Dew Point Measurement Module for High Humidity Applications
Optimized for High-Humidity Conditions
The EE1950 employs the innovative, heated E+E humidity and temperature sensing element HMC01, which shows best long-term stability even at continuous high relative humidity. Besides, the proprietary E+E coating protects the sensing element from dust, dirt and corrosion. This improves significantly the measurement performance in harsh environment.
Precise Calculation of Relative Humidity
Together with an additional, external temperature sensor, the EE1950 allows for precise calculation of the relative humidity. It is therefore a perfect solution for climatic chamber control.
High Resistance to Chemical Contamination
Thanks to the Automatic Sensor Recovery (ARC) function, the sensor copes well with chemical contamination. By controlled heating, the chemicals gaze out from the sensing element, which improves the long-term stability and service life of the device. The ARC mode can be triggered either via a push button on the board or an electrical signal.
User-Friendly Configuration and Adjustment
The dew point measured data is available on the analogue output, which can be set to current or voltage with a slide switch. The output scaling and adjustment can be easily performed via the service interface and the free EE-PCS configuration software.
The choice of two board sizes (55 x 46.5 mm / 2.17 x 1.83 ʺ or 90 x 70 mm / 3.54 x 2.36 ʺ) and the high-quality, flexible probe cable facilitate the design-in of the EE1950. The stainless steel probe is available in 65 mm (2.56 ʺ) and 200 mm (7.84 ʺ) length.
E+E Elektronik develops and manufactures sensors and transmitters for humidity, temperature, dew point, moisture in oil, air velocity, flow and CO2. Data loggers, hand-held measuring devices and calibration systems complete the comprehensive product portfolio of the Austrian sensor specialist. The main applications for E+E products lie in HVAC, building automation, industrial process control and the automotive industry. A certified quality management system according to ISO 9001 and IATF 16949 ensures the highest quality standards. E+E Elektronik has a worldwide dealership network and representative offices in Germany, France, Italy, Korea, China and the United States. The accredited E+E calibration laboratory (OEKD) has been commissioned by the Austrian Federal Office for Metrology (BEV) to provide the national standards for humidity and air velocity.
E+E Elektronik Ges.m.b.H
T: +43 (0) 7235 605-0
F: +43 (0) 7235 605-8
Mr. Johannes Fraundorfer
T: +43 (0)7235 605-217
This release was published on openPR.
Permanent link to this press release:
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Dew Point Measurement Module for High Humidity Applications here
News-ID: 1392337 • Views: 265
More Releases from E+E Elektronik Ges.m.b.H.
New CO2 Sensor for Railway Applications
The EE8915 from E+E Elektronik meets all relevant railway standards for reliable CO2 measurement in railway vehicles, e.g. in the passenger compartment or driver's cab. On-board sensors ensure high CO2 measurement accuracy independently of temperature, altitude or weather conditions. Due to excellent measurement performance in harsh environment, the sensor is also suitable for demanding process and climate control. Long-Term Stable CO2 Measurement The E+E NDIR dual wavelength infrared measuring principle is particularly
Digital CO2, Humidity and Temperature Sensor
The EE850 duct mount sensor from E+E Elektronik combines the CO2, relative humidity (RH) and temperature (T) measurement in a single device. The sensor can be easily integrated into a bus system via the RS485 interface (Modbus RTU or BACnet MS/TP). The 3-in-1 device is dedicated for building automation as well as for demanding process control. The EE850 features the E+E dual wavelength NDIR CO2 sensing cell, which is particularly insensitive
Humidity Transmitters with Stainless Steel Enclosure
The high-end EE310 and EE360 industrial transmitters from E+E Elektronik are now available with stainless steel or with polycarbonate enclosure. The EE310 humidity and temperature transmitter is dedicated for demanding industrial processes control. The EE360 measures the moisture content of industrial oils and thus enables predictive maintenance of machines and plants. Display with Data Logger Function Both devices feature an optional 3.5" TFT color display, which offers an optimal view
Laminar Flow Sensor with Digital Output
The EE660 from E+E Elektronik measures accurately very low air velocity. It is ideal for laminar flow monitoring and clean room applications. The transmitter is now also available with an RS485 interface. The EE660 is suitable for accurate measurement of very low air velocity down to 0.15 m/s (30 ft/min). It features an E+E hot film sensing element, which offers excellent long-term stability and short response time. Furthermore, the sensing element