Press release
Vacuum Blood Collection Tube Market 2019 Analysis - Research Covers Top 10 Players as Becton, Dickinson and Company, Sunphoria Co. Ltd., Narang Medical Limited, CML Biotech, Bio – X, Labtech Disposables, Etc
Global Vacuum Blood Collection Tube Market - OverviewThe global Vacuum Blood Collection Tube market is growing exponentially owing to rising prevalence of chronic respiratory disease and increasing usage of combination therapy are the major factor driving the Vacuum Blood Collection Tube Market. The global market for vacuum blood collection tube is expected grow at a CAGR of 7.5% over the forecasted period.
The vacuum blood collection system consists of a double-pointed needle, a plastic holder or adapter, and a series of vacuum tubes with rubber stoppers of various colours. A vacuum blood collection tube is evacuated to create a vacuum inside the tube facilitating the draw of a predetermined volume of liquid. Most commonly used to collect blood samples in venipuncture, they are also used as urine collection tubes and as serum separator tubes. Vacuum Blood Collection Tube tubes may contain additives designed to stabilize and preserve the specimen prior to analytical testing. Tubes are available with or without a safety-engineered closure, with a variety of labelling options and closure colours as well as a range of draw volumes.
Vacuum collection tubes are glass or plastic tubes sealed with a partial vacuum inside by rubber stoppers. The air pressure inside the tube is negative, less than the normal environment. After inserting the longer needle into the vein, the phlebotomist pushes the tube into the holder so that the shorter needle pierces the stopper. The difference in pressure between the inside of the tube and the vein causes blood to fill the tube. The tubes are available in various sizes for adult and paediatric phlebotomies.
Get Free Sample Report https://www.marketresearchfuture.com/sample_request/1371
For additives, different blood tests requires different types of blood specimens. Most tubes have additives called anticoagulants which prevent clotting/coagulation of the blood. Plastic tubes may have an additive to enhance clotting of the blood. The anticoagulants are already in the tubes in the precise amount needed to mix with the amount of blood that will fill the tube. The colour of the stopper on each tube indicates if any anticoagulant is present in the tube. It is important to completely fill each tube so that the proportion of blood to chemical additive is correct, otherwise, the test results may not be accurate or the specimen will be rejected and will need to be recollected. It is also important to thoroughly mix the blood with the additive by gentle inversion.
The vacuum blood collection tube market is growing at an exponential rate. The cross infection occurring due to blood transfusion, blood donation leads to spread of infectious diseases which is anticipated to increase the demand for these products.
Key Players for Global Vacuum Blood Collection Tube Market
Becton, Dickinson and Company, Sunphoria Co. Ltd., Narang Medical Limited, CML Biotech, Bio – X, Labtech Disposables, Hebei Xinle Sci &Tech Co., Ltd., Greiner Bio-One International, Biosigma, Medtronic plc., Terumo, and others are major players in vacuum blood collection tube market.
Global Vacuum Blood Collection Tube Market - Company Analysis
A vacuum blood collection tube is a sterile glass tube with a colored rubber stopper creating a vacuum seal inside of the tube which facilitate drawing predetermined volume of liquid, it is known as a Vacutainer. The vacutainer tubes were invented by Joseph Kleiner and Becton Dickinson in 1949. Vacutainer is a registered trademark of Becton Dickinson, which manufactures and sells the tubes ever since. The new gel vacuum tube seems to be an effective tool in the evacuated blood collection system due to its advantage in reduction of time in specimen processing.
Becton, Dickinson and Company (US), Sunphoria Co., Ltd. (Taiwan), Narang Medical Limited, CML Biotech, Bio – X, Labtech Disposables, Hebei Xinle Sci &Tech Co.,LTD (China), Sekisui Chemical Co. Ltd, HUMAN (US), Terumo (Japan), GBO, Medtronic (US), Sarstedt and others are some of the prominent players at the forefront of competition in the global Vacuum Blood Collection Tube market and are profiled in MRFR Analysis.
Get Prime Discount on Report at https://www.marketresearchfuture.com/check-discount/1371
Regional Analysis for Global Vacuum Blood Collection Tube Market
Depending on geographic region, Globally North America is the largest market for Vacuum Blood Collection Tube. The North American market for Vacuum Blood Collection Tube is expected to grow at a CAGR of 5.8% by the end of the forecasted period. These tubes may contain additional substances that preserve blood for processing in a medical laboratory. There is an increase in blood testing in these countries due to the prevalence new diseases.
Europe is expected to be the second-largest market for Vacuum Blood Collection Tube which is expected to grow at a CAGR of 6.5%. It is used for blood culture and not for laboratory analysis, special collection to detect bacteria growing in blood.
Asia pacific region is expected to be fastest growing region in Vacuum Blood Collection Tube market. Middle East & Africa is expected to have limited but steady growth in the market. These countries with the advancement of technology are expected to show large number of cases of infections and other hospital acquired disease which remain unnoticed currently.
Some Brief Table of Contents of Report
Chapter 1. Report Prologue
Chapter 2. Market Introduction
2.1 Definition
2.2 Scope Of The Study
2.2.1 Research Objective
2.2.2 Assumptions
2.2.3 Limitations
Chapter 3. Research Methodology
3.1 Introduction
3.2 Primary Research
3.3 Secondary Research
3.4 Market Size Estimation
Chapter 4. Market Dynamics
4.1 Drivers
4.2 Restrains
4.3 Opportunities
4.4 Challenges
4.5 Macroeconomic Indicators
4.6 Technology Trends & Assessment
Chapter 5. Market Factor Analysis
5.1 Porters Five Forces Analysis
5.1.1 Bargaining Power Of Suppliers
TOC Continued…
Do You Have Specific Requirement? Ask To Our Experts at https://www.marketresearchfuture.com/enquiry/1371
About Market Research Future:
At Market Research Future (MRFR), we enable our customers to unravel the complexity of various industries through our Cooked Research Report (CRR), Half-Cooked Research Reports (HCRR), Statistical Report, Continuous-Feed Research (CFR), and Market Research & Consulting Services.
Contact Us:
Market Research Future
Office No. 528, Amanora Chambers
Magarpatta Road, Hadapsar,
Pune - 411028
Maharashtra, India
Phone: +1 646 845 9312
Email: sales@marketresearchfuture.com
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Vacuum Blood Collection Tube Market 2019 Analysis - Research Covers Top 10 Players as Becton, Dickinson and Company, Sunphoria Co. Ltd., Narang Medical Limited, CML Biotech, Bio – X, Labtech Disposables, Etc here
News-ID: 1498461 • Views: …
More Releases from Market Research Future

Global Small Boat Industry Sees Growing Demand Amid Rising Recreational Boating …
As per the latest analysis by Market Research Future, the Small Boats Market Size was estimated at 17.12 (USD Billion) in 2024. The Small Boats Market Industry is expected to grow from 17.88 (USD Billion) in 2025 to 26.41 (USD Billion) till 2034, at a CAGR (growth rate) is expected to be around 4.43% during the forecast period (2025 - 2034).
The global small boat industry is witnessing significant growth, driven…

Automotive Trim Market Attaining USD 193.22 Billion till 2034 | Innovations Rede …
As per the latest analysis by Market Research Future, the Automotive Trim Market Size was estimated at 140.30 (USD Billion) in 2024. The Automotive Trim Market Industry is expected to grow from 144.87 (USD Billion) in 2025 to 193.22 (USD Billion) till 2034, at a CAGR (growth rate) is expected to be around 3.25% during the forecast period (2025 - 2034).
The automotive industry is witnessing a significant transformation in vehicle…

Leading Automotive Technology Firms Expand Fuel Level Sensor Solutions for Next- …
As per the latest analysis by Market Research Future, Automotive Fuel Level Sensor Market Size was valued at USD 5,788.04 million in 2024. The Automotive Fuel Level Sensor market industry is projected to grow from USD 6,008.32 million in 2025 to USD 9,201.90 million by 2035, exhibiting a compound annual growth rate (CAGR) of 4.35% during the forecast period (2024 - 2035).
With the global automotive industry focused on precision,…

Valet Parking Technology Gains Momentum as Urban Mobility and Smart Infrastructu …
As per the latest analysis by Market Research Future, the Valet Parking Technology Market Size was estimated at 1.41 (USD Billion) in 2024. The Valet Parking Technology Market Industry is expected to grow from 1.63 (USD Billion) in 2025 to 6.01 (USD Billion) till 2034, at a CAGR (growth rate) is expected to be around 15.62% during the forecast period (2025 - 2034).
Valet parking technology is emerging as a transformative…
More Releases for Vacuum
Semiconductor Screw Vacuum Pump Market Industry Trends - Atlas Copco (Edwards Va …
MarketQuest.biz proclaims the addition of another new report titled Global Semiconductor Screw Vacuum Pump Market which is a well-synchronized synopsis of the market. The report offers broad insights extracted by thoroughly analyzing historical and current developments in the market. The report outlines the distinguishable players in the global Semiconductor Screw Vacuum Pump market with a clear-cut end goal to give an intelligent standpoint of the forces of the market, while…
Roots Vacuum Pumps Market SWOT Analysis by Key Players: Pfeiffer, Leybold, ANLET …
Roots vacuum pumps, or vacuum boosters, are dry vacuum pumps that are used together with backing pumps in a wide range of applications where large pumping speeds are required. Vacuum boosters operate completely contact-free and without sealing fluids such as oil or water in the working chamber, although with most models the two gearwheels of the synchromesh gearing and the bearings for the impeller shafts are lubricated with oil. Some…
Vacuum Coating Machines Market 2018 Global Key Country Analysis: Denton Vacuum, …
Vendor Landscape
Tetra Technologies, Inc., (U.S.), BP P.L.C. (U.K.), Statoil ASA (Norway), DNV GL (Norway), TechnipFMC PLC (U.K.), AF Gruppen ASA (Norway), Ramboll Group A/S (Denmark), and Aker Solutions ASA (Norway) are some of the key companies operating in the market. Amec Foster Wheeler (U.K.), John Wood Group Plc. (Scotland), Claxton Engineering Services (U.K.), Allseas group SA (Switzerland), and DeepOcean Group (Netherlands) among others.
Market Research Future’s (MRFR) latest study reveals that…
Global Rotary Vane Vacuum Pumps Market- Pfeiffer Vacuum, Tuthill, Osaka Vacuum, …
Global Rotary Vane Vacuum Pumps Market report 2017 is an in-depth research on the current situation of the Rotary Vane Vacuum Pumps industry.
The Scope of the Rotary Vane Vacuum Pumps research report:
The Global Rotary Vane Vacuum Pumps Market primarily includes a basic overview of the Rotary Vane Vacuum Pumps industry. It also includes Rotary Vane Vacuum Pumps definitions, classifications and applications. It segments the market by applications, types, regions, competitive…
Metallurgical High Vacuum Announces High Vacuum Newsletter
Fennville, MI---Metallurgical High Vacuum has created a new “High Vacuum News” to provide heat treat industry professionals with tips and hints to keep their vacuum pumps running strong.
As Geoff Humberstone, MHV President, comments: “This year marks 30 years for us as Metallurgical High Vacuum. Back in 1981, I saw the need for vacuum design and consulting and started the company. Within four years we added pump remanufacturing because we…
Metallurgical High Vacuum Ships Vacuum Chambers (Corrected)
Special Designs are Built to Customer Specifications
Fennville, MI--- Metallurgical High Vacuum recently shipped two chambers for customer-specific applications. One vacuum chamber is over 72” high and will be used in P E. Chemical Vapor Deposition. The other chamber is a 12-inch square design that will be used to weld silicon sticks, complete with a two-stage booster vacuum pumping system. Both chambers are built of type 304 stainless steel for…