Sleeves for pinch valves by AKO work precisely and reliably

Trebur, 24nd of July, 2010 – The AKO Armaturen & Separations GmbH, specialist for the production of squeeze valves, manufactures different valves and accessories for the industrial application and is located near Frankfurt a. M. (Germany). By the many-sided usability of the high-quality valves AKO has asserted itself to this day as a European market leader for squeeze valves. By consistent and innovative research and development the company can offer his products for almost every industrial area and allows a reliable and sure use by their customers.

The specialization of AKO in the development and manufacture of pneumatic and mechanical squeeze valves also provides for a high technical quality in the production of the sleeves for pinch valves. The sleeve is the heart of every valve and must be able to fulfill special requirements. A sleeve is made from different materials depending on which medium should be barred, regulated or measured. Different elastomers are used according to the implementation of the valve. They are produced either by a conventional injection procedure, by manual wrapping methods or also by hand packaging. The sleeve ideally has to fit to the squeeze valve, because its construction owns an essential influence on the closing and opening mechanism. Consequently, the quality of the sleeve is decisively responsible for the stand time of the whole squeeze valve. Hence, AKO maintain a very high standard of best quality products to keep the maintenance costs for the customer as low as possible, e.g. by offering the utmost level of information on http://www.pinch-valve.com/en/home.html on each single product and the exchange of the different sleeves. This process is practicably steerable directly by the customer and so the down-times can be strongly reduced in case of emergency. All sleeves can be found under http://www.pinch-valve.com/en/products/sleeves-for-pinch-valves.html .

AKO Armaturen & Separations GmbH produces industrial valves and in addition suitable sleeves in various series. Besides, individual customer requests can also be answered to at any time, because AKO can manufacture many components beyond the serial production. The company was already set up in 1984 with the production of squeeze valves and nowadays there are even two subsidiaries in France and England besides the German company headquarters. Today the family enterprise, managed by Antoine and Frederic Kopp, sells its valves and sleeves all over the world.

AKO Armaturen & Separations GmbH
Adam-Opel-Straße 5
D-65468 Trebur-Astheim

Telefon: +49 (0) 6147 9159 0
Fax: +49 (0) 6147 9159 59

E-Mail: ako@ako-armaturen.de
Web: www.pinch-valve.com

This release was published on openPR.