James Instruments Scholarship Awarded at the 2011 ACI Spring Convention
The ACI convention represents a significant chance for our customers to try the equipment and to provide us with feedback on what they are looking for. On display were;
V-Meter™ MK III: The most advanced System for Ultrasonic Pulse Velocity in Concrete, Wood, Ceramic and other Coarse grained and Construction Materials. This test method rapidly and easily allows you to locate cracks, voids, rot and other areas of inhomgenity in the material under test. Complete System includes transducers, instrumentation unit, cables and software for PC, Conforms to ASTM C - 597 and other standards
Trident™:A Microwave Meter Used for the Rapid Determination of Moisture Content in Sand and Other Fine or Coarse Aggregates. It is fast and easy to use as well as completely portable.
Rebound Hammers provide the most economical, quick and easy concrete compressive strength test in the field. It will also provide an indices of hardness and compressive strength for other construction materials. Conforms to ASTM C-805 and other International Standards.
James Instruments Inc. had a staff of two to greet customers and meet with the industry. Nestor Chonillo, Vice President, and Nelson Flores Inside Sales were on hand to answer customers questions.
“The ACI convention gives us the opportunity to hear the demand of just not your everyday concrete professional but also the University professors and students “says Nestor Chonillo, Vice President of James Instruments Inc.
The ACI-James Instruments Inc. student award was also presented at the ACI spring convention for research on NDT of concrete. James Instruments Inc Vice President, Nestor Chonillo had the honor to present the 2011 award to Ph.D. Seong-Hoon Kee for his research titled “Low- Cost Piezoceramic sensors for health monitoring of concrete structure”. His research paper was chosen as the best of 13 entries by a panel of experienced NDT professional. Also pictured is Professor Ph.D Jinying Zhu which was the advisor for Seong-Hoon Kee during his research. “It is very exciting to see the great research that these students conducting. This was a record year for entries and I’m the sure that number will keep rising from this point forward” says Nestor Chonillo, Vice President of James Instruments Inc.
The American Concrete Institute (ACI) is a nonprofit technical and educational society organized in 1904 and is one of the world's leading authorities on concrete technology. ACI is a forum for the discussion of all matters related to concrete and the development of solutions to problems. ACI conducts this forum through conventions and meetings; the ACI Structural Journal, the ACI Materials Journal, Concrete International, and technical publications; chapter activities; and technical committee work. As its chartered objective states, its purpose is "to provide a comradeship in finding the best ways to do concrete work of all kinds and in spreading that knowledge."
James Instruments specalises in Non-Destructive testing equipment for concrete and other construction materials. Central to the improvement of the concrete infrastructure are tools that evaluate the condition of existing construction. Destructive and non-destructive testing (NDT) techniques are applied. Destructive tests can provide direct information, but are relatively expensive, time-consuming and cause damage to the structure. Destructive test results often cannot be evaluated using statistical approaches because the number of locations in the structure that can be tested without damage to the structure is limited. On the other hand, NDT techniques are relatively inexpensive to apply, and they can detect, localize, and characterize flaws and damage in concrete structures without leaving any undesirable discontinuities or causing damage to concrete members.
James Instruments Inc. is the leading manufacturer of non-destructive test equipment for construction materials, specifically concrete, ceramic, wood and other coarse grained materials. We supply the instruments that measure and analyze strength, structure, corrosion and moisture in concrete and other construction materials. And more. James Instruments -- rugged, quality equipment for field use -- backed by factory service and an ongoing program of research and development.
For More information regarding this or other non destructive testing equipment for construction materials you can visit www.ndtjames.com or email email@example.com or firstname.lastname@example.org.
James Instruments Inc.
3727 N. Kedzie Avenue
Chicago, IL. 60618
This release was published on openPR.
Permanent link to this press release:
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release James Instruments Scholarship Awarded at the 2011 ACI Spring Convention here
News-ID: 174275 • Views: 1510
More Releases from James Instruments Inc.
James Instruments Inc. Releases the V-Meter MK IV™Ultrasonic Pulse Velocity Sy …
James Instruments Inc. announces the release of the V-Meter MK IV™, ultrasonic pulse velocity system for finding voids, crack and determining other material properties in concrete, wood, ceramic, masonry and other coarse grain materials. Cracks, voids and honey combs are most sensitive to the stress waves caused by ultrasonic testing, this makes the V-Meter MK IV™ one of the most effective methods for determining quality of coarse grained materials.
Windsor Probe Test System™ Featured In History Channel’s Inspector America
James Instruments Inc. manufacturer of the world's most advanced Non Destructive Test Equipment for construction materials is pleased to announce the demonstration of their equipment on Inspector America currently broadcast on the History Channel. This demonstration of the test method over other test methods shows unequivocally the superiority of the test method for testing concrete compressive strength on existing structures in situ. “It is very exciting to have our equipment
James Bond Test™ MK III Developed for Adhesion, Bond and Other Tensile Strengt …
James Instruments Inc. manufacturer of the world's most advanced Non Destructive Test Equipment for construction materials has developed the James Bond Test MK III for measuring the bond strength/tensile strength/adhesion strength of concrete, asphalt, tile, concrete repair, or other overlay material by the direct tension or pull off method. It uses disc attached to the material under test to, 1. Measure the
James Instruments Inc., leading manufacturer of non destructive test equipment a …
Chicago, IL, USA February 2nd , 2011, James Instruments Inc. manufacturer of the world's most advanced Non Destructive Test Equipment for construction materials has released a new catalog for 2011. This catalog features equipment for the contractor, engineer, material producer, and educational institution. The catalog features equipment that analyzes concrete, mortar, brick, masonry, drywall, wood, soil, and ceramics. The instruments are featured to determine strength, locate objects in structures, evaluate
More Releases for ACI
Anti-Money Laundering (AML) Software Market Is Booming Worldwide (CAGR of 16.3%) …
A new research document is added in HTF MI database of 125 pages, titled as 'Anti-Money Laundering (AML) Software - Global Market Outlook (2017-2026)' with detailed analysis, Competitive landscape, forecast and strategies. The study covers geographic analysis that includes regions important players/vendors such as ACI Worldwide, Inc., Oracle, EastNets, FICO TONBELLER, NICE Actimize, Regulatory DataCorp, Inc., Safe Banking Systems LLC, SAS Institute Inc., Thomson Reuters Corporation, Truth Technologies, Inc., Verafin
Proximity Mobile Payment Market Analysis And Key Development By Manufacturers- S …
Proximity Mobile Payment Market report provides a basic overview of the industry including its definition, applications and manufacturing technology. Then, the report explores the international major industry players in detail. In this part, the report presents the company profile, product specifications, capacity, production value, and 2018 market shares for each company. Through the statistical analysis, the report depicts the Global total market Proximity Mobile Payment industry including capacity, production, production
Global Proximity Mobile Payment Market 2018 - Alphabet, Square, ACI, PayPal
Global Proximity Mobile Payment Market 2018 Analysis Report audits a Market Regions, Product Categories, with Sales, Business Revenue, Goods cost, Proximity Mobile Payment piece of the overall industry and Growth patterns, concentrating on driving Proximity Mobile Payment industry players, showcase size, request and supply examination, utilization volume, Forecast 2018 to 2025. The major regions present in the continents like United States, Germany, Japan and China and their contribution to global Proximity
Global Air Knife Market 2017 - EXAIR, ITW Vortec, ACI, Vortron
Worldwide Air Knife 2017 Research Report presents a professional and complete analysis of Global Air Knife Market on the current situation. In the first part, the report provides a general overview of the Air Knife industry 2017 including definitions, classifications, Air Knife market analysis, a wide range of applications and Air Knife industry chain structure. The 2017's report on Air Knife industry offers the global Air Knife development history, development trends
Biotage Launches ACI™ - Accelerated Chromatographic Isolation
Uppsala, Sweden (July 10, 2014) -- Biotage (STO: BIOT), a leading global supplier of solutions and technology for analytical, medicinal and peptide chemistry, announces the launch of ACI™ (Accelerated Chromatographic Isolation), a new advance converting simple flash purification into a faster and more economical way to isolate pure compounds. Biotage believes that ACI™ will radically improve the efficiency of the laboratory, embracing the latest developments in purification technology to guide chemists
SCIP Joins Forces with ACI to Offer Competitive Intelligence Certification
World’s largest competitive intelligence professional group joins forces with the leading competitive intelligence training organization to offer global certification in the field A joint venture between SCIP and ACI, the world’s leading competitive intelligence training organizations, advances the profession’s standards for this relatively young field through a quality certification program. Alexandria, Va. March 23, 2011 -- The Strategic and Competitive Intelligence Professionals (SCIP) society and the Fuld-Gilad-Herring Academy of Competitive Intelligence LLC