Press release
Automotive Flywheel Market Intelligence Report Offers Growth Prospects (2017-2025)
The automotive industry has significantly shifted towards light weighing and enhancing performance over past few decades. Companies has been continuously giving efforts to improve both non-functional and functional components of an vehicle, one such component is flywheel. Flywheels is an integral part of all engines of automobiles, without which the engine seize to work. In an automotive engine operating on either four stroke or two stroke the power is produced only in power stroke and all the other stages require external power, and for this reason flywheel is used. Flywheels are designed in such a way that it can have a high moment of inertia so that it can absorb and store extra energy during power stroke.
This stored energy is provided back to crank shaft for the other three stroke, namely suction, compression and exhaust strokes. Other than this it also removes the fluctuation in output power of the engine so that the vehicle runs smoothly. Recently the manufacturers are more focused towards decreasing the weight of the engine as well as increasing the efficiency, this is done to reduce the carbon emission of the vehicle for which lighter material flywheel with high moment of inertia is required. So the market for flywheel is been witnessing hefty investments in R&D to manufacture more efficient, lighter flywheel with higher energy storage capacity.
Automotive Flywheel Market: Market Dynamics
It is the R&D carried out on flywheel material which has significantly increased the efficiency of the engine in the recent years. Also, growth in the automobile sector is an important driving factor associated with the automotive flywheel market. Also, the increasing demand for vehicles with reduced fuel consumption, lighter weight and higher efficiency is anticipated to drive automotive flywheel market. Apart from this, the demand for flywheel is anticipated to witness a direct-correlation with the growth of automotive production and sales.
Request for Table of Contents @ https://www.persistencemarketresearch.com/toc/18943
However, increasing adoption of electric vehicle restraint to the growth of the global automotive flywheel market. The rising trend for repair rather than replacing is a major restraint in the aftermarket.
Automotive Flywheel Market: Market Segmentation
On the basis of vehicle type, the Automotive Flywheel Market can be segmented as follows:
Passenger vehicle
Light commercial vehicle
Heavy commercial vehicle
On the basis of sale channels, the Automotive Flywheel Market can be segmented as follows:
OEM
Aftermarket
On the basis of mass, the Automotive Flywheel Market can be segmented as follows:
Single mass flywheel
Dual mass flywheel
Others
Automotive Flywheel Market: Regional Outlook
Europe, with large number of automotive component technology leaders based out the region is anticipated to remain the innovation hub in the global automotive flywheel market. With the healthy growth of automotive sales in EU5 countries, the market is also expected to witness significant growth in the demand. North America also has a large number of automotive OEMs based out in the region, primarily U.S. Thus making U.S. a prime market for automotive flywheel. However, in terms of demand Asia Pacific will lead the overall market as the region accounts for a major share of the global automotive production. India, China and ASEAN region are anticipated to remain the major growth contributor in the market. The market in the Middle East & Africa region will witness significant demand for automotive flywheel from the aftermarket and demand from OEMs is anticipated to remain relatively low.
Request to View Sample of Research Report @ https://www.persistencemarketresearch.com/samples/18943
Automotive Flywheel Market: Market Participants
Some of the examples of the market participants operating across the value chain of the global Automotive Flywheel Market are:
Schaeffler Technologies AG & Co. KG
ZF Friedrichshafen AG
Linamar Corporation
Mancor Indiana, Inc.
EXEDY Globalparts
METALDYNE International (UK) Ltd
VALEO
Skyway Precision, Inc.
MA-PA MAK?NA PARÇALARI ENDÜSTR?S? A.?
Zhejiang Tieliu Clutch Co., Ltd.
Flybrid
Nasdaq, Inc
WAUPACA FOUNDRY, INC.
ABOUT US:
Persistence Market Research (PMR) is a third-platform research firm. Our research model is a unique collaboration of data analytics and market research methodology to help businesses achieve optimal performance. To support companies in overcoming complex business challenges, we follow a multi-disciplinary approach. At PMR, we unite various data streams from multi-dimensional sources. By deploying real-time data collection, big data, and customer experience analytics, we deliver business intelligence for organizations of all sizes.
CONTACT:
Persistence Market Research
305 Broadway
7th Floor, New York City,
NY 10007, United States,
USA – Canada Toll Free: 800-961-0353
Email: sales@persistencemarketresearch.com
Web: http://www.persistencemarketresearch.com
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Automotive Flywheel Market Intelligence Report Offers Growth Prospects (2017-2025) here
News-ID: 1021443 • Views: …
More Releases from Persistence Market Research
Frozen Foods Market Heats Up with Innovation and Growing Consumer Demand
Market Overview:
The frozen foods market consists of a wide range of products, including frozen fruits and vegetables, meat and seafood, ready-to-eat meals, and desserts. These products are preserved through freezing to maintain freshness and quality for an extended period.
Market Size and Growth:
The global market for frozen foods is forecasted to be of valuation US$ 281.0 Billion in the year 2022 which is expanding at a value CAGR of 5.1% and…
The Global Graphene Market's Striking Growth and Innovative Applications
Introduction
Graphene, a single layer of carbon atoms arranged in a hexagonal lattice, has gained global recognition for its extraordinary properties, such as exceptional electrical and thermal conductivity, mechanical strength, and flexibility. Since its isolation in 2004 by Andre Geim and Konstantin Novoselov, graphene has sparked considerable interest in both scientific and industrial communities. This report explores the current state of the graphene market and its potential growth opportunities.
Get Access To…
Business Opportunities in Cyber Security Mesh Market : Top Countries Data Analys …
Market Overview:
The projected global market size for cyber security mesh is expected to reach $8.8 billion by the year 2033, with an estimated valuation of $1.2 billion by 2023. This market is poised to experience a compound annual growth rate (CAGR) of 21.7% from 2023 to 2033.
The global Cyber Security Mesh market is poised for significant growth as organizations worldwide grapple with the escalating threat landscape. Cybersecurity has become an…
Synthetic Beta-Carotene Market To Boost Incredible Growth: 2033, Share Valuation …
Key market trends included a shift towards natural and plant-based ingredients, as consumers sought cleaner labels and healthier options. This drove the demand for naturally sourced beta-carotene, but synthetic beta-carotene still had its place due to its cost-effectiveness and consistency in production. The market was also influenced by regulatory changes and evolving dietary preferences, which affected the application and formulation of synthetic beta-carotene in various products.
To obtain the latest market…
More Releases for Flywheel
Flywheel Damper Market Analysis and Regional Outlook
Flywheel Damper Market: Overview
Flywheel damper is mainly used to provide continuous rotational energy, it is a rotating mechanical device which acts as a continuous flywheel. Flywheel damper is also used for reducing the torsional vibration created by operation of diesel or petrol engine. Flywheel damper reduces the vibration by storing the energy in different half's masses for the period of time. Flywheel dampers are also used for the controlling the…
Explore Global Flywheel Damper Market forecast 2019 – 2025
The report is a fine example of comprehensive and accurate research study on the global Flywheel Damper market. It digs deep into critical aspects of the global Flywheel Damper market, including market dynamics, competition, regional advancement, and segmentation. It provides verified market figures such as CAGR, market share, revenue, volume, production, consumption, gross margin, and price. The global Flywheel Damper market is segmented by type, application, and geography. The report…
Flywheel Energy Storage Systems Global Market Professional Survey Report 2019
Press Release – 12 Feb 2019
Research and Development News --
. .
Latest Update "Global Flywheel Energy Storage Systems Market Professional Survey Report 2018" with Industries Survey | Global Current Growth and Future.
' '
This report studies the global Flywheel Energy Storage Systems market status and forecast, categorizes the global Flywheel Energy Storage Systems market size (value & volume) by manufacturers, type, application, and region. This report focuses on the top manufacturers…
Global Flywheel Energy Storage Market Solutions & Advancements 2018
Qyresearchreports include new market research report "Global Flywheel Energy Storage Market Professional Survey Report 2018" to its huge collection of research reports.
The report on global Flywheel Energy Storage market is a result of extreme efforts taken by market experts and analysts in order to determine what are the important aspects and factors relatiting to the Flywheel Energy Storage industry and which information should be disregarded so as to provide readers…
Flywheel Damper Market Competitive Landscape by 2025
Flywheel Damper Market: Overview
Flywheel damper is mainly used to provide continuous rotational energy, it is a rotating mechanical device which acts as a continuous flywheel. Flywheel damper is also used for reducing the torsional vibration created by operation of diesel or petrol engine. Flywheel damper reduces the vibration by storing the energy in different half’s masses for the period of time. Flywheel dampers are also used for the controlling the…
Flywheel Energy Storage Market - Evolving Industry Trends and Insights 2024
Unlike storable objects, electricity cannot be stored for a longer duration without being lost to some extent. Storing electricity and releasing it during times of high demand or when its cost is profitable is a major challenge faced by utility companies worldwide. Researchers and technology companies are constantly on the lookout for effective and reliable ways of storing electric energy. Although a number present-day electricity grids operate effectively without electricity…
