Press release
Global Produced Water Treatment Systems Market Key Players Aker Solutions, Siemens AG, FMC Technologies, Inc., Alderley plc
PMR’s global produced water treatment systems market report for a five-year forecast period 2015-2020 indicates that the market registered a value of US$ 4.6 Bn in 2015, and is likely to witness steady growth by 2016 end.View complete report: https://www.persistencemarketresearch.com/market-research/produced-water-treatment-systems-market.asp
With rising demand for crude oil and gas, the need for extraction and production has consistently been on the rise since the past decade. This will remain a key factor propelling the demand for effective produced water treatment systems globally. Moreover, developing regions are constantly facing challenges regarding availability of usable water, which is also identified to fuel the market for better, more efficient, and cost-effective water treatment solutions over the next few years.
PMR expects increased volumes of produced water generation by 2020 end. In addition, the market also estimates spiking ratio of oil-to-produced water. These factors are anticipated to collectively drive the market in the near future.
Request for sample report: https://www.persistencemarketresearch.com/samples/12949
Several governments have been mandating stringent regulatory measures in order to maintain the environmental impact of reuse and disposal of produced water. This will continue to escalate the demand for new water treatment systems. Moreover, reinjection norms of the petroleum industry will continue to boost the market for produced water treatment systems.
The oil and gas industry is consistently observing rising exploration of accessible on-shore and off-shore reserves, which is another important factor foreseen to drive the market growth. Introduction of new water treatment technologies are predicted to support the market post-2016. However, high capital costs associated with installation and operation of produced water treatment systems are likely to remain a barrier to widespread adoption.
On the basis of technology, secondary and tertiary treatment systems segments are identified to be the major market shareholders in 2015. However, tertiary treatment systems segment is expected to emerge faster compared to secondary treatment systems segment. Expanding at an estimated 9.1% CAGR over 2015-2020, tertiary treatment systems segment is projected to account for the largest share of the market by 2020 end.
Based on geography, the global produced water treatment systems market is classified into five regions viz. North America, Latin America, Europe, Asia Pacific, and Middle East and Africa. North America will continue to be the largest regional market for produced water treatment systems, attributed to wide acceptance of tertiary treatment technology among end-use sectors. Up from US$ 1.73 Bn registered in 2015, North America will witness a CAGR of over 8% during 2015-2020. Asia Pacific is expected to be the second largest market with a moderate CAGR of 4% estimated over 2015-2020. Europe and APAC will continue to represent lucrative markets, whereas Latin America’s market share is poised to rise up by 2020 end.
Request Report TOC @ https://www.persistencemarketresearch.com/methodology/12949
The global produced water treatment systems market is operated by a number of companies. Some of the key players analyzed in PMR’s produced water treatment systems market report are Aker Solutions, Siemens AG, FMC Technologies, Inc., Alderley plc, Frames Group, Veolia, Aquatech International, CETCO Energy Services, Ovivo, Eco-Tec, ThermoEnergy Corporation, Schlumberger Limited, Global Water Engineering, Miox Corporation, and Ecosphere Technologies, Inc..
While Alderley plc is recognized as one of the top companies leading in primary treatment technologies, Veolia pioneers in off-shore produced water treatment. Aquatech International is concentrating on low CAPEX and OPEX biological processes, whereas Siemens is focusing solely on advanced biological wastewater treatment.
Persistence Market Research (PMR) is a third-platform research firm. Our research model is a unique collaboration of data analytics and market research methodology to help businesses achieve optimal performance. To support companies in overcoming complex business challenges, we follow a multi-disciplinary approach. At PMR, we unite various data streams from multi-dimensional sources. By deploying real-time data collection, big data, and customer experience analytics, we deliver business intelligence for organizations of all sizes.
Persistence Market Research
305 Broadway
7th Floor, New York City,
NY 10007, United States,
USA – Canada Toll Free: 800-961-0353
Email: sales@persistencemarketresearch.com
Web: http://www.persistencemarketresearch.com
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Global Produced Water Treatment Systems Market Key Players Aker Solutions, Siemens AG, FMC Technologies, Inc., Alderley plc here
News-ID: 1597747 • Views: …
More Releases from Persistence Market Research
Aseptic Packaging Market Set to Grow to US$136.5 Bn by 2033 Driven by Rising Foo …
Introduction: Aseptic Packaging Market Overview and Industry Evolution
The aseptic packaging market has emerged as a cornerstone of modern food, beverage, and pharmaceutical preservation systems. As global consumers increasingly seek safe, long-lasting, and convenient packaged products, aseptic packaging solutions have gained substantial importance. This technology allows products to be sterilized separately from packaging materials and filled in a sterile environment, ensuring extended shelf life without refrigeration or preservatives. The rising demand…
Gas-Insulated Transmission Line (GIL) Market Expected to See Growth to US$836.9 …
Introduction: Rising Demand for Advanced Power Transmission Solutions
The global energy landscape is undergoing a major transformation as nations accelerate investments in renewable energy, grid expansion, and reliable electricity distribution networks. With rapid urbanization, industrialization, and digital infrastructure growth, the demand for uninterrupted and efficient power transmission has never been higher. Traditional overhead transmission systems, while widely used, face challenges related to land constraints, environmental exposure, and transmission losses. This has…
Dimethyl Sulfide (DMS) Market Anticipated to Reach US$ 251.2 Mn by 2033, Driven …
Market Overview: Expanding Demand for Dimethyl Sulfide Across Industries
The Dimethyl Sulfide (DMS) market is witnessing consistent growth due to its widespread applications across food processing, pharmaceuticals, agriculture, and chemical manufacturing. Dimethyl sulfide is an organosulfur compound known for its distinctive odor and reactive properties, making it a crucial intermediate in multiple industrial processes. In food and beverage applications, it is valued for flavor enhancement, while in chemical manufacturing, it serves…
Onyx Stone Market to Surge to Reach US$ 1.8 Bn by 2033 Driven by Construction & …
Market Overview: Rising Demand for Premium Natural Stones
The onyx stone market has gained remarkable prominence in recent years, driven by increasing demand for luxury natural stones in architecture, interior décor, and artistic applications. Onyx, known for its translucent appearance and unique veining patterns, has become a preferred choice for premium residential and commercial projects. The material's ability to elevate aesthetic appeal while maintaining durability has attracted designers, architects, and homeowners…
More Releases for PMR
Starch Derivatives Market Outlook by 2021 : PMR
Starch derivatives, also known as modified starch, are prepared by enzymatically, physically or chemically treating native starch to alter its properties. Starch derivatives are used in a number of industries for various functions. They are used as thickeners and stabilizers in the food and beverage industry, as a tablet binder in the pharmaceutical industry, as an emulsifier in cosmetics, and fiber additive in the animal feed. Some of the other…
Yeast Ingredients Market Outlook by 2021 : PMR
Yeasts are chemoorganotrophs, as they use organic compounds to source energy and do not require sunlight for growth or survival. Yeasts are usually unicellular; although some species may be multi-cellular. The size of yeast depends on the species. Yeasts usually measure 3 to 4 µm in diameter. However, certain yeasts reach up to 40 µm in diameter. Yeasts reproduce asexually through mitosis (a process, in which, the chromosomes in a…
Confectionery Market Outlook by 2021 : PMR
The confectionery market is one of the growing sectors globally . Usually, confections are low in nutrients and high in calorie. Sugar-free confections are gaining popularity in the recent years due to factors such as increasing obesity rate, increasing number of diabetic patients, increasing nutritional and health concerns, and changing lifestyle. The confectionery market can be primarily divided into two broad categories: sugar confectionery and bakers’ confectionery . Sugar confectionery…
Cereal Bars Market Outlook by 2021 : PMR
A cereal bar is made up of nuts, oats, sugar, dry fruits, flour, honey, wheat, corn, and puffed rice. Cereal bars have always been perceived as on-the-go breakfast snack items that are healthier alternatives of chocolate and other snacks. Cereal bars are high in fiber and protein and low in carbohydrates, vitamins, minerals, sodium, and antioxidants. They come in various flavors such as chocolate, peanut butter, banana, caramel, banana, honey,…
Functional Flours Market Share by 2026 : PMR
The natural flours used for specialty applications in the food industry and undergoes different treatment process to improve their properties are called functional flours. The various properties of functional flours include cold binding capacity, thermal binding capacity, machinability, dough hydration etc. The functional flours are classified as waxy, multi-benefit, instant and granulated type depending on its features. They undergo different physical and nutritional treatment to enhance its features. In dietary…
Global Ceilings Market Snapshot by 2020 : PMR
Ceiling is overhead interior portion within the room which covers the upper portion of the room. Main purpose of ceiling is to achieve the desired height of the roof in the room. Ceilings are frequently decorated with attractive paintings, mosaic tiles and other different designs. Major advantage of decorated ceiling is that it gets protected from damage by fingers and dust. There are certain ceilings which are fire resistance; dropping…
