openPR Logo
Press release

Airborne Wind Turbine Market - Next Generation of Wind Power

05-23-2018 10:24 AM CET | Advertising, Media Consulting, Marketing Research

Press release from: Xpodence Research

Airborne Wind Turbine Market - Next Generation of Wind Power

There are many sources of energy used as substitutes of non-renewable energy sources which includes sunlight, wind, rains, tides, etc. Wind energy is the largest source of energy, and approximately accounts for half of the energy produced from other alternative sources. Several technologies have been introduced to harness wind energy. As per the Global Wind Energy Council (GWEC) and Greenpeace International, wind turbines are expected to supply 12% of the global electricity and contribute as the major source in reducing CO2 emissions, by year 2020.

An Airborne wind energy system is a technology, which includes turbines at high altitude, which extract hundred times greater kinetic energy as compared to the conventional wind turbines. In Airborne energy systems, airborne wind turbines are suspended in the air, without any tower or support from the ground and can operate at high as well as low altitudes. The airborne wind turbines are secured to the ground using electrically conductive tethers, which helps energy transmission.

Request For Free Sample Of The Report @

Increasing demand for alternate sustainable energy sources, fluctuating prices of fuel derived from non-renewable sources, and low maintenance system cost are the major factors propelling the growth of airborne wind turbine market. Extreme bad weather conditions, may lead to temporary suspension of these wind turbines. Moreover, due to their setup at the higher altitude, there is constant fear of unpredicted collision. These factors may restrain the airborne wind turbine industry.

The global airborne wind turbine market is bifurcated by system, type and region. Based on the system, the airborne wind turbine (AWT) industry is segmented as ground generator system and fly generator system. Ground generator system is used for the conversion from mechanical energy to electrical energy, is completed on ground, whereas in fly generator system, the conversion takes place on the aircraft in the air. The ground generator system includes different types of systems such as leading edge inflatable kite, supported leading edge kite, foil kite, glider and swept rigid wing among all the other systems. While the fly generator system includes various systems designed and manufactured by Joby Energy, plane with four turbines designed by Makani Power, Static suspension quad rotor by Sky WindPower, etc.

Further, based on the types of turbines used, which includes kite type, balloon type, kytoon type and tethered auto gyro type. The kite type turbine is suspended at higher altitudes and extracts energy through the application of dual purpose circular fan, rotary wing kite and multi-tethered kites among the others. Balloon type uses an enormous helium-filled balloon, blimp or envelope that floats over the altitude of more than 1000 feet. The gas-filled turbine has helium, as it is lighter and provides buoyancy to the entire arrangement. The balloon feeds the energy into the grid through cables that will connect to the ground. In kytoon type, the turbine uses both balloon and kite arrangement for power generation from high altitude winds, whereas in tethered auto gyro type, the wind turbines are made to float by utilizing a tethered crankshaft, unmanned aerial vehicle, gyrocopter or gyroplane, alongside an unpowered rotor providing thrust.

Geographically, the market includes North America, Europe, Asia Pacific, Middle East and Africa and Latin America as major regions which are further bifurcated into countries/regions such as the U.S, the U.K., Germany, France, Japan, China, India, GCC, North Africa, South Africa and Brazil. Government organizations across several countries have involved in framing new rules and regulations to reduce pollution by encouraging methods such as airborne wind energy to produce clean and never-ending energy. Such initiatives by government are fueling the growth of the market.

Obtain Report Details @

The prominent players involved in the development of, airborne wind turbine includes ACCIONA S.A., DeWind Co., Fuhrländer AG, Ampyx Power, E-Kite Netherlands BV, EnerKite GmbH, Altaeros Energies, eWind Solutions, Kite Power Solutions, Ltd., Makani Power, SkySails GmbH & Co. KG, Windlift LLC, Twingtec AG, Omnidea, Kitenergy S.r.l., kPower LLC, and KiteMill among all the other players. In May 2018, Makani Power produced power for the first time with a 600-kW energy kite with eight rotors and the wingspan of a small jet airliner. The company has the high-performance carbon fiber kite which measures 85 ft across, and has eight onboard rotors each of 7.5 feet diameter. The company is carrying R&D for the system which changes to lift power generation and permitting the kite to produce more electricity than its consumption will be carried. Other players are similarly involved in research & development, acquisitions, expansions and collaboration for the strategic growth.

About Us-

Xpodence Research is a U.S. based Market Research Company and offers the most extensive collection of progressive surveying syndicated and customized research reports of various categories for private and public industries across the globe.

We offer the comprehensive market research solution for all the industries by performing the in-depth study of industry trends, verticals globally. We believe in building an eternal bond with our customers through providing them inclusive research study both customized and syndicated based on their specific requirements.

The organizations in every industry such as Technology, Pharmaceuticals, Consumable Goods, Food & Beverage and others demands a market-based solutions for various significant decisions based on productivity and output globally. Our services are tailored specifically to our clients by proposing them the potential outcome, based on our in-depth analysis and insights for exploring the growth strategies through providing the best possible decision for quality production.

Contact Us-

Xpodence Research
USA Office
244 , Madison Avenue
New York City, NY - 10016
United States
Toll Free +1- 844-445-2861

This release was published on openPR.

Permanent link to this press release:

Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Airborne Wind Turbine Market - Next Generation of Wind Power here

News-ID: 1059063 • Views: 867

More Releases from Xpodence Research

Real-Time Location Systems (RTLS) Market For Healthcare - Hardware Segment Contr …
RTLS or Real Time Location System is a combination of hardware, software and service components, which is used for the realtime monitoring, tracking and management of equipments, patients, and staff personnels. The Real Time Location Systems find applications in civil as well as military healthcare facilities. With continuous advancements in healthcare technology, the RLTS are finding increase in adoption in many parts of the world, with developed countries at the
Scar Treatment Market - Keloids and Burned Scars Treatment to Take More Priority …
The global scar treatment market has been examined to pick up a comprehension about the changing situation of the appearance and aesthetic remedial measures. Scar revision is a process that is utilized to limit the scars in a way that they seem more reliable with the encompassing skin tone and skin texture. Scars are unmistakable signs that stay after an injury mends. They are unavoidable aftereffects of damage or a
Shotcrete Concrete Market - Key Manufacturers Motivated Towards the Adoption of …
Shotcrete or sprayed concrete is generally used in a wide range of applications including construction and wastewater treatment structures. It is considered to be an efficiently performing mortar or concrete which is blown at high speed on the desired surface of a construction site, generally through a hose. Shotcrete or sprayed concrete is generally conveyed by using two methods including dry mix process and wet mix process. The wet mix
Tube Packaging Market - Key Manufacturers Motivated Towards the Adoption of Key …
A hollow and cylindrical container that is made by paperboard, plastic or aluminum is called tube. Tubes are basically used for storing viscous liquid type materials like toothpaste, adhesive, ointment, and others. At the time of manufacturing and processes of filling, both the ends of the tube are cured in a different manner. An oval orifice is present on one of the end of the tube body, that can

All 5 Releases

More Releases for Wind

Wind Energy Technology Market
HTF MI released a new market study on Southeast Asia Wind Energy Technology Market with 100+ market data Tables, Pie Chat, Graphs & Figures spread through Pages and easy to understand detailed analysis. At present, the market is developing its presence. The Research report presents a complete assessment of the Market and contains a future trend, current growth factors, attentive opinions, facts, and industry validated market data. The research study
Global Small and Medium Wind Turbines Market 2018-2025 | Machinery Update : Berg …
Press Release – 20 Dec 2018 Research and Development News -- . . Latest Update "Global Small and Medium Wind Turbines Market Insights, Forecast to 2025" with Industries Survey | Global Current Growth and Future. ' ' This report presents the worldwide Small and Medium Wind Turbines market size (value, production and consumption), splits the breakdown (data status 2013-2018 and forecast to 2025), by manufacturers, region, type and application. This study also analyzes the market
Wind Energy Market Is Thriving Worldwide | Aegis Wind, Ainscough Wind Energy Ser …
HTF MI recently introduced Global Wind Energy Market study with in-depth overview, describing about the Product / Industry Scope and elaborates market outlook and status to 2023. The market Study is segmented by key regions which is accelerating the marketization. At present, the market is developing its presence and some of the key players from the complete study are Aegis Wind, Ainscough Wind Energy Services, Areva Wind, Aris Wind, Berkshire
Monika Thiele: Wind-Worte
GALERIE SUPPER, Baden-Baden, gladly announces the exhibition Wind-Worte with recent works of the artist Monika Thiele (b.1966, Erfurt). The evening also marks the beginning of the CAB-Event, which will transform the city center of Baden-Baden into a vibrant place for art the following Sunday afternoon. Thiele is known for her narrative portraits which are characterized by a dense net of interfering threads, producing a stunning depth. The complex layering of
Global Small and Medium Wind Turbines Market 2017 - Bergey Wind Power, Gaia-Wind …
Latest Research Report titled " Global Small and Medium Wind Turbines Market Professional Survey Report 2017 " features Key Market Players, Segments, Applications. Report Presents Global Market Survey, Growth, Challenges and Forecast. This report studies Small and Medium Wind Turbines in Global market, especially in North America, China, Europe, Southeast Asia, Japan and India, with production, revenue, consumption, import and export in these regions, from 2012 to 2016, and forecast to
Small and Medium Wind Turbines Market 2017-Bergey Wind Power, Gaia-Wind, United …
Ampair Evance Wind Turbines Endurance Wind Power Polaris America Windspire Energy Gaia-Wind Kestrel Wind Turbines Urban Green Energy ElectroVent, recently published a detailed market research study focused on the "Small and Medium Wind Turbines Market" across the global, regional and country level. The report provides 360° analysis of "Small and Medium Wind Turbines Market" from view of manufacturers, regions, product types and end industries. The research report analyses and provides the historical data along with current performance