openPR Logo
Press release

Opportunities for the global advanced composites to reach $5.2 billion by 2022

06-13-2018 01:41 PM CET | Business, Economy, Finances, Banking & Insurance

Press release from: Lucintel LLC

Insights that Matter

Insights that Matter

According to a new market report published by Lucintel, the future of the global advanced composites market looks promising with opportunities in various end use industries such as aerospace & defense, wind energy, transportation, marine, construction, electrical/electronics, consumer goods, and pressure vessels. The global advanced composites material market is expected to reach an estimated $5.2 billion by 2022 and it is forecast to grow at a CAGR of 8.0% from 2017 to 2022. The global advanced composites end product market is expected to reach an estimated $17.1 billion by 2022. The major drivers of growth for this market are increasing demand of lightweight materials in the aerospace & defense and automotive industry.
In this market, carbon fiber, S-glass fiber, and aramid fiber are the major fiber used to manufacture advanced composites parts for various end use industries such as aerospace & defense, transportation, wind energy and consumer goods. On the basis of our comprehensive research, Lucintel forecasts that the transportation is expected to show above average growth during the forecast period. Growing demand for lightweight materials in the automotive industry is expected to spur growth for this segment over the forecast period.
Within the global advanced composites market, aerospace & defense application is expected to be to remain the largest market by volume and value consumption. The major driver for this segment is the increase penetration of composites in next generation commercial aircraft, like Boeing’s B787 and Airbus 380, regional aircraft such as Bombardier’s C Series, and general aviation aircraft such as Cirrus and Diamond.
By resin type, epoxy, phenolic, and vinyl ester are the major resin used to manufacture advanced composite parts. Epoxy resin composites are expected to be the largest market by value and volume.
North America is expected to remain the largest market by value and volume and is also expected to experience the highest growth over the forecast period because of growth in end-use industries and the increasing demand for lightweight materials in the aerospace and automotive industries.

Emerging trends, which have a direct impact on the dynamics of the industry, include increased demand for carbon fiber which has high tensile strength, modulus, and compatibility with different resins. Toray, Teijin, Mitsubishi Rayon, Hexcel, Dupont, Momentive, Huntsman, and Olin Epoxy are the major advanced composite manufacturers in the global advanced composites market.

Lucintel, a leading global strategic consulting and market research firm, has analyzed growth opportunities in the global advanced composites market by end use industry, fiber type, resin type and region. Lucintel has prepared a comprehensive research report entitled “Growth Opportunities in the Global Advanced Composites Market 2017-2022: Trends, Forecast, and Opportunity Analysis.” The Lucintel report serves as a catalyst for growth strategy, as it provides a comprehensive data and analysis on trends, key drivers, and directions. The study includes a forecast for the global advanced composites market by end use industries, fiber type, resin type, and region, as follows:

By end use industries ($ Million and Million Pounds from 2011 to 2022):
• Aerospace & Defense
• Wind Energy
• Automotive
• Marine
• Construction
• E&E
• Consumer Goods
• Pressure Vessels
• Others
By Fiber Type ($ Million and Million Pounds from 2011 to 2022):
• Carbon Composites
• S-Glass Composites
• Aramid Composites
By Resin Type ($ Million and Million Pounds from 2011 to 2022):
• Epoxy Composites
• Phenolic Composites
• Vinyl ester Composites
• Thermoplastic Composites
• Other Composites
By Region ($ million and Million Pounds from 2011 to 2022):
• North America
• Europe
• Asia Pacific
• Rest of the World
This 249-page research report will enable you to make confident business decisions in this globally competitive marketplace. For a detailed table of contents, contact Lucintel at +1-972-636-5056 or email us at helpdesk@lucintel.com. Lucintel offerings include Advanced Materials Reports, Composite Materials Market Report, Opportunity Screening and Analysis, Capital Investment Feasibility and SWOT Analysis.

This report answers following 11 key questions:
Q. 1 What are some of the most promising, high-growth opportunities for the global advanced composites market by end use industries (Aerospace & Defense, Wind Energy, Automotive, Marine, Construction, Electrical/electronics, Consumer Goods, Pressure Vessels, and Others), fiber type (Carbon Composites, S-Glass Composites and Aramid Composites), resin type (Epoxy Composites, Phenolic Composites, Vinyl ester Composites, Cyanate and BMI Composites, Thermoplastic Composites), and region (North America, Europe, Asia Pacific, and the Rest of the World)?
Q. 2. Which segments will grow at a faster pace and why?
Q. 3. Which region will grow at a faster pace and why?
Q.4 What are the key factors affecting market dynamics? What are the drivers, challenges and business risks in this market?
Q.5. What are the business risks and competitive threats in this market?
Q.6. What are the emerging trends in this market and reasons behind them?
Q.7. What are some of the changing demands of customers in the market?
Q.8. What are the new developments in the market? Which companies are leading these developments?
Q.9. Who are the major players in this market? What strategic initiatives are key players pursuing for business growth?
Q.10. What are some of the competing products in this market and how big of a threat do they pose for loss of market share by material / product substitution?
Q.11. What M & A activities have occurred in the last 5 years in this market?

Lucintel, the premier global management consulting and market research firm, creates winning strategies for growth. It offers market assessments, competitive analysis, opportunity analysis, growth consulting, M&A, and due diligence services to executives and key decision-makers in a variety of industries. For further information, visit www.lucintel.com.

Lucintel LLC
Lucintel, 8951 Cypress Waters Blvd., Suite 160, Dallas, TX 75019
Ph: +1-972-636-5056 Fax: +1-877-883-5140
marketing@lucintel.com

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Opportunities for the global advanced composites to reach $5.2 billion by 2022 here

News-ID: 1080424 • Views:

More Releases from Lucintel LLC

Access Control as a Service Market is anticipated to grow at a CAGR of 11% durin …
The global access control as a service market is projected to reach $1.1 billion by 2025, at a CAGR of 11% during 2020-2025. The growth of access control as a service market is driven by increasing uses of cloud computing platforms and IoT technology, growing demand for cloud based hosted and managed services, and rising adoption of electronic security products in access control as a services market. Some of the
Opportunities for European automotive composites market to reach $5.3 billion by …
According to a new market report published by Lucintel, the future of the automotive composites market looks good with opportunities in the power train, exterior, interior, electrical and electronics, and under body system. The European automotive composites market is expected to reach an estimated $5.3 billion by 2025 with a CAGR of 3.7% from 2020 to 2025. The major drivers for this market are increasing automotive production and growing demand
Technology Landscape, Trends and Opportunities in the Global Automotive Foam Mar …
The technologies in automotive foam have undergone significant changes in recent years, with traditional bulk foams to advanced Spray Foams. The rising wave of new technologies, such as polyolefin based foam and polyurethane based foams are creating significant potential in various vehicle platforms due to excellent mechanical strength, light weight, and wear and weathering resistance properties. To download report brochure, please go to https://www.lucintel.com/technology-automotive-foam-market.aspx and click "report brochure" tab from the
Opportunities for composites in the global aerospace market to reach $3.3 billio …
According to a new market report published by Lucintel, the future of the global aerospace composites material market looks promising with opportunities in commercial aircraft, regional aircraft, general aviation, helicopter, and military aircraft industries. The global aerospace composites materials market is expected to decline in 2020 due to global economic recession led by COVID-19. However, market will witness recovery in the year 2021 and it is expected to reach an

All 4 Releases


More Releases for Composite

Composite Rebar Market
The "Composite Rebar Market" is expected to reach USD xx.x billion by 2031, indicating a compound annual growth rate (CAGR) of xx.x percent from 2024 to 2031.  The market was valued at USD xx.x billion In 2023. Growing Demand and Growth Potential in the Global Composite Rebar Market, 2024-2031 Verified Market Research's most recent report, "Composite Rebar Market: Global Industry Trends, Share, Size, Growth, Opportunity and Forecast 2023-2030," provides an in-depth examination
Construction Composite Market: Building for the Future with Advanced Composite M …
Coherent Market Insights added the statistic report, titled "Construction Composite Market Recent Trends, In-depth Analysis, Size and Forecast 2023-2030". The Construction Composite report includes an overview of the competitive landscape, geographic segmentation, innovation, and future developments, as well as a collection of tables and data. An examination of the competitive landscape reveals information about each vendor, including company profile, total revenue (financials), market potential, global presence, revenue, market share, pricing,
Composite Core Mastery: Unleashing the Potential of Advanced Core Materials in C …
Core Material for Composites Market 2023 Forecast: Unveiling Opportunities and Growth Core Material for Composites Market research report helps to recognize the market challenges and opportunities. Global Core Material for Composites Market report contains the recent forecast research for the predicted period. The report extensively offers the latest information about the technological developments and market growth prospect on the basis of the regional landscape. This Report offers a complete evaluation of
Composite Resin
According to a new market research report published by Global Insight Services "Composite Resin Market" is expected to grow by 2031. Report includes in-depth segmentation and market size data by categories, product types, applications, and geographies. Report also includes comprehensive analysis of key issues, trends and drivers, restraints and challenges, competitive landscape, as well as recent events such as M&A activities in the market. Download Sample of Report : https://www.globalinsightservices.com/request-sample/GIS20852 Composite resin
Assured Composite® Presents the Best of Composite Decking
Assured Composite® ensures customer happiness by providing high-quality wood plastic composite decking, to consumers across the United Kingdom and beyond. Leicestershire, England - UK | January 25, 2022 -- Customer satisfaction is ensured by Assured Composite®, which provides high-quality wood plastic composite decking, to customers in the United Kingdom and beyond. Because of their forward-thinking staff's attention to efficiency, quality, and customer service, customers can anticipate a hassle-free end-to-end solution at
Global Wind Turbine Composite Materials Market, Global Wind Turbine Composite Ma …
The wind turbine composite material forms an important component of wind turbine for the production of turbine rotor blade. This composite material is made up of matrix & fiber to provide physical strength and distributes loads in composite. The matrix material acts as a binder and maintains spacing of the fiber material, therefore protecting the fiber from environmental & abrasion damage. The composite material manufactured from the fortification of matrix