of the Year Winner
Nuremberg, Jube 4, 2019 – Bühler Motor was named a GM Supplier of the Year by General Motors during its 27th annual Supplier of the Year awards ceremony held Wednesday, May 15 in Detroit, MI. Mark Furtwängler (Owner & Co-CEO) and Karl Wagner (President & General Manager Buehler Motor, Inc.) personally accepted the award. During the event, GM recognized 133 of its best suppliers from 15 countries that have consistently exceeded
New Generation in the management of Bühler Motor
Kerstin Jung, new Vice President HR and Michael Eckert, new Vice President Operations Nuremberg, May 16, 2019 – Kerstin Jung has taken on overall responsibility for HR subjects at the Bühler Motor Group as Vice President Human Resources as from March 1. She follows Matthias Otto, who has decisively shaped the department over the last 12 years and significantly pushed ahead internationalization. Matthias Otto entered well-earned retirement on December 31 last
More Releases for Drive
Global Harmonic Drive Market 2018 - BENRUN Robot, Nidec-Shimpo, China Harmonic D …
Apex Market Reports, recently published a detailed market research study focused on the “Harmonic Drive Market” across the global, regional and country level. The report provides 360° analysis of “Harmonic Drive Market” from view of manufacturers, regions, product types and end industries. The research report analyses and provides the historical data along with current performance of the global PP Pipe industry, and estimates the future trend of Harmonic Drive on
Harmonic Drive Gear Reduction
Publisher Research announces that it has published a new study Harmonic Drive Precision Strain Wave Reducer Gearboxes and RV and RD Reducers: Market Shares, Strategy, and Forecasts, Worldwide, 2018 to 2024. The 2018 study has 230 pages, 141 tables and figures. The leading vendors in the harmonic drive industry have invested in high-quality technology and processes to develop leading edge reducer strain relief gearbox capability. Request Sample Copy at http://www.reportsweb.com/inquiry&RW00011308042/sample Harmonic
Hard Disk Drive Market 2017-2027 Expected to Drive Growth
In recent past it has been observed that the Hard disk drive market is negatively affected, driven by falling sales in the PC market. But a trend that helped to boost the market growth is the innovation of high-storage portable external hard disks. Hard disk drive market is directly affected by the flash-based SSDs. In now days the adaptation of flash based SSDs in Laptops and personal computers continue
Harmonic Drive Market Forecasts – HDSI, Leaderdrive, Beijing CTKM Harmonic Dri …
For overview analysis, the report introduces Harmonic Drive Market basic information including definition, classification, application, industry chain structure, industry overview, policy analysis, and news analysis, etc. Harmonic Drive Market : Harmonic Drive is a compact, high performance, precision reduction gear. It is one of the key components used in robotic products such as collaborative work robots. The gear consists of only 3 basic parts (Wave Generator, Flex spline, and Circular Spline). It
Harmonic Drive Market 2017- HDSI, Leaderdrive, Beijing CTKM Harmonic Drive
The Global Harmonic Drive Market 2017 Industry Research Report focused on major manufacturers, regions, type as well as application of the Harmonic Drive industry.“Harmonic Drive is a compact, high performance, precision reduction gear. It is one of the key components used in robotic products such as collaborative work robots. The gear consists of only 3 basic parts (Wave Generator, Flex spline, and Circular Spline). It provides excellent features not
New Compact Linear Drive
PIShift drives are compact and cost-efficient piezo linear drives from PI (Physik Instrumente), the Karlsruhe specialist for positioning systems. The drives use the stick-slip effect and, due to the high operating frequency of more than 20 kHz, they are noiseless. The load is coupled to the moving rod. Typical applications of drives operating with this principle are the adjustment of optical and opto-mechanical components, cell manipulation as well as industrial applications