Composite Surfacing Films Market likely to reach an estimated value of US$ 320.3 million by 2024, as estimated by Stratview Research

Stratview Research in its recent report has offered an overlook of the current Composite Surfacing Films Market scenarios and has also estimated the Composite Surfacing Films Market to reach an estimated value of US$ 320.3 million by 2024. The insights highlighted in the report are based on data that is carefully collected from reliable sources and is then scrutinized to have a proper analysis.
Not only the report offers the market size but also details about the market segmentation with its share. Stratview Research also extends its research to offer a forecast of the market during the period of 2019 – 2024, to provide the clients with base knowledge of the market and make strategies to have beneficial results ahead.

Click here for a Free Sample of the report (additional insights inside):
https://www.stratviewresearch.com/Request-Sample/384/Composite-Surfacing-Films-Market.html

Composite materials have a disruptive journey of more than seven decades. For instance; during the 1940s, the first-generation glass fiber-reinforced composites for the aerospace industry were developed and created ample opportunities for the researchers and scientists to develop stiffer and stronger composites in order to avoid undesirable flaws such as micro-cracks on the surface. In the early stages, structural film adhesives were used to cover the prepregs in the mold, which does not provide a sufficient blemish-free surface to composite parts. Thus, it requires an extra set of activities such as sanding and polishing to make it smooth and paint-ready. These activities increase the workload of labor as well as add significant cost and processing time. This has led to the development of the resin-rich, adhesive-based composite surfacing films to reduce the surface defects by approximately 95%, making the manufacturing easier. The newly developed composite surfacing films protect the composite surface from sanding and bead blasting required for paint stripping activities and eliminate surface imperfections. It is also tough to resist any cracks during thermocycling. In addition, composite surfacing film provides protection to exposed composite parts against UV radiation and lightning strike, when it is embedded with expanded copper or aluminum metallic foils.
Rising demand for the aerodynamic surface, high-quality surface finish with reduced imperfections and paint preparation activities have created an ample growth opportunity for composite surfacing film manufacturers in the aerospace industry. Increasing usage of non-conductive composites in the exterior parts of the next-generation aircraft has also increased concerns of airlines regarding the safety and security of inboard passengers and crew members against lightning strikes. Integration of metallic mesh with composite surfacing films not only solves the problems of lightning strikes but also creates an easy handling, storage, and application of thin metallic mesh or foil.
There is a host of factors driving the demand for composite surfacing films in diverse range of applications. Among all, the biggest driving factor is the increasing use of composites in the aerospace, defense, automotive, wind energy, and marine industries. Increasing penetration of composites in the key aircraft programs, such as the development of all-composite wings and fuselage structures of B787 and A350XWB aircraft programs, is the major factor driving the growth of composite surfacing films in the aerospace & defense industry. Increasing usage of CFRP in the automotive body panels along with a high demand for getting Class-A body painted surface finish has created ample opportunities for the composite surfacing film manufacturers to develop and innovate composite surfacing films for the automotive industry.

Click here for description of the report:
https://www.stratviewresearch.com/384/Composite-Surfacing-Films-Market.html

The market is segmented based on the end-use industry type as Aerospace & Defense, Automotive, and Others. The aerospace & defense industry is expected to remain the growth engine of the market during the forecast period of 2019 to 2024. Increasing production rates of the key aircraft programs, such as B737, B787, A320, and A350XWB; introduction of variants of the best-selling aircraft programs (A320neo, B737 Max, B777x, and A330neo); market entry of new aircraft (C919 and MC-21); increasing demand for high-quality and lightweight components in the aerospace industry; and increasing penetration of composites in the aerospace industry are the major growth drivers of composite surfacing films in the aerospace & defense industry. Wind energy, automotive, and marine are the other major end-use industries of composite surfacing films.
Based on the application type, the market is segmented into Wings, Fuselage, Control Surfaces, Automotive Body Panels, and Others. The fuselage application segment is expected to maintain its dominance in the market during the forecast period, driven by increasing penetration of composites in the segment. The wings application is also likely to grow at an impressive rate in the coming five years.
Based on the curing type, the market is segmented into Autoclave and Out-of-Autoclave. A higher usage of the autoclave process by major tier players across regions has made the segment dominant in the composite surfacing films market. However, out-of-autoclave curing type is expected to witness a higher growth during the forecast period.
In terms of region, North America is expected to remain the largest market during the forecast period. The USA is the growth engine of the region’s market with the presence of all major aircraft OEMs, tier players, composite surfacing film suppliers, and raw material suppliers.
Asia-Pacific is likely to witness the highest growth during the same period, driven by a host of factors including increasing demand for commercial aircraft to support rising passenger traffic, the opening of assembly plants of Boeing and Airbus in China, upcoming indigenous commercial and regional aircraft (COMAC C919 and Mitsubishi MRJ), and rising aircraft fleet size.

Check out the Table of Contents here:
https://www.stratviewresearch.com/toc/384/Composite-Surfacing-Films-Market.html

Highlights of the Report:
The composite surfacing films market is forecasted to grow at an impressive rate over the next five years to reach an estimated value of US$ 320.3 million in 2024. An organic growth of the aircraft industry coupled with an increased penetration of composites in the structural sections of the next-generation aircraft is the primary driver of the sustainable demand for composite surfacing films in the aerospace & defense industry. Airbus anticipated that there would be total deliveries of 37,390 aircraft worth US$ 5.8 trillion in the global marketplace during 2018-2037. Asia-Pacific and North America would be the largest demand generators with a combined share of 59.4% of the total aircraft deliveries during 2018-2037. An expected healthy CAGR of 4.4% in air passenger traffic during 2018-2037 will chiefly drive the demand for the aircraft. This factor will create a sustainable demand for composite parts incorporating composite surfacing films for aircraft exteriors in the foreseeable future.
The supply chain of this market comprises raw material suppliers, composite surfacing film manufacturers, composite part fabricators, distributors, aircraft and automotive OEMs, airlines, aircraft leasing companies, and MRO companies. The key composite surfacing film manufacturers are Solvay S.A., Koninklijke TenCate B.V., The 3M Company, Gurit Holding AG, Henkel AG & Co. KGaA, Hexcel Corporation, Park Electrochemical Corporation and Axiom Materials, Inc. The development of high-performance composite surfacing films, expansion in untapped and growing markets, and execution of mergers & acquisitions are the key strategies adopted by the major players to gain a competitive edge in the market.

Features of the Report
This report offers high-quality insights and is the outcome of detailed research methodology comprising extensive secondary research, rigorous primary interviews with industry stakeholders and validation and triangulation with Stratview Research’s internal database and statistical tools.

The Composite Surfacing Films Market analysis report discusses the following heads in great detail:
• Market structure: Overview, industry life cycle analysis, supply chain analysis
• Market environment analysis: Growth drivers and constraints, Porter’s five forces analysis, SWOT analysis
• Market trend and forecast analysis
• Market segment trend and forecast
• Competitive landscape and dynamics: Market share, product portfolio, product launches, etc.
• Attractive market segments and associated growth opportunities
• Emerging trends
• Strategic growth opportunities for the existing and new players
• Key success factors

Stratview Research
400 Renaissance Center,
Suite 2600,
Detroit, Michigan, MI 48243
United States of America
Phone No. +1-313-307-4176
sales@stratviewresearch.com

Know more about us and our reports:
Stratview Research has been offering its insightful reports and custom researches to the interested clients in some of important industry sectors such as Advanced Materials, Aerospace & Defense, Automotive & Mass Transportation, Consumer Goods, Construction & Equipment, Electronics and Semiconductors, Energy & Utility, Healthcare & Life Sciences, and Oil & Gas. The data is collected for the reports is collected from reliable sources and is analysed carefully to come up with an end result that is resourceful and worthy for the interesting clients.

This release was published on openPR.