openPR Logo
Press release

Elesa hygiene levelling feet are now EHEDG Certified

03-14-2019 12:20 PM CET | Industry, Real Estate & Construction

Press release from: Elesa UK

/ PR Agency: The Industrial Marketing Agency
Elesa hygiene stainless steel levelling feet now EHEDG Certified

Elesa hygiene stainless steel levelling feet now EHEDG Certified

Elesa’s LM.F-HD-SST series of levelling feet in stainless steel with permanent floor mounting facility are now EHEDG certified (European Hygienic Engineering & Design Group).

This means that they offer significant advantages in improved hygiene and reduced cleaning time (and resources), so enhancing the environment of industrial areas such as in food production, pharmaceutical, paint and dye manufacture and similar, as well as saving on use of cleaning materials and time taken in wash-down cycles.

For example, there can be up to 25% time saving with less consumption of water, energy and cleaning agents, by use of specific design criteria with high grade stainless steel and FDA/EU compliant plastics.

Elesa explain that in the food industry, medical technology and the pharmaceutical industry, product safety and consumer protection are becoming increasingly important. Due to their specific properties, standard parts in hygienic design can assist the production process in these sensitive areas, and facilitate the manufacture of products with a long shelf life, which are free from preservatives.

Maximum hygiene is a fundamental requirement, not only where food is produced. Hygiene also plays an increasing role in other industrial areas, from the pharmaceutical industry to the manufacture of paints and dyes. Nowadays, a major issue is the manufacture of products without added preservatives or with as few added preservatives as possible, while still achieving a long shelf life. However, this can only be achieved in a production environment in which all risks of contamination with microorganisms or dirt are excluded. For plant construction, this means that all components, elements, as well as surfaces, must be designed accordingly. Contaminants must not accumulate and must be easy to remove.

The LM.F-HD-SST in sizes from 30000N to 67000N is part of the Elesa Hygiene Design range which includes a series of knobs and handles all to hygienic design criteria.

Further information on the LM.F-HD-SST series of levelling feet from Elesa may be found at www.elesa.com/en/elesab2bstoreuk/Levelling-elements-and-supports--Levelling-elements-Hygienic-Design--LMF-HD-SST or follow them on twitter: www.twitter.com/ElesaUK.

Elesa is a supplier of a wide range of standard metal and plastic machine parts to the mechanical engineering industry.

A natural appreciation of quality design and ergonomic research; a business culture firmly focused on product quality; the recognition of its brands as guarantees of quality and reliability, the continuous attention to clients’ needs and a fast and careful service have made Elesa a reference point for designers and builders. More than 40,000 product codes, 180 patents and 38 international design awards produced with systems certified to ISO 9001, ISO14001 and ISO18001 all supported by a worldwide branch and distribution network offering localised stock and technical support.

Elesa (UK) Ltd
26 Moorlands Estate
Metheringham
Lincolnshire
LN4 3HX
Tel: 01526 322670
www.elesa.com
email: sales@elesa.co.uk

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Elesa hygiene levelling feet are now EHEDG Certified here

News-ID: 1653993 • Views:

More Releases from Elesa UK

Elesa standard component manufacturing goes Green with hydroelectric and other 100% renewable power
Elesa standard component manufacturing goes Green with hydroelectric and other 1 …
Elesa are delighted that their “Elesa goes Green” program has recently advanced with the signing of a “renewable energy” contract with major supplier A2A. The “Elesa goes Green” program means that in their Monza production plant Elesa are now contracted to use only electricity from 100% renewable sources. That is to say only energy produced through the use of natural resources (water, sunlight, wind, tides, geothermal heat etc.) which therefore
Elesa angled handles inclined to make things easier for many industries
Elesa angled handles inclined to make things easier for many industries
The new Elesa range of angled bridge handles provide a safe and ergonomic grip close to the edge of a door, ensuring safe and easy operation. Traditionally, bridge handles are used on sliding doors, access panels, drawers, and cases. The angled feature distances and translates forces at a more aligned angle, so reducing the perceived effort involved in closing sliding doors or lifting equipment. Elesa ESP, MSP and GN 430 angled
Elesa launch high performance Misati pneumatic clamps for automation and robotics applications
Elesa launch high performance Misati pneumatic clamps for automation and robotic …
Elesa announce for this year a partnership with the well-known name of Misati, whose high-performance pneumatic clamps offer exceptional clamping action in work holding, or transport of assemblies in manufacturing operations. They are designed for robotic use, being easy to install, robust and well proven, with fast and reliable operation supported by simple power and control connections which enable rapid installation and setup. This easy installation with high quality design
New Hinges from Elesa get the best out of reinforced technopolymers
New Hinges from Elesa get the best out of reinforced technopolymers
Elesa have long been market leaders in the use of reinforced technopolymers for robust industrial applications and specialised environments – so they are again delighted to announce new hinge products in this material. The Elesa range of hinges in engineering plastics are designed for protective enclosures, cabinets and frames where strength, lightness, cost and corrosion resistance are key factors in provision of doors or access panels. New CFTX-PP hinges in glass

All 5 Releases


More Releases for EHEDG

Axtel: Providing Trusted Turnkey Processing plant for Spices and Steam Steriliza …
Axtel, a leading specialist in process solutions, offers Turnkey processing plant for spices and a Steam Sterilization for powder spices. Axtel specializes in providing customized spices processing systems, featuring integrated and automated plants that minimize human touch and ensure continuous, efficient output. The low temperature grinding solutions use cold air and/or liquid nitrogen (cryogenic grinding technology) to produce high-yield, high-quality powders with better color, flavor, and aroma. The expertise covers various
Robust Hygienic Pumps and Valves Market Growth at a Healthy CAGR Despite COVID-1 …
"𝐇𝐲𝐠𝐢𝐞𝐧𝐢𝐜 𝐩𝐮𝐦𝐩𝐬 𝐚𝐧𝐝 𝐯𝐚𝐥𝐯𝐞𝐬 𝐦𝐚𝐫𝐤𝐞𝐭 𝐭𝐨 𝐠𝐫𝐨𝐰 𝐚𝐭 𝐚 𝐬𝐢𝐠𝐧𝐢𝐟𝐢𝐜𝐚𝐧𝐭 𝐫𝐚𝐭𝐞 𝐟𝐫𝐨𝐦 𝟐𝟎𝟐𝟑 𝐭𝐨 𝟐𝟎𝟐𝟖" 🔥 𝐃𝐨𝐰𝐧𝐥𝐨𝐚𝐝 𝐅𝐫𝐞𝐞 𝐏𝐃𝐅 𝐒𝐚𝐦𝐩𝐥𝐞 𝐑𝐞𝐩𝐨𝐫𝐭 + 𝐃𝐞𝐭𝐚𝐢𝐥𝐞𝐝 𝐓𝐎𝐂 ➡️ https://www.reportsnreports.com/contacts/requestsample.aspx?name=7196104 The global hygienic pumps and valves market size is estimated to grow from USD 2.3 billion in 2023 to USD 2.8 billion by 2028, at a CAGR of 3.7%. The manufacturers of pharmaceuticals, food, beverages, and dairy products must adhere to the regulations formed by
Cost-Effective, Reliable Performance is Easily Achieved with Alfa Laval’s New …
/ins Alfa Laval OptiLobe rotary lobe pumps are cost-effective, reliable and versatile alternatives for general applications requiring gentle product treatment and easy serviceability. To meet the requirements of lower flow rates and higher production capacities, the addition of the Alfa Laval OptiLobe 10 and OptiLobe 50 adds 4 new pump sizes to the product range. These new pumps will also provide the possibility of having heating/cooling front covers for processes,
New from Alfa Laval - Efficient Self-Priming Pumps for Improved Performance
/ins Alfa Laval’s LKH Prime 40 is the latest new addition to the range. Not only does the hygienic, self-priming pump offer high energy efficiency and versatility, it also allows for significantly reduced noise levels and easy maintenance. In utilizing the Alfa Laval LKH Prime 40, performance is greatly increased, including the ability to reach a flowrate up to 110 m3/hr and head of 115m. Improved energy efficiency Using the combination
Elesa UK announce standard machine components for 2019
Elesa, as one of the world’s market leading manufacturers, are pleased to announce their continually expanding range of high quality machine components. Elesa have a much-respected history of over 75 years in the design and manufacturing of innovative, ergonomic products, boasting unique design features and advanced quality characteristics. Ex-stock and made in Italy are worthwhile claims for components such as handwheels, handles, clamping knobs, position indicators, knobs, latches, hinges, castors and
Elesa LMHD levelling feet – meeting hygiene standards, cleaning quickly and ef …
The Elesa LMHD hygienic levelling feet with mounting holes provide rugged adjustable equipment mounting and facilitate reduced cleaning work – which can be up to 25% of the production time. Thus leaving more time available for production, with less use of resources such as fresh water, energy and cleaning agents, also with less waste water to process, and so lower total costs. LMHD series feet are certified according to EHEDG guidelines