Major Companies formed IP500 Alliance
DORMA, Gunnebo, JOB detectomat, Honeywell, LINK, SimonVoss, STG Beikirch, Swissphone, UTC, WAGO and more OEMs have now finalized the formation of an association (official Alliance) to drive interoperability and easy installation of smart devices in building automation applications based on IPv6. Key elements of the IP500 solution as the rising wireless standard for low-power smart sensor devices (internet of things and smart objects) is focused on providing highest reliability by a "hybrid mesh network" and longest battery life time due to most efficient and leanest mesh network IPv6 topology.
The IP500 solution combines protocol standards like BACnet for building automation with backwards compatibility to an installed base of wireless sensors using FSK modulation. The IP500 Alliance has chosen suppliers like Semtech to provide an 802.15.4 2006 / IC with pin compatibility and therefore guarantee second source availability, supporting the 868/915 MHz for Europe and USA, bands 780+MHz for China and 900+ MHz for Japan and Korea. For the NWL and protocol stack the Alliance has chosen key suppliers like Meshnex to support full interoperability, the highest IP based wireless mesh NWL efficiency and protocol stack.
The IP500 Alliance members focus on developing smart devices like smoke detectors, intrusion sensors, entrance control systems and other security products which will provide customers with solutions that are cost-effective, easy to install and highly reliable. The IP500 solution focuses on being the first wireless based mesh network for smart low power which supports the EN (European) regulations and critical local regulations for security and fire.
At the moment the Alliance consists of over 11 member companies and is rapidly growing. The IP500 solution will be embedded in building automation, commercial building and other sensor applications. The "IP connectivity of things" will provide end-users with the freedom, flexibility, and convenience of the standards-based world without wires.
"Honeywell is a global leading provider of smart devices and solutions in the related segment - the IP500 Alliance provides us the future IP based platform / standards that address(es) the need(s) of our customers in commercial, industrial and residential markets. We are proud to have been one of the founding members of the IP500 Alliance.”, shares Marc Boebé, Key Account Manager, Honeywell Esser fire detection solutions (www.Honeywell.com)
Helmut Adamski, CEO of Swissphone explains that, "The IP500 standard solution will allow us to seize business opportunities in defined high potential market segments, where interoperation of various smart devices is essential. Still today, OEMs struggle with their own proprietary low power network solutions, on one side, and currently available standard solutions do not provide the right performance on the other side. Due to the IP based connectivity approach and the second source strategy of the IP500 Alliance, OEMs will have more freedom and opportunities for their business approach." (www.swissphone.com)
"We as LINK GmbH believe that there will be a future wireless standard, which is open and IP-based for commercial installations. That allows the reuse of existing IT-resources and existing Know-How, rather then to introduce fundamental new wireless technologies for users, service companies and manufacturers. An open standard agreed by OEM companies will build the bases for the interoperability of different devices and will support the interoperability as well as the ability to build end-to-end workflows for individual building scenarios. As IP500 adresses all relevant topics, we believe IP500 will play a strong role in the building automation and management environment." commented Markus Link, MD of the LINK GmbH (www.link-gmbh.com).
“As one of the lead promoters of the Alliance, UTC / GE Security recognizes the real market and growth opportunity for IP based smart sensor applications using IPv6 based mesh technology,” said Bart Petit, Product Manager Introction UTC / GE Security (www.gesecurity.net).
… if some other OEMs would like to participate.
The IP500 Alliance is an open and international association formed by OEMs and system manufacturers to establish a standardized open meshed wireless sensor and actuator network. It is focussing mainly on large commercial and enterprise building and process automation applications and provides high reliability, interoperability and Ultra low-power consumption. By this definition, the IP500 Alliance is fully driven by OEMs, their applications and market segments to enable business opportunities in large projects, supported by the common wireless platform for sensor devices. With approved suppliers, it provides a 100% fully interoperable and compatible second source at the IC, NWL and application level.
The IP500 membership is driven by industry leaders from across the entire spectrum of leading product and system solution for Access Control, Fire and Smoke Detection, Escape route systems, Intrusion Detection, Lighting and Climate Control, Messaging and Localization and many other solutions.
Since May 2010 IP500 is an association under German law with Headquarter in Berlin.
IP500 Alliance e. V.
Mr. Lyn Matten, General Manager
Phone: +49 (0) 30 85 97 77 97
Fax: +49 (0) 30 89 63 15 04
This release was published on openPR.
Permanent link to this press release:
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Major Companies formed IP500 Alliance here
News-ID: 146332 • Views: 2332
More Releases for OEM
Technological Advancements Driving Automotive OEM Coatings Market
The global automotive original equipment manufacturers (OEM) coatings market attained a value of $10,997.4 million in 2018 and is predicted to reach a value of $13,661.4 million by 2024, registering a 4.2% CAGR during the forecast period (2019-2024). The market is growing because of the growth potential of automotive industry in emerging economies and technological advancements. Paints that are used on automobiles for protection and decoration purposes are referred to
UniStrong Is Now a 42Gears OEM Partner
42Gears Mobility Systems, a leading Unified Endpoint Management (UEM) player announces that it has onboarded UniStrong as an OEM partner. UniStrong is a renowned provider of high-precision products, rugged devices and services for the Global Geospatial Industry. The partnership will help UniStrong integrate their rugged devices with 42Gears’s suite of products to deliver best-in-class mobility management ready rugged computing solutions. UniStrong rugged devices are routinely used in the GIS,
Humidity Measurement Module for OEM Applications
The EE1900 humidity module from E+E Elektronik is optimised for the measurement of relative humidity (RH) or dew point temperature (Td) in climate and test chambers. With outstanding temperature compensation across the working range from -70 °C to 180 °C (-94 °F to 356 °F) and the choice of stainless steel and plastic probes, the module is suitable for a wide range of applications. High Accuracy in Harsh Environment The excellent
Global OEM Insulation Market Analysis with Trends and Operational Strategies
Qyresearchreports include new market research report Global OEM Insulation Market Research Report 2018 to its huge collection of research reports. In this report, the global OEM Insulation market is valued at USD XX million in 2017 and is expected to reach USD XX million by the end of 2025, growing at a CAGR of XX% between 2017 and 2025. The global OEM Insulation market is expanding on account of various factors which
Unicon Software and VXL Instruments signing OEM-partnership agreement
The German company Unicon Software welcomes VXL Instruments as its latest OEM-partner. Unicon’s software solutions eLux and Scout Enterprise will now also be available as built-in version especially on VXL’s D- and MD-series. VXL Instruments was established in 1976 and is a global leader in cloud computing access devices such as Thin Clients. Through technology partnerships with Citrix or VMware, VXL is committed to deliver innovative solutions to its customers. VXL’s
Adyton Systems announces OEM partnership with Symantec
Adyton Systems strengthens its next-generation firewall with the integration of Symantecs’ RuleSpace in its security application. Leipzig, Germany, July 3, 2012. Adyton Systems announced a new global OEM partnership with Symantec. This will enable Adyton Systems to equip its next-generation firewall NETWORK PROTECTOR with additional functionality for Internet security. Using Symantec’s URL filter RuleSpace, Internet content will be scanned and compared against the RuleSpace database. This allows suspicious websites to be