Improving the Life of Glass Bottle Manufacture Conveyor Chains

Summary
Wear protected glass bottle manufacture conveyor chains can be a valuable tool in improving productivity and reducing overall costs, especially in situations where pin head wear is a problem, or it is desirable to simplify chain guiding.

Such chains are available in a wide variety of widths and styles, so they can be fitted to almost any conveying system. For glass bottle manufacturers that would like to learn more, Ramsey’s technical sales staff can provide details about all aspects of chain selection and installation.

In most glass bottle manufacture environments, standard inverted tooth conveyor chains perform admirably and can deliver years of trouble-free service. However, in some situations, conveying chains can be exposed to conditions that create unusual wear, disrupt bottle transport and lead to premature chain failure.

Glass bottle producers that experience these problems can often realize significant productivity gains by replacing standard conveyor chains with the latest wear protected chains that are designed to reduce, or prevent, specific types of chain wear.

The Argument for Wear Protected Conveyor Chains
Typical conveying chains contain pins that are riveted, or headed, on the ends. Since these pin heads are exposed on both sides of the chain, they can be susceptible to several types of wear. They may rub against lateral guides or transfer plates, which can result in the gradual wearing of pin heads. Alternatively, the exposed pin heads may snag or hang up on any protruding edges along the conveyor’s path.

This snagging can lead to conveyor surging, glass breakage and the chipping or shearing away of the pin head. Once the pin head is worn away or sheared off, there is nothing holding the chain together and it will start to come apart. If that occurs, the conveyor will need to be shut down so the chain can be repaired or replaced.

Wear Protected Glass Manufacture Chain
Wear protected glass conveyor chains are designed to prolong chain life by guarding exposed pin heads against wear and by preventing chain snagging. There are a number of different chain designs that accomplish this.

One approach is to recess the pin head below the surface of a special link that is used on the side of the chain. This is the approach employed in Ramsey’s Allguard FX conveying chains - the pin head is completely below the surface of the link, where it is fully protected against abrasive wear and chipping.

The rounded contour of the links, with no exposed sharp edges, also reduces the possibility of link snagging on lateral guides.

Another method of protection utilizes special interlocking side links that not only guard against pin head wear but also greatly reduce the size of gaps between adjacent side plates. With smaller gaps between the links, the potential for snagging on lateral guides is significantly reduced. This is the design employed in Ramsey’s LifeGuard chains.

Each of these guarding methods is effective in preventing pin head wear and reducing chain snagging. Also, each method of pin head guarding can be built into one side or both sides of a chain, depending on the buyer’s preference.

When deciding which style is best for a particular application, it is most often a simple matter of customer preference; that being said, it is advisable to examine chain samples from the chain manufacturer and enquire about key details such as cost and availability.

Additional Options for Conveyor Chain
Wear protected conveying chains can be manufactured to accommodate a wide range of conveying systems. They are available in widths ranging from less than 1in to over 20in.
Chains can be assembled with all links, to maximize surface area, or they can be produced from links and spacers to reduce overall weight and enhance cooling. Links can also be double stacked within the chain to achieve better air flow and chain cooling.

Sprockets and Chains
Chains are also available to accommodate three different types of sprocket guiding: Multi guide, side guide and centre guide. For applications requiring an especially smooth conveying surface, the top of the conveyor chain may be ground and polished.

Resolving Problems
Although protected chains can resolve many problems, they are not the answer for every situation. Generally speaking, if a glassmaker is satisfied with the performance of a standard chain, there is little justification for incurring the added expense of wear protected chain.

If a conveyor chain is showing signs of excessive pin head wear or chipping, the first thing to do is to inspect the conveyor for loose guides or sharp edges that are damaging the chain. Alignment should also be verified. If these corrections have been made and the chain heads are still wearing, it is probably time to consider a protected chain.

Another reason to consider a wear protected chain is the potential for simplifying and reducing the cost of chain guides. Typical chains are often guided along the conveyor by ‘guide’ strips that are specially machined to support the chain while not making contact with the pin heads. Since wear protected chains have recessed pin heads, it is not necessary to machine special guide shapes. Instead, simpler, less costly, rectangular guides can be utilized.

Further Information
Ramsey Products, Belmont,
NC, USA
tel: +1 704 394 0322
email: sales@ramseychain.com
web: www.ramseychain.com

A Silent Chain (Inverted Tooth) and Sprocket Manufacturing Company that Specializes in Conveying, Glass Transport, and Power Transmission Applications. Products include Silent Chain, Wear Protected Chain, Duplex Chain and Take Out Arm Drives.

Mailing Address
Ramsey Products Corp.
PO Box 668827
Charlotte, NC 28266-8827, USA

Shipping Address
Ramsey Products Corp.
135 Performance Dr.
Belmont, NC 28012, USA

Main (704) 394-0322
Fax (704) 394-9134
http://www.ramseychain.com
Email address: sales@ramseychain.com

Media Contact: Kiki Tingas / 704-502-6102

This release was published on openPR.