Press release
Cutting Tool Inserts Market is Expected to Represent US$ 25,000 Mn by 2025
Request for Table of Contents @ https://www.persistencemarketresearch.com/methodology/21751
The report titled ‘Cutting Tool Inserts Global Industry Analysis (2012-2016) and Forecast (2017–2025)’ reflects key actionable insights on the global market. The growth of industrialization and construction industry is helping the global cutting tool inserts market to expand.
Persistence Market Research’s forecast suggests that global cutting tool inserts market is expected to reach a value of over US$ 25,000 Mn by the end of 2025, growing at a CAGR of 6.6% during the forecast period. The robust growth of market is expected to encourage the manufacturers and companies to focus on enhancing product features and achieving higher operational life for cutting equipment, machines and respective consumables to increase its rate of adoption.
Based on material type, carbides segment is expected to lead the global cutting tool inserts market. Carbides are the most preferred type of cutting tool inserts due to their cost effectiveness and durability. According to the reports, carbides segment is expected to reach a value over US$ 16,800 Mn by the end of 2025, with a major contribution by a sub segment tungsten carbide.
In terms of substrate, stainless steel segment dominates the market. Stainless steel substrate is used in various end use industries such as locomotive, agriculture, water, jewellery etc. It is also in strong competition with cast iron. Stainless steel segment is expected grow at a CAGR of 7.1% during the forecast period.
On the basis of application, threading segment leads the market with a high margin. Threads are usually found in nuts and bolts for tightening purposes. These applications find use in various end use industries such as automotive, construction, ship building etc. The market forecast suggests that the threading segment is expected to reach a significant market valuation by the end of 2025, growing at a relatively high value CAGR during the forecast period.
In terms of end use, transportation segment is expected to be at the vanguard, surpassing other end use segments. Among its sub segments, automotive category is expected to have the largest market share. According to the forecast, transportation segment is expected to grow at a stellar CAGR of 7.2% during the forecast period.
Based on region, APAC leads the global cutting tools inserts market with a higher market valuation of about US$ 9,000 Mn by the end of 2025. However cutting tools inserts market in MEA is projected to grow at a relatively high value CAGR during the forecast period.
Request to View Sample of Research Report @ https://www.persistencemarketresearch.com/samples/21751
This comprehensive research report consists of a brief profile of all the major players in the industry. Some of these key players mentioned in the report are KYOCERA Corporation, Mitsubishi Materials Corporation, Asahi Diamond Industrial Co. Ltd., SHOWA DENKO K.K., ISCAR LTD., Knight Carbide, Inc., ILJIN DIAMOND CO., LTD., Tomei Diamond Co., Ltd., Sinter Sud S.p.A. etc.
About Us
Persistence Market Research (PMR) is a third-platform research firm. Our research model is a unique collaboration of data analytics and market research methodology to help businesses achieve optimal performance.To support companies in overcoming complex business challenges, we follow a multi-disciplinary approach. At PMR, we unite various data streams from multi-dimensional sources. By deploying real-time data collection, big data, and customer experience analytics, we deliver business intelligence for organizations of all sizes.
Contact Us
Persistence Market Research
305 Broadway
7th Floor, New York City,
NY 10007, United States,
USA – Canada Toll Free: 800-961-0353
Email: sales@persistencemarketresearch.com
Web: http://www.persistencemarketresearch.com
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Cutting Tool Inserts Market is Expected to Represent US$ 25,000 Mn by 2025 here
News-ID: 1055978 • Views: …
More Releases from Persistence Market Research
Sportswear Fabric Market to Reach US$40.5 Bn by 2032, Growing at 5.0% CAGR
The global sportswear fabric market is undergoing a significant transformation as consumer expectations shift toward performance, comfort, sustainability, and style. As active lifestyles and fitness-oriented habits become the global norm rather than a niche trend, the fabrics used to manufacture sportswear garments are gaining immense attention among brands, manufacturers, and material innovators.
➤ Download Your Free Sample & Explore Key Insights:
https://www.persistencemarketresearch.com/samples/30859
According to recent industry projections, the sportswear fabric market size…
Image Guided Dentals Surgery Market Set to Transform Modern Implant Dentistry
Image-guided dental surgery (IGDS) represents one of the most transformative advancements in modern dentistry. As dental practices worldwide shift toward precision-driven, minimally invasive techniques, IGDS has emerged as a critical tool for improving patient outcomes, enhancing surgical accuracy, and elevating the quality of dental care. By integrating advanced imaging systems, 3D visualization, virtual planning tools, and computer-navigation technologies, IGDS systems allow clinicians to perform complex procedures with a higher degree…
Textile Sizing Chemicals Market: Growing Demand for High-Performance and Sustain …
Introduction
Textile sizing chemicals play a crucial role in the textile manufacturing chain, particularly during the weaving process. Sizing is the step where yarns-especially warp yarns-are coated with a protective adhesive film to improve strength, reduce friction, minimize hairiness, and lower breakage during weaving. This process enhances weaving efficiency and yields higher-quality fabrics with improved texture, durability, and uniformity. Without sizing chemicals, modern high-speed looms would not be able to achieve…
2-Ethylhexanoic Acid Market Trends Transforming the Industrial Chemicals Landsca …
Introduction
2-Ethylhexanoic Acid (2-EHA) is a widely used organic carboxylic acid known for its clear-to-yellowish appearance, mild odor, and excellent solubility in organic solvents. With strong chemical stability, high boiling point, and the ability to react with metals and alcohols to form esters or metal salts, 2-EHA serves as a versatile intermediate in several industrial applications. The global market for 2-EHA is deeply influenced by trends in downstream industries such as…
More Releases for Cutting
Comparing CO2 Laser Cutting to Other Fabric Cutting Methods
Choosing the Right Tool for Precision and Efficiency
Choosing the correct focal length for your CO2 laser is crucial for achieving precise cuts, especially when working with laser cutting fabric. The focal length determines the laser beam's spot size and depth of focus, directly impacting cutting quality. Shorter focal lengths (e.g., 1.5" to 2") are ideal for fine details on thin materials, while longer focal lengths (e.g., 4" to 5") suit…
Cutting Edge Solutions: Analyzing the Booming Cutting Fluid Market
The global cutting fluid industry is poised for significant growth, with projections indicating a Compound Annual Growth Rate (CAGR) of 4.1% from 2023 to 2033. By 2033, the market is expected to achieve a valuation of USD 16.3 billion, underscoring its critical role in industrial manufacturing and machining processes.
Cutting fluids, often referred to as coolants or lubricants, play a pivotal role in industrial metalworking. These fluids are designed to reduce…
Is Die Cutting The Same As Cricut? What Is The Difference Between Die Cutting An …
Die cutting and Cricut are related but not exactly the same. Die cutting is a general term for the process of using a die to cut out shapes from various materials, such as paper, fabric, or metal. This can be done manually with a die cutting machine or press, or with the help of electronic die cutting machines like the Cricut.
Cricut is a brand of electronic die cutting machines that…
Profboard launches cutting-edge cutting board on Kickstarter
Image: https://www.getnews.info/wp-content/uploads/2024/06/1718783865.png
Revolutionizing Kitchen Safety and Convenience for Home Chefs
Profboard, the premier manufacturer of innovative cutting board systems, is proud to announce the launch of the Profboard Private edition. Since 2006, Profboard has been a trusted name among chefs and culinary enthusiasts worldwide. Now, the same professional-grade quality and innovation can be experienced in home kitchens.
Profboard sets a new standard with its cutting-edge cutting board system designed to revolutionize your kitchen.…
Fiber Laser Metal Cutting Machines Market Cutting-Edge Technology for Efficient …
Global Fiber Laser Metal Cutting Machines Market Overview:
The Fiber Laser Metal Cutting Machines market is a broad category that includes a wide range of products and services related to various industries. This market comprises companies that operate in areas such as consumer goods, technology, healthcare, and finance, among others.
In recent years, the Fiber Laser Metal Cutting Machines market has experienced significant growth, driven by factors such as increasing consumer demand,…
Metal Cutting Fluids Market Report 2018: Segmentation by Type (Emulsion Metal Cu …
Global Metal Cutting Fluids market research report provides company profile for Blaser, Idemitsu Kosan, Daido Chemical Industry, COSMO Oil, Master, Exxon Mobil Corporation, Houghton (Gulf Oil), BP, Fuchs, Yushiro Chemical, Quaker and Others.
This market study includes data about consumer perspective, comprehensive analysis, statistics, market share, company performances (Stocks), historical analysis 2012 to 2017, market forecast 2018 to 2025 in terms of volume, revenue, YOY growth rate, and CAGR for…
