openPR Logo
Press release

HALCON 10 Distributor Training in Munich

10-05-2010 10:08 AM CET | IT, New Media & Software

Press release from: MVTec Software GmbH

Participants of the HALCON 10 Distributor Training in Munich

Participants of the HALCON 10 Distributor Training in Munich

Regarding the launch of the new version 10 of their machine vision software HALCON, MVTec Software GmbH held an international distributor training in Munich, Germany, from September 27 to October 01, 2010. HALCON 10 will be available via MVTec’s global distribution network from October 10, 2010.

50 sales engineers from 20 countries over the world took part in this event. In North America, a separate distributor training will take place. Topics of the Munich event were the focused training in the comprehensive innovations of HALCON 10 as there are new matching technologies, enhancements of 3D vision methods, considerable speedups, and the enhanced usability of HALCON 10.
The goal of the training was not only to acquaint the distributing engineers with the new product, but moreover to further strengthen the family of Halconists around the world.

MVTec cooperates with distribution companies that represent machine vision at the highest stage in their particular country. HALCON is steadily evolved by MVTec and employed by the industry in all sorts of machine vision applications.

About HALCON
HALCON is the comprehensive standard software for machine vision with an integrated development environment (IDE) that is used worldwide. It leads to cost savings and improved time to market: HALCON’s flexible architecture facilitates rapid development of machine vision, medical imaging, and image analysis applications. HALCON provides outstanding performance and a comprehensive support of multi-core platforms, MMX and SSE2, as well as GPU acceleration. It serves all industries with a library of more than 1600 operators for blob analysis, morphology, matching, measuring, identification, and 3D vision, to name just a few. HALCON secures your investment by supporting a wide range of operating systems and providing interfaces to hundreds of industrial cameras and frame grabbers, including GenICam, GigE Vision, and IIDC 1394. More information: www.halcon.com

HALCON 10 at the VISION, Stuttgart: hall 4, booth 4C55 (MVTec)

About MVTec
MVTec is a leading manufacturer of standard software for machine vision. MVTec products are used in all demanding areas of imaging: Semi-conductor industry, web inspection, quality control and inspection applications in general, medicine, 3D vision, and surveillance. MVTec has more than 30 established distributors, located throughout Europe, North and South America, Australia, and Asia (China, Japan, Korea, India et al.). In addition, MVTec, LLC works out of Boston, MA (USA), to better attend the North American market since 2007. For more information refer to www.mvtec.com

Contact:
Dr. Lutz Kreutzer, Manager PR & Marketing | MVTec Software GmbH, Neherstr.1, D-81675 München
Tel. +49 89 457695-0 | Fax +49 89 457695-55 | www.mvtec.com | press@mvtec.com

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release HALCON 10 Distributor Training in Munich here

News-ID: 146736 • Views: 1229

More Releases from MVTec Software GmbH

New HALCON Training Partner in Southern Germany
The Imaging Source Europe GmbH, long-standing partner of MVTec Software GmbH, extends the support and distribution activities in Southern Germany and becomes “MVTec Certified Training Partner”. MVTec’s distributor The Imaging Source strengthens the support and distribution activities of the machine vision software HALCON with their new sales office in Gernlinden near Munich, Germany. The Imaging Source is now part of the MVTec “Certified Training Partner” program, qualifying the employees to
MVTec Introduces MERLIC – A New Generation of Vision Software
Munich, Germany - MVTec Software GmbH is pleased to introduce MERLIC, a new, all-in-one machine vision software product that enables users to quickly build complete solutions without programming. MERLIC offers a radically new user experience with novel interaction concepts, an image-centered user interface, and many easy-to-use tools. To keep up with the growing world-wide demand for machine vision technology, machine makers reduce development time by increasing productivity and efficiency of their
MVTec Presents HALCON USB3 Vision Interface and 3D Vision Technology
As of now, the new universal HALCON image acquisition interface for USB3 Vision is available. This interface will be presented by MVTec in a live demo at the SPS IPS DRIVES in November 2013 in Nuremberg. Furthermore, MVTec will showcase the 3D vision technology of HALCON 11. Key benefits of the new USB3 Vision Standard are the high bandwidth in excess of 350 MB/s and an easy-to-use plug and play
HALCON Helps Best Swimmers of the World
At the 15th FINA World Swimming Championships 2013 in Barcelona, Spain, a sophisticated vision system is applied to analyze the swimmers’ performances. This system was designed by STT Ingenieríy y Sistemas, San Sebastian (Spain), based on the vision software HALCON by MVTec (Munich, Germany). Coaches and athletes are always interested in improving their athletic performances. As in any sport, it is important for swimmers to study their technique. For this purpose,

All 5 Releases


More Releases for HALCON

MVTec Announces HALCON 11
MVTec Software GmbH (Munich, Germany), manufacturer of standard software for machine vision, announces the release of the new version HALCON 11 for June 1, 2012. For machine vision users, HALCON 11 provides many innovations and enhancements. As a unique feature, HALCON 11 presents the “Sample-based Identification”. With this innovative technology, trained objects can be recognized only by characteristic features like color or texture, thereby eliminating the need to use bar codes
HALCON Embedded on OMAP4
MVTec Software GmbH, Munich (Germany) has expanded its series of HALCON Embedded versions with the release of HALCON Embedded for OMAP4 processors. With this release, the entire HALCON functionality is available for OMAP4 processors without additional porting effort. The OMAP4 processor by Texas Instruments was especially designed for mobile devices like tablets or smart phones. Its performance is comparable to the Intel Atom processor, but the OMAP4 consumes less power. The
HALCON flies with NASA-Robot into Space
At the end of November 2010, the first humanoid robot astronaut flied into space, the Robonaut 2 (R2) which was jointly developed by the NASA and General Motors. R2 takes its visual decisions with the imaging software HALCON by MVTec (Munich, Germany). The Discovery will be launched as mission STS-133 to its very last space flight. Destination of this shuttle mission is the international space station ISS. On board of the
MVTec Announces HALCON 10
MVTec Software GmbH (Munich, Germany), manufacturer of standard software for machine vision, announces the release date of the new version HALCON 10 for 10/10/10. HALCON 10 will provide many great innovations for all machine vision users. HALCON is the comprehensive standard software with an integrated development environment (IDE) for machine vision that is used worldwide. The new version HALCON 10 will further extend 3D vision and matching technology, and will again
HALCON User Conference in Japan
On the occasion of the ten years long cooperation of MVTec (Munich, Germany) and its exclusive distributor in Japan, LinX (Yokohama), on January 30 2007, an international user conference took place in Yokohama. German and Japanese companies with international standing presented how they implemented their machine vision applications for production processes by means of HALCON. More than 300 decision makers and engineers from Germany, Japan, and other Asian countries came to
HALCON runs on Windows Vista
The software library HALCON for machine vision from MVTec can be employed offhand on Microsoft’s Windows Vista. As a market leader for machine vision software, MVTec Software GmbH, Munich, Germany, has already tested the current release 7.1.2 of HALCON on the new Vista platform at an early stage. Now with the launch of Windows Vista, MVTec’s established reliable HALCON library is available for all Windows users without any adaptation. More information http://www.halcon.com http://www.mvtec.com About HALCON: HALCON