openPR Logo
Press release

High-End Calibration Alliance

01-10-2011 12:58 PM CET | Industry, Real Estate & Construction

Press release from: esz AG calibration & metrology

Due to the latest changes and relocation of the calibration laboratory of the Fluke Deutschland GmbH - one of europe's high end calibration laboratories - the traceability chain in Germany and Europe has been stressed since the middle of 2010. Finally esz AG, together with the newly founded 1A CAL GmbH, supported the setting up of calibration capabilities for primary and secondary laboratory standards for most calibration laboratories, equipment and its users. The corporate shareholding is driven by a strategical and technical alliance: All future calibrations of esz's electrical primary standards will be performed by 1A CALGmbH, which already has achieved accreditation by the German Accreditation Body DAKKS (Reg. No. D-K-15115-01-00). Chief metrologist and CEO Karl-Peter Lallmann and his staff have already proven their metrological experience: Standards, procedures and laboratory have been installed in Kassel in a few months only. Key competence will be the calibration and repair of electrical test & measurement equipment such as primary standards like AC/DC transferstandards, DC voltage references, standard resistors, calibrators and high resoltution DMM´s. Mr. Lallmann guarantees: "1A CAL's small measurement uncertainties will create large impact to the metrological landscape in europe."

esz AG belongs to one of the most renowned enterprises in the calibration range and maintains bases in Germany and Europe. esz AG is established as manufacturer independent, non-party calibrating laboratory and reliable service head office at manufacturers and developers from industry, science and trade. Business activities: A various range of services round the measuring technique for quality assurance and control of measuring and testing equipment.
For over 40 years the letters esz stand for electronic service centre. The headquarters is located west of Munich, established in Eichenau.

esz AG calibration & metrology
Max-Planck-Str. 16
D-82223 Eichenau
Tel: +49(0)8141-88887-0
Fax: +49(0)8141-88887-77

This release was published on openPR.

Permanent link to this press release:

Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release High-End Calibration Alliance here

News-ID: 157801 • Views: 1815

More Releases from esz AG calibration & metrology

Successful kick-off meeting – Munich Calibration Day 2014
“The first Munich Calibration Day has been a very successful event. With the organisation of this extraordinary meeting, esz AG calibration & metrology once more has proven its top position in the industry”, commends Bodo Seewald, managing board of esz AG calibration & metrology. The topic of the premium symposium has been “automation in calibration laboratories”. The participants also were excited and estimated the long overdue technical discussions about this
Increased power for HF-calibrations up to 2,5 GHz
With a new state of the art amplifier system esz AG calibration & metrology realize the 1 GHz benchmark within the means of commercial calibration for radio frequency high power sensors up to 2,5 GHz. The investment was driven by recent requirements in communication technology and due to decreased reliability of existing components. The new rack generates continuous power up to 500 W in particular relevant for linearity and flatness
DAkkS Accreditation
Sligthly delayed esz AG accomplish accreditation by the new and transformed german accreditation body DAkkS (Deutsche Akkreditierungsstelle). All DKD calibrations from 2011 will be performed under the requirements and with the logos of DAkkS and ILAC (International Laboratory Accreditation Cooperation) under Reg. No. D-K-15019-01-00. Thus the range of accreditation includes improved DC, LF and RF measurement uncertainities, calibration of fast edge pulses up to 20 ps and burst generators (according

All 4 Releases

More Releases for GmbH

Snom Technology GmbH extends warranty
Berlin, 5 July 2018 – Snom, the Berlin-based specialist in IP telecommunications, continues to expand its customer service and extends its guaranteed warranty period for all products ordered after 1 July 2018 from two to three years. The IP phones from Snom have always proven to be a popular choice thanks to a variety of features, excellent audio quality, sophisticated firmware offers ¬– and last but not least, a particularly high-quality
Novaliq GmbH Exclusive Interview Released
Ophthalmic Drugs interviews Co-Founder, Chief Innovation Officer, Novaliq GmbH SMi Group’s Ophthalmic Drugs conference is thrilled to welcome Bernhard Guenther, Co-Founder, Chief Innovation Officer, Novaliq GmbH onto the speaker panel for 2017. Bernhard Guenther is the Co-Founder and Chief Innovation Officer at Novaliq. Before taking over the CIO position at the end of last year, he served for 12 years as the CEO of the company. As the CIO he is responsible
Small Hydropower Market: Voith GmbH, ANDRITZ HYDRO GmbH, Alstom S.A.
New York, February 20: Market Research Engine has published a new report titled as “Small Hydropower Market - Global Industry Analysis, Trends and Forecast 2016 - 2022” The small hydropower market is expected to exceed more than 140 GW by 2022. Browse Full Report: Hydropower is a technique of producing electricity that uses moving water to generate electricity. Small scale hydropower has been used as a common method of generating electricity in
Busch Dienste GmbH
Vacuum pumps with a variety of operating principles were exhibited on the Busch stand at Vacuum Expo in Coventry. As the leading manufacturer of vacuum pumps and systems, Busch produces models for all vacuum levels from rough to high vacuum. The main focus of the Busch stand was the COBRA screw technology – proven systems for vacuum generation to 0.01 mbar. These dry-running vacuum pumps are used as standalone vacuum
Leiber GmbH accelerates expansion abroad
Germany, 28/02/2013 Leiber GmbH continues to grow. In order to expand their presence in the international animal feed market, additional partner locations were established in the Chinese cities of Shanghai and Tianjin. Business partners are now on hand in Benin, Belarus, Serbia and Kazakhstan to further strengthen the sales portfolio. "A comprehensive customer service network strengthens our competitiveness - especially in the increasingly important international market" says Nikolaus Jungbluth, Business Unit
The new Schaltbau GmbH website
Munich, 5 December 2012: The Schaltbau GmbH website has been given a complete makeover. Both the content and the layout have been fully revised, particularly focusing on the Products section. We have also introduced other new elements, such as a product configurator and the Markets section, which highlights selected Schaltbau GmbH products and how they are used in everyday life, illustrated with clear, descriptive pictures. The product configurator enables visitors