Automotive Brake Caliper Market 2018 Key Players Continental, Akebono, Brembo, Mando Corporation, Apec Braking, ZF Friedrichshafen, Robert Bosch, Budweg, WABCO, Brakes International, AlDelco

Market Overview:-

Global Automotive Brake Caliper Market from PCVs are expected to account for highest revenue share, crossing 60% by 2024. Their proliferating production along with mandatory installation of brake calipers will primarily contribute towards the industry expansion. Moreover, increasing consumer expenditure has resulted in improved PCV sales, further supporting the industry dominance. Two-wheelers are likely to grow rapidly over the forecast timeframe owing to their substantial production, particularly in emerging economies.

Automotive brake caliper market from steel is likely to account for highest share of more than 40% over the forecast timeframe owing to enhanced mechanical properties such as durability, stiffness, and high corrosion resistance. These properties have led to the shifting preference of manufacturers towards the material. Moreover, the material offers cost effectiveness when compared to the counterparts, further supporting the industry dominance. Phenolics will witness steady growth of over 3.5% from 2017 to 2024 owing to provision of the benefits such as light weight and high strength.

Request For Sample Copy Of This Report @ https://www.gminsights.com/request-sample/detail/2336

Top Key Players:-

The key players of global Automotive Brake Caliper Market are AlDelco, Continental, Akebono, Brembo, Mando Corporation, Apec Braking, ZF Friedrichshafen, Robert Bosch, Budweg, WABCO, and Brakes International.

Regional Segmentations:-

North America automotive brake caliper market was valued at more than USD 4.5 billion in 2016 and will grow considerably till 2024. Improving sales of commercial vehicles and strengthening online distribution channel across the region will drive the industry growth. Rising implementation of disc brakes in passenger vehicles will further propel the regional growth.

Automotive brake caliper market from Asia Pacific will grow substantially, at more than 3% CAGR from 2017 to 2024. Proliferating vehicle production coupled with enhanced manufacturing units across the region will essentially impact the industry penetration. Rising demand from the emerging economies including South Korea, China, and India will further support the regional dominance.

Make an inquiry before buying this report @ https://www.gminsights.com/inquiry-before-buying/2336

Major Points of Table Of Content:-

Chapter 1 Methodology & Scope

1.1 Methodology
1.1.1 Initial data exploration
1.1.2 Statistical model and forecast
1.1.3 Industry Insights and validation
1.1.4 Definitions, assumptions & forecast parameters
1.1.4.1 Definitions
1.1.4.2 Assumptions & forecast parameters
1.2 Data sources
1.2.1 Secondary
1.2.2 Primary

Chapter 2 Executive Summary

2.1 Automotive brake caliper industry 3600 synopsis, 2013 - 2024
2.1.1 Business trends
2.1.2 Vehicle trends
2.1.3 Product trends
2.1.4 Distribution channel trends
2.1.5 Piston material trends
2.1.6 Manufacturing process trends
2.1.7 Regional trends

Chapter 3 Automotive Brake Caliper Industry Insights

3.1 Industry segmentation
3.2 Industry landscape, 2013- 2024
3.3 Industry ecosystem analysis
3.3.1 Component suppliers
3.3.2 Manufacturers
3.3.3 Profit margin analysis
3.3.4 Distribution channel analysis
3.3.4.1 OEM
3.3.4.2 Aftermarket
3.3.4.3 E-commerce
3.3.5 Application
3.3.6 Vendor matrix
3.4 Pricing analysis
3.4.1 Regional Pricing
3.4.1.1 North America
3.4.1.2 EU
3.4.1.3 APAC
3.4.1.4 LATAM
3.4.1.5 MEA
3.4.2 Cost structure analysis
3.4.2.1 Manufacturing cost
3.4.2.2 Labor cost
3.4.2.3 Others
3.5 Brake calipers production capacity per region, 2013-2016
3.5.1 North America
3.5.2 Europe
3.5.3 Asia Pacific
3.5.4 Latin America
3.5.5 MEA
3.6 Technology landscape
3.6.1 Electric park brake
3.6.2 Low drag caliper
3.6.3 Rear caliper and integrated park brake
3.7 Regulatory landscape
3.7.1 North America
3.7.1.1 15 CRR NY 79.21, Inspection of motor vehicles
3.7.1.2 Compliance, Safety, Accountability (CSA)
3.7.1.3 Federal Motor Vehicle Safety Standard (FMVSS) No. 121, Air Brake Systems
3.7.2 Europe
3.7.2.1 Regulation No 13 of the Economic Commission for Europe of the United Nations (UN/ECE)
3.7.3 Asia Pacific
3.7.3.1 China Emission Standards
3.7.3.2 Japan Emission Standards
3.7.4 LATAM
3.7.4.1 Brake Standards
3.7.4.2 Motor vehicle and engine emission standards
3.7.5 MEA
3.7.5.1 Requirements for upgrading brakes
3.8 Industry impact forces
3.8.1 Growth drivers by region
3.8.1.1 North America
3.8.1.1.1 Industry players inclination towards automotive e-commerce
3.8.1.2 EUROPE
3.8.1.2.1 Implementation of enhanced vehicle safety systems, owing to stringent safety regulations
3.8.1.3 Asia Pacific
3.8.1.3.1 Growth in passenger vehicle sales
3.8.1.3.2 Rising production of zero emission vehicles
3.8.1.4 LATAM
3.8.1.4.1 Increasing automotive production & presence of auto players
3.8.1.5 Middle East & Africa
3.8.1.5.1 Demand for safety feature in luxury vehicles
3.8.2 Industry pitfalls & challenges
3.8.2.1 Prohibitive cost
3.8.2.2 Re-manufacturing challenges and highly matured market
3.9 Innovation & sustainability
3.10 Growth potential analysis
3.11 Porter’s analysis
3.12 Competitive landscape, 2016
3.12.1 Top company overview
3.12.2 Market share analysis
3.12.3 Strategy dashboard
3.13 PESTLE analysis

Browse Full Report @ https://www.gminsights.com/industry-analysis/automotive-brake-caliper-market

OEMs will acquire maximum revenue share owing to installation of brake calipers during the vehicle manufacturing. Increasing production of two-wheelers, passenger and commercial vehicles across the globe has led to an upsurge in FDIs in emerging economies, further contributing towards the revenue generation. Automotive brake caliper market from aftermarket will witness more than 3% CAGR from 2017 to 2024. This can be credited to cost effectiveness offered by the channel.

High pressure die casting will dominate the automotive brake caliper market over the coming years owing to extensive usage of this process during the production of steel calipers. Provision of enhanced surface finish and readily available raw materials will further result in high preference towards the process, supporting the industry dominance. Gravity die casting will exhibit around 4% CAGR over the next eight years owing to rising deployment of the process to produce aluminum variants. Provision of high dimensional accuracy is another factor positively impacting the segment’s growth.

About Global Market Insights:

Global Market Insights, Inc., headquartered in Delaware, U.S., is a global market research and consulting service provider; offering syndicated and custom research reports along with growth consulting services. Our business intelligence and industry research reports offer clients with penetrative insights and actionable market data specially designed and presented to aid strategic decision making. These exhaustive reports are designed via a proprietary research methodology and are available for key industries such as chemicals, advanced materials, technology, renewable energy and biotechnology.

Contact Us:

Arun Hegde
Corporate Sales, USA
Global Market Insights, Inc.
Phone: 1-302-846-7766
Toll Free: 1-888-689-0688
Auto Blog: freeautomotivenews.com
Email: sales@gminsights.com
Web: www.gminsights.com

This release was published on openPR.