Key Foresights on How Surface Mining Market will Evolve During 2014 - 2020
Factors such as lower injury rates, better recovery, flexibility and grade control serve as drivers for the global surface mining industry. However, from an environmental perspective, surface mining tends to have an extensive and more prominent impact on the surrounding environment as compared to underground mining. This is a disadvantage for the global surface mining industry. Hence, to counter this environmental impact associated with the surface mining operations, a safety zone needs to be placed around the mining area. Another disadvantage associated with the global surface mining industry is the relatively higher transport cost involved during the mining operation. For instance, the transportation cost of rock in open pit mining method accounts for about 50% of the total operating cost. Supporting regulations for surface mining such as the Surface Mining Control and Reclamation Act, 1977 in the US, and proper economic planning alongwith the establishment of safety zone near the mine surface have been introduced in recent times. These developments, the vast horizontal and low lying reserves and the surging demand of iron-ore, diamond, chromium and coal, will act as opportunistic factors for the global surface mining market.
Request For Report Sample @ https://www.futuremarketinsights.com/reports/sample/rep-gb-61
Market segmentation of surface mining can be done on the basis of mining methods, the type of mineral deposits and regions. On the basis of mining methods, the global surface mining can be categorised into 3 groups: strip mining, terrace mining and open-pit mining. Among these, strip mining is applied where both the surface of the ground and the ore body are relatively horizontal with a minimal depth under the surface. An example of strip mining is the coal mining operation at Mpumalanga. Terrace mining is opted for where the overlying layer is relatively thicker or the ore incline is too steep. Terrace mining is a multi-step method in which the entire mine moves over the ore reserve from one end to another. This type of mining is prevalent in Germany-based lignite mines, and in some of the coal mines in the UK and South Africa. Open-pit mining refers to the traditional cone-shaped excavation with a typical vein structure, and steeply dipping and stratified ores. This mining method is primarily used for the excavation of metals such as Sishen iron-ore and Palabora copper ore. However, at some places open-pit mining can also be used for the excavation of other types of deposits such as diamond ore at Finsch.
On the basis of the type of mineral deposits, surface mining can be categorised as stratified and non-stratified. Stratified surface mining can be further sub-divided into horizontal and inclined. Non-stratified is divided into vertical vein, and massive stockwork or pipe.
On the basis of region, the global surface mining market includes North America, Latin America, Asia Pacific, Japan, Western Europe, Eastern Europe, and Middle East & Africa. Among these, surface mining is mostly prevalent in North America, followed by Latin America, Asia Pacific, and Middle East & Africa. Surface mining accounts for about 85% of the overall mineral exploitation in the US. The major countries using surface mining include the US, Canada, Mexico, Peru, India, China, Chile, Brazil, Indonesia, Ukraine, Angola and Australia.
Some of the prominent players of the global surface mining market include: Goldcorp, Teck, Rio Tinto, BHP Billiton, Vale S A, Freeport-McMoran, Barrick Gold and others. With the adoption of safety measures, economical techniques and support from governmental legislations, the mining companies are expected to witness further positive growth, thereby contributing to a sustainable positive future for the global surface mining market.
The research report presents a comprehensive assessment of the market and contains thoughtful insights, facts, historical data, and statistically supported and industry-validated market data.It also contains projections usinga suitable set of assumptions and methodologies. The research report provides analysis and information according to categories such as market segments, geographies, types, technology and applications.
Request For Report Table of Content (TOC): https://www.futuremarketinsights.com/toc/rep-gb-61
The report covers exhaustive analysis on:
Supply & Demand
Competition & Companies involved
Future Market Insights is the premier provider of market intelligence and consulting services, serving clients in over 150 countries. FMI is headquartered in London, the global financial capital, and has delivery centers in the U.S. and India.
FMI’s research and consulting services help businesses around the globe navigate the challenges in a rapidly evolving marketplace with confidence and clarity. Our customized and syndicated market research reports deliver actionable insights that drive sustainable growth. We continuously track emerging trends and events in a broad range of end industries to ensure our clients prepare for the evolving needs of their consumers.
616 Corporate Way, Suite 2-9018,
Valley Cottage, NY 10989,
This release was published on openPR.
Permanent link to this press release:
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Key Foresights on How Surface Mining Market will Evolve During 2014 - 2020 here
News-ID: 1341555 • Views: 240
More Releases from Future Market Insights
How Changing Dynamics of Cable Testing Market are Reflecting on Growth Strategie …
Global Cable Testing Market: Introduction The cost of the substitution of cables that are concealed is very high. Faults in the cable, bending, kinking, and crushing, are not always visible, which has created the requirement for cable testing. Thus, cable testing helps check the cable functionality, cable quality, and cable conformity. Several times, cable testing by visual inspection is an effective way of identifying the actual problem before it causes any
How Transformative Trends in Self-Organising Network Market are Molding Strategi …
Self-Organising Network: Introduction With accelerated advancements and increasing complexities in the radio network technologies, such as those utilised for the development of LTE and 5G networks, which are used for planning, management, configuration, healing and optimisation, are required to be automated to facilitate efficiency. At present, suppliers are offering self-organising networks that possess the ability to offer optimum performance. Self-organising networks are use cases that perform network governance, including network planning,
Mining Vehicle AC Kits Market: Exploring the Impact of Trends on Strategies of K …
Mining Vehicle AC Kits Market: Introduction Cabin space in mining equipment has become more sophisticated in the recent past. The installation of mining vehicle AC kits has evolved from an optional feature to a necessary feature. Mining equipment manufacturers have made advancements in technology related to efficiency, performance and cost of air conditioning systems in order to make them affordable and economical to enable low-budget and compact installations without compromising on
Key Factors to Fuel Growth of the Talent Acquisition & Staffing Technology and S …
With the growing importance of recruiting and retaining top talent effectively and efficiently, smart hiring processes are the need of the hour. It is about time organisations move beyond merely scrutinising resumes. Salaries and benefits are important factors, but adopting ways that would make candidates an important part of the hiring process will attract the best talent. Studies reveal that due to discrepancies in existing Applicant Tracking Systems (ATS), hiring
More Releases for Surface
2019 Surface Protection Service Market: Leading Players – Surface Shields, Sur …
The Surface Protection Service report offers a comprehensive evaluation of the market. It does so via in-depth qualitative insights, historical data, and verifiable projections about market size. The projections featured in the report have been derived using proven research methodologies and assumptions. By doing so, the research report serves as a repository of analysis and information for every facet of the market. In addition, this report discusses the key drivers influencing
Global Surface Mount Switch Market Insights, Forecast
The Surface Mount Switch market was valued at Million US$ in 2017 and is projected to reach Million US$ by 2025, at a CAGR of during the forecast period. In this study, 2017 has been considered as the base year and 2018 to 2025 as the forecast period to estimate the market size for Surface Mount Switch. Get sample copy of the report: https://www.marketdensity.com/contact?ref=Sample&reportid=53417 Table of Contents: Table of Contents 1 Study Coverage
Global Surface Computing Market
Global Surface Computing Market was valued at US$ 12.41 Bn in 2017 and is expected to reach US$ 131.49 Bn by 2026, at a CAGR of 34.32% during a forecast period. Surface computing is a multi-user and multi-touch technology, which enables interaction with the aid of natural gestures, touch, and physical objects. Surface computing systems are known as tabletop computers, are likely to be the future of the desktop. The objective of
Surface Roughness and Contour Measurement Market
https://www.qandqmarketresearch.com/reports/7185891/surface-roughnesscontour-measurement-market-1 This report presents the worldwide Surface Roughness and Contour Measurement market size value, production and consumption, splits the breakdown data status 20132018 and forecast to 2025, by manufacturers, region, type and application. This study also analyzes the market status, market share, growth rate, future trends, market drivers, opportunities and challenges, risks and entry barriers, sales channels, distributors and Porters Five Forces Analysis. The Surface Roughness and Contour Measurement market was valued at
2017 Research Surface Transportation Global Report
"Global Surface Transportation Market Research Report 2017" The Report covers current Industries Trends, Worldwide Analysis, Global Forecast, Review, Share, Size, Growth, Effect. . . Description- '
Global Surface Disinfectant Market Report, 2024
“Global Surface Disinfectant Market” By Product (Hypochlorite, Quaternary Ammonium Compounds, Hydrogen Peroxide, Chlorhexidine Gluconate, Peracetic Acid, Phenol, Alcohol), Formulation (Sprays, Liquids, Wipes), Geography (North America, Europe, Asia-Pacific, Europe, South America, Middle East and Africa) – Industry Trends and Forecast to 2024 Report Analysis The Global Surface Disinfectant Market accounted to USD 349.7 billion in 2016 growing at a CAGR of 11.90% during the forecast period of 2017 to 2024. The upcoming