openPR Logo
Press release

Conformal Coatings Market Worth $16.9 Billion By 2026 | Industry Players - Electrolube, Kisco Conformal Coatings, H.B. Fuller, Chase Corporation, Henkel AG & KGaA, Illinois Tool Works, and Dow Corning.

Conformal Coatings Market

Conformal Coatings Market

The Report “Conformal Coatings Market Share, Size, Trends, Industry Analysis Report, By Material Type (Acrylic, Epoxy, Urethane, Silicon, Parylene, and Others); By End-use (Consumer Electronics, Automotive, Aerospace & Defense, Industrial, Marine, Medical, and Others), By Regions, Segments & Forecast, 2018 - 2026” The Global conformal coating market is estimated to grow to USD 16.9 billion by 2026 according to a new report published by Polaris Market Research.

Request for sample of this research report @ https://www.polarismarketresearch.com/industry-analysis/conformal-coatings-market/request-for-sample

Conformal coating is a protectant that is a polymer or chemical film applied on electronic circuits to keep them free from harsh environmental conditions such as chemical contaminants and moisture in the air. These products maintain long-term surface insulation resistance and ensure the operational integrity of the circuit board.

Rising demand for consumer electronics, advancements in medical equipment, and emerging smart vehicle technologies are some of the prominent factors that broadly make use of these products and are these are driving its market. Increase in consumer disposable income and rising demand for modern electronic devices such as mobile phones, laptops, and other gadgets have tremendously driven the growth of specific products that are used in electronics components.

Automotive is one of the fastest growing end-use segments for these products. The emergence of smart electric hybrid vehicles is continuously brimming with technology and has witnessed rapid growth rate as it’s an energy-efficient alternative. To make these vehicles more comfortable, fuel-efficient, and safer, use of electronic gadgets is high in these vehicles and its use is increasing along with rising sophistication of EV. This has led to increased application of electronic assemblies and conformal coatings.

Browse summary of this report with TOC @ https://www.polarismarketresearch.com/industry-analysis/conformal-coatings-market

Initially these products were specifically applied to medical and military products as the process and cost were substantially higher per unit. However, with innovative processes and development of material technology, prices of these products have decreased over the last few years. In the current scenario conformal coatings have become increasingly common for electronic components and circuitry.

Some of the recent technological advancements for the market include low viscosity solvent-free conformal coating, parylene-like hydrophobic conformal coating, silicone-based conformal coating for corrosion, and single component conformal coating material to protect sensitive information on PCBs.

These products are of different types based on their material of formulation. These coatings are used depending on their characteristics and required efficiency. Acrylic conformal coating is the largest product segment by material. Polyurethane, epoxy, and parylene are among the fast-growing segments.

Inquire before-buying @ https://www.polarismarketresearch.com/industry-analysis/conformal-coatings-market/inquire-before-buying

Most of the product manufacturers, device fabricators, and PCB assemblers prefer solvent-free conformal coatings for environmental and economic reasons, though, solvent based ones enhance performance. On account of more demand for “green chemicals”, certain resins are growing at a faster pace as compared to the traditional ones such as acrylics.

The global industry constitutes of a large number of multinationals and regional players and some of the key market players include Electrolube, Kisco Conformal Coatings, H.B. Fuller, Cytec Industries Inc., Chase Corporation, Henkel AG & KGaA, Illinois Tool Works, and Dow Corning.

Key Segments:

Conformal Coatings Market Size and Forecast by Material Type

• Key Findings
• Acrylic
• Epoxy
• Urethane
• Silicon
• Parylene
• Others

Conformal Coatings Market Size and Forecast by End-Use Type

• Key Findings
• Consumer Electronics
• Automotive
• Aerospace & Defense
• Industrial
• Marine
• Medical
• Others

Conformal coatings Market Size and Forecast by Regions

• North America [U.S., Canada]
• Europe [Germany, UK, France, Italy, Spain, Belgium, Netherlands, Rest of Europe]
• Asia-Pacific [China, India, Japan, South Korea, Singapore, Malaysia, Rest of Asia-Pacific]
• Latin America [ Brazil, Mexico, Argentina, Rest of Latin America]
• Middle East and Africa [Israel, South Africa, Saudi Arabia, UAE, Rest of MEA]

Check for discount @ https://www.polarismarketresearch.com/industry-analysis/conformal-coatings-market/request-for-discount-pricing

About Polaris Market Research

Polaris Market Research is a global market research and consulting company. The company specializes in providing exceptional market intelligence and in-depth business research services for our clientele spread across different enterprises. We at Polaris are obliged to serve our diverse customer base present across the industries of healthcare, technology, semi-conductors and chemicals among various other industries present around the world. We strive to provide our customers with updated information on innovative technologies, high growth markets, emerging business environments and latest business-centric applications, thereby helping them always to make informed decisions and leverage new opportunities. Adept with a highly competent, experienced and extremely qualified team of experts comprising SMEs, analysts and consultants, we at Polaris endeavor to deliver value-added business solutions to our customers.

Contact us

Mr. Rohit
Corporate Sales, USA
Polaris Market Research
Phone: 1-646-568-9980
Email: sales@polarismarketresearch.com
Web: www.polarismarketresearch.com

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Conformal Coatings Market Worth $16.9 Billion By 2026 | Industry Players - Electrolube, Kisco Conformal Coatings, H.B. Fuller, Chase Corporation, Henkel AG & KGaA, Illinois Tool Works, and Dow Corning. here

News-ID: 1692746 • Views: 179

More Releases from Polaris Market Research & Consulting

What's driving the Blockchain Technology Market Trends? Microsoft Corporation, I …
The worldwide market size for blockchain technology is estimated to grow at a CAGR of 41.6% between 2018 and 2026 and is anticipated to reach USD 16.82 billion by 2026. According to a new study published by Polaris Market Research. Also termed as Distributed Ledger Technology (DLT), blockchain enables secure transaction over a distributed network. Since the transactions are taken place usually over the network, it is difficult to reverse
What's driving the Precision Farming Market Trends? Ag Leader Technology, AgJunc …
The global precision farming/agriculture market was valued at 3,833 million in 2017 and is anticipated to reach over USD 13,016 million by 2026 with grow at a CAGR of more than 14.7% during the forecast period According to a new study published by Polaris Market Research. In 2017, the yield monitoring application dominated the global market, in terms of revenue. North America is expected to be the leading contributor to
What are the different trends in Electric Vehicles (EV) Market to boost its grow …
Polaris Market Research has new report published the addition of the “The global Electric Vehicles Market Worth $912 Billion By 2026 | CAGR: 38.4%”, the report classifies the global Electric Vehicles market in a precise manner to offer unearth valuable, accurate and reliable data insights that help organizations to meet their business objectives and enable growth Get PDF Sample of “Electric Vehicles Market”: https://www.polarismarketresearch.com/industry-analysis/electric-vehicles-ev-market/request-for-sample The global electric vehicles market is anticipated to
What are the different trends in Third Party Logistics Market to boost its growt …
Polaris Market Research has new report published the addition of the “The global third-party logistics market is anticipated to reach USD 1,337.91 billion by 2026”, the report classifies the global third-party logistics market in a precise manner to offer unearth valuable, accurate and reliable data insights that help organizations to meet their business objectives and enable growth according to a new report The report “Third Party Logistics (3PL) Market Share, Size,

All 5 Releases


More Releases for Conformal

Conformal Coatings Market Size, Share, Development by 2024
Global Info Research offers a latest published report on Conformal Coatings Market Analysis and Forecast 2019-2025 delivering key insights and providing a competitive advantage to clients through a detailed report. The report contains 102 pages which highly exhibit on current market analysis scenario, upcoming as well as future opportunities, revenue growth, pricing and profitability. Click to view the full report TOC, figure and tables: https://www.globalinforesearch.com/global-conformal-coatings-market_p108841.html   A Conformal coating is a protective chemical coating
Conformal Coatings In Electronics Market Rugged Expansion Foreseen by 2020
Conformal coatings are used to protect electronic components from dust, chemicals, moisture and temperature extremes. There are various coating methods are available by which coating materials can be applied. These methods include brush coating, spray application coating and conformal coating dipping. Brush coating can be applied by flow coating the material onto the board and is usually suitable for low volume application, finishing and repair. Brush is coating is highly
Conformal Coatings Industry Trends and key Insights by 2024
A new research report by Transparency Market Research offers a comprehensive evaluation of the global Conformal Coatings Market. The study, titled “Conformal Coatings Market - Global Industry Analysis, Size, Share, Growth, Trends, and Forecast 2016 - 2024”, is available for sale on the firm’s website. Global Conformal Coatings Market: Overview Conformal coating is a special type of coating applied to electronic devices in order to protect them from external factors such as
Global Conformal Coating Equipments Market Research Report 2017
Summary This report studies Conformal Coating Equipments in Global market, especially in North America, Europe, China, Japan, Southeast Asia and India, focuses on top manufacturers in global market, with capacity, production, price, revenue and market share for each manufacturer, covering Nordson Ultrasonic Systems (USI) Precision Valve & Automation GLENRO INC Specialty Coating Systems Para Tech SCH Technologies Hitachi High-Technologies TTnS Market Segment by Regions, this report splits Global into several key Regions, with production, consumption, revenue, market share and growth rate
Conformal Coatings Market - Market Growth over the Forecast Period 2021
The report covers forecast and analysis for the Conformal Coatings market on a global and regional level. The study provides historic data of 2015 along with a forecast from 2016 to 2021 based on volume and revenue (USD Million). The study includes drivers and restraints for the market along with the impact they have on the demand over the forecast period. Additionally, the report includes study of opportunities available in
Conformal Coatings Market in Electronics Aims Bigger with Technological Innovati …
Conformal coatings are used to protect electronic components from dust, chemicals, moisture and temperature extremes. There are various coating methods are available by which coating materials can be applied. These methods include brush coating, spray application coating and conformal coating dipping. Brush coating can be applied by flow coating the material onto the board and is usually suitable for low volume application, finishing and repair. Brush is coating is highly