Thermal spray coating market to surpass 900 kilo tons by 2024.

Technology advancements including the introduction of HVOF process has significantly replaced conventional hard chrome plating process by delivering low processing time. Benefits including minimal environmental effects, cost-effectiveness and high performance of machinery is expected to instigate thermal spray coating market.

Rising Thermal spray coating applications scope in several industries including aerospace and automotive owing to improved wear protection & chemical resistance will fuel market growth. Superior surface coating preference to enhance machinery components performance and reduce replacement cost in energy & gas sector will support industry expansion.

Metals are anticipated to register a growth over 9.5% up to 2024. Surging demand for strong finishing metal finishing for large structures including bridges and offshore oil platforms will stimulate thermal spray coating market growth. This material is extensively used in automotive and healthcare industries to provide enhanced thermal barrier protection and anti-corrosion on finishing surfaces.

Ceramic material was valued over USD 3 billion in 2016 owing to its superior adhesive bonding; high temperature resistance and high oxidation resistance properties. Ceramic provides robust surfaces to numerous automotive components, including diesel engine pistons, valves and cylinders. Increasing adoption of this material in aerospace engine systems, turbine blades and flame tubes to deliver better heat resistance will propel thermal spray coating market.

Request for Sample Copy of this Report@ https://www.gminsights.com/request-sample/detail/1447

Plasma process will witness high growth over the forecast timespan owing to its multi functionality features with metal and ceramics materials to provide aesthetic and clean surfaces. It is widely utilized in jet engines to prevent from high temperature of the combustion gases. Key properties including denser and tougher coverings makes the product more lucrative for aerospace industry.

Combustion flame process is projected to surpass 9 billion sales by 2024. Surge in machinery component repair works in industrial pumps and steel blowers has fueled demand for high surface bonding processes. Clean and uniform surfaces obtained through this high strength process on several metal machineries will positively impact thermal spray coating market penetration.

The automotive industry will observe a CAGR over 8.5% by 2024 owing to rising demand for passenger and commercial vehicles with durable coated components. Improved maintainability and reliability along with enhanced product life cycle will propel industry. Furthermore, high resistance towards scratch and decomposition on several automotive machineries will foster thermal spray coating market expansion.

Browse key industry insights from the report, “Thermal Spray Coating Market in detail along with the table of contents:
https://www.gminsights.com/industry-analysis/thermal-spray-coating-market

Aerospace components are generally subjected to harsh environments with extremely high heat and pressure. Thereby, increasing demand for shielding engine components from corrosion and heat will propel product demand. Key aerospace components that require these covering processes include high-pressure turbine seals, oil seals, bearings, compressor seals and rotor-path linings.

North America is estimated to be worth more than USD 2.3 billion in 2016 due to increasing requirement to achieve cost optimization in aerospace & defense and power industry. Enhanced aircraft performance at competitive prices while attaining all required regulatory, manufacturing protocols is expected to positively influence thermal spray coating market share.

Global thermal spray coating market share is slightly consolidated with presence of few international players and large number of regional participants. Key industry players include Oerlikon Metco, Cincinnati, H.C. Starck, Bodycote, and Praxair Surface Technologies. Other prominent players include Metallization, Thermion, Plasma-Tec, General Magnaplate, ASB Industries.

Request for Inquiry before buying this Report @ https://www.gminsights.com/inquiry-before-buying/1347

Report Content
Chapter 7 Thermal Spray Coating Market, By Region
7.1 Global thermal spray coating market share by region, 2016 & 2024
7.2 North America
7.2.1 North America market estimates and forecast, 2013 – 2024, (Kilo Tons) (USD Million)
7.2.2 North America market estimates and forecast, by material, 2013-2024, (Kilo Tons) (USD Million)
7.2.3 North America market estimates and forecast, by process, 2013-2024, (Kilo Tons) (USD Million)
7.2.4 North America market estimates and forecast, by end-use industry, 2013-2024, (Kilo Tons) (USD Million)
7.2.5 U.S.
7.2.5.1 U.S. market estimates and forecast, 2013 – 2024, (Kilo Tons) (USD Million)
7.2.5.2 U.S. market estimates and forecast, by material, 2013-2024, (Kilo Tons) (USD Million)
7.2.5.3 U.S. market estimates and forecast, by process, 2013-2024, (Kilo Tons) (USD Million)
7.2.5.4 U.S. market estimates and forecast, by end-use industry, 2013-2024, (Kilo Tons) (USD Million)
7.2.6 Canada
7.2.6.1 Canada market estimates and forecast, 2013 – 2024, (Kilo Tons) (USD Million)
7.2.6.2 Canada market estimates and forecast, by material, 2013-2024, (Kilo Tons) (USD Million)
7.2.6.3 Canada market estimates and forecast, by process, 2013-2024, (Kilo Tons) (USD Million)
7.2.6.4 Canada market estimates and forecast, by end-use industry, 2013-2024, (Kilo Tons) (USD Million)
7.3 Europe
7.3.1 Europe market estimates and forecast, 2013 – 2024, (Kilo Tons) (USD Million)
7.3.2 Europe market estimates and forecast, by material, 2013-2024, (Kilo Tons) (USD Million)
7.3.3 Europe market estimates and forecast, by process, 2013-2024, (Kilo Tons) (USD Million)
7.3.4 Europe market estimates and forecast, by end-use industry, 2013-2024, (Kilo Tons) (USD Million)
7.3.5 Germany
7.3.5.1 Germany market estimates and forecast, 2013 – 2024, (Kilo Tons) (USD Million)
7.3.5.2 Germany market estimates and forecast, by material, 2013-2024, (Kilo Tons) (USD Million)
7.3.5.3 Germany market estimates and forecast, by process, 2013-2024, (Kilo Tons) (USD Million)
7.3.5.4 Germany market estimates and forecast, by end-use industry, 2013-2024, (Kilo Tons) (USD Million)
7.3.6 UK
7.3.6.1 UK market estimates and forecast, 2013 – 2024, (Kilo Tons) (USD Million)
7.3.6.2 UK market estimates and forecast, by material, 2013-2024, (Kilo Tons) (USD Million)
7.3.6.3 UK market estimates and forecast, by process, 2013-2024, (Kilo Tons) (USD Million)
7.3.6.4 UK market estimates and forecast, by end-use industry, 2013-2024, (Kilo Tons) (USD Million)
7.3.7 France
7.3.7.1 France market estimates and forecast, 2013 – 2024, (Kilo Tons) (USD Million)
7.3.7.2 France market estimates and forecast, by material, 2013-2024, (Kilo Tons) (USD Million)
7.3.7.3 France market estimates and forecast, by process, 2013-2024, (Kilo Tons) (USD Million)
7.3.7.4 France market estimates and forecast, by end-use industry, 2013-2024, (Kilo Tons) (USD Million)
7.3.8 Italy
7.3.8.1 Italy market estimates and forecast, 2013 – 2024, (Kilo Tons) (USD Million)
7.3.8.2 Italy market estimates and forecast, by material, 2013-2024, (Kilo Tons) (USD Million)
7.3.8.3 Italy market estimates and forecast, by process, 2013-2024, (Kilo Tons) (USD Million)
7.3.8.4 Italy market estimates and forecast, by end-use industry, 2013-2024, (Kilo Tons) (USD Million)
7.3.9 Russia
7.3.9.1 Russia market estimates and forecast, 2013 – 2024, (Kilo Tons) (USD Million)
7.3.9.2 Russia market estimates and forecast, by material, 2013-2024, (Kilo Tons) (USD Million)
7.3.9.3 Russia market estimates and forecast, by process, 2013-2024, (Kilo Tons) (USD Million)
7.3.9.4 Russia market estimates and forecast, by end-use industry, 2013-2024, (Kilo Tons) (USD Million)
7.3.10 Poland
7.3.10.1 Poland market estimates and forecast, 2013 – 2024, (Kilo Tons) (USD Million)
7.3.10.2 Poland market estimates and forecast, by material, 2013-2024, (Kilo Tons) (USD Million)
7.3.10.3 Poland market estimates and forecast, by process, 2013-2024, (Kilo Tons) (USD Million)
7.3.10.4 Poland market estimates and forecast, by end-use industry, 2013-2024, (Kilo Tons) (USD Million)
7.4 Asia Pacific
7.4.1 Asia Pacific market estimates and forecast, 2013 – 2024, (Kilo Tons) (USD Million)
7.4.2 Asia Pacific market estimates and forecast, by material, 2013-2024, (Kilo Tons) (USD Million)
7.4.3 Asia Pacific market estimates and forecast, by process, 2013-2024, (Kilo Tons) (USD Million)
7.4.4 Asia Pacific market estimates and forecast, by end-use industry, 2013-2024, (Kilo Tons) (USD Million)
7.4.5 China
7.4.5.1 China market estimates and forecast, 2013 – 2024, (Kilo Tons) (USD Million)
7.4.5.2 China market estimates and forecast, by material, 2013-2024, (Kilo Tons) (USD Million)
7.4.5.3 China market estimates and forecast, by process, 2013-2024, (Kilo Tons) (USD Million)
7.4.5.4 China market estimates and forecast, by end-use industry, 2013-2024, (Kilo Tons) (USD Million)
7.4.6 India
7.4.6.1 India market estimates and forecast, 2013 – 2024, (Kilo Tons) (USD Million)
7.4.6.2 India market estimates and forecast, by material, 2013-2024, (Kilo Tons) (USD Million)
7.4.6.3 India market estimates and forecast, by process, 2013-2024, (Kilo Tons) (USD Million)
7.4.6.4 India market estimates and forecast, by end-use industry, 2013-2024, (Kilo Tons) (USD Million)
7.4.7 Japan
7.4.7.1 Japan market estimates and forecast, 2013 – 2024, (Kilo Tons) (USD Million)
7.4.7.2 Japan market estimates and forecast, by material, 2013-2024, (Kilo Tons) (USD Million)
7.4.7.3 Japan market estimates and forecast, by process, 2013-2024, (Kilo Tons) (USD Million)
7.4.7.4 Japan market estimates and forecast, by end-use industry, 2013-2024, (Kilo Tons) (USD Million)
7.4.8 South Korea
7.4.8.1 South Korea market estimates and forecast, 2013 – 2024, (Kilo Tons) (USD Million)
7.4.8.2 South Korea market estimates and forecast, by material, 2013-2024, (Kilo Tons) (USD Million)
7.4.8.3 South Korea market estimates and forecast, by process, 2013-2024, (Kilo Tons) (USD Million)
7.4.8.4 South Korea market estimates and forecast, by end-use industry, 2013-2024, (Kilo Tons) (USD Million)
7.4.9 Australia
7.4.9.1 Australia market estimates and forecast, 2013 – 2024, (Kilo Tons) (USD Million)
7.4.9.2 Australia market estimates and forecast, by material, 2013-2024, (Kilo Tons) (USD Million)
7.4.9.3 Australia market estimates and forecast, by process, 2013-2024, (Kilo Tons) (USD Million)
7.4.9.4 Australia market estimates and forecast, by end-use industry, 2013-2024, (Kilo Tons) (USD Million)
7.5 Latin America
7.5.1 Latin America market estimates and forecast, 2013 – 2024, (Kilo Tons) (USD Million)
7.5.2 Latin America market estimates and forecast, by material, 2013-2024, (Kilo Tons) (USD Million)
7.5.3 Latin America market estimates and forecast, by process, 2013-2024, (Kilo Tons) (USD Million)
7.5.4 Latin America market estimates and forecast, by end-use industry, 2013-2024, (Kilo Tons) (USD Million)
7.5.5 Brazil
7.5.5.1 Brazil market estimates and forecast, 2013 – 2024, (Kilo Tons) (USD Million)
7.5.5.2 Brazil market estimates and forecast, by material, 2013-2024, (Kilo Tons) (USD Million)
7.5.5.3 Brazil market estimates and forecast, by process, 2013-2024, (Kilo Tons) (USD Million)
7.5.5.4 Brazil market estimates and forecast, by end-use industry, 2013-2024, (Kilo Tons) (USD Million)
7.5.6 Argentina
7.5.6.1 Argentina market estimates and forecast, 2013 – 2024, (Kilo Tons) (USD Million)
7.5.6.2 Argentina market estimates and forecast, by material, 2013-2024, (Kilo Tons) (USD Million)
7.5.6.3 Argentina market estimates and forecast, by process, 2013-2024, (Kilo Tons) (USD Million)
7.5.6.4 Argentina market estimates and forecast, by end-use industry, 2013-2024, (Kilo Tons) (USD Million)
7.5.7 Mexico
7.5.7.1 Mexico market estimates and forecast, 2013 – 2024, (Kilo Tons) (USD Million)
7.5.7.2 Mexico market estimates and forecast, by material, 2013-2024, (Kilo Tons) (USD Million)
7.5.7.3 Mexico market estimates and forecast, by process, 2013-2024, (Kilo Tons) (USD Million)
7.5.7.4 Mexico market estimates and forecast, by end-use industry, 2013-2024, (Kilo Tons) (USD Million)
7.6 Middle East & Africa
7.6.1 Middle East & Africa market estimates and forecast, 2013 – 2024, (Kilo Tons) (USD Million)
7.6.2 Middle East & Africa market estimates and forecast, by material, 2013-2024, (Kilo Tons) (USD Million)
7.6.3 Middle East & Africa market estimates and forecast, by process, 2013-2024, (Kilo Tons) (USD Million)
7.6.4 Middle East & Africa market estimates and forecast, by end-use industry, 2013-2024, (Kilo Tons) (USD Million)
7.6.5 Saudi Arabia
7.6.5.1 Saudi Arabia market estimates and forecast, 2013 – 2024, (Kilo Tons) (USD Million)
7.6.5.2 Saudi Arabia market estimates and forecast, by material, 2013-2024, (Kilo Tons) (USD Million)
7.6.5.3 Saudi Arabia market estimates and forecast, by process, 2013-2024, (Kilo Tons) (USD Million)
7.6.5.4 Saudi Arabia market estimates and forecast, by end-use industry, 2013-2024, (Kilo Tons) (USD Million)
7.6.6 UAE
7.6.6.1 UAE market estimates and forecast, 2013 – 2024, (Kilo Tons) (USD Million)
7.6.6.2 UAE market estimates and forecast, by material, 2013-2024, (Kilo Tons) (USD Million)
7.6.6.3 UAE market estimates and forecast, by process, 2013-2024, (Kilo Tons) (USD Million)
7.6.6.4 UAE market estimates and forecast, by end-use industry, 2013-2024, (Kilo Tons) (USD Million)
7.6.7 South Africa
7.6.7.1 South Africa market estimates and forecast, 2013 – 2024, (Kilo Tons) (USD Million)
7.6.7.2 South Africa market estimates and forecast, by material, 2013-2024, (Kilo Tons) (USD Million)
7.6.7.3 South Africa market estimates and forecast, by process, 2013-2024, (Kilo Tons) (USD Million)
7.6.7.4 South Africa market estimates and forecast, by end-use industry, 2013-2024, (Kilo Tons) (USD Million)
Chapter 8 Company Profiles
8.1 A&A Thermal Spray Coatings
8.1.1 Business Overview
8.1.2 Product Landscape
8.1.3 SWOT Analysis
8.2 Flame Spray Coating Co.
8.2.1 Business Overview
8.2.2 Product Landscape
8.2.3 SWOT Analysis
8.3 General Magnaplate Corporation
8.3.1 Business Overview
8.3.2 Product Landscape
8.3.3 SWOT Analysis
8.4 Praxair Surface Technologies
8.4.1 Business Overview
8.4.2 Financial Data
8.4.3 Product Landscape
8.4.4 Strategic Outlook
8.4.5 SWOT Analysis
8.5 Oerlikon Metco
8.5.1 Business Overview
8.5.2 Financial Data
8.5.3 Product Landscape
8.5.4 Strategic Outlook
8.5.5 SWOT Analysis
8.6 Plasma-Tec
8.6.1 Business Overview
8.6.2 Product Landscape
8.6.3 SWOT Analysis
8.7 Surface Technology
8.7.1 Business Overview
8.7.2 Product Landscape
8.7.3 Strategic Outlook
8.7.4 SWOT Analysis
8.8 H.C. Starck GmbH
8.8.1 Business Overview
8.8.2 Product Landscape
8.8.3 Strategic Outlook
8.8.4 SWOT Analysis
8.9 ASB Industries
8.9.1 Business Overview
8.9.2 Product Landscape
8.9.3 SWOT Analysis
8.10 Metallisation Ltd.
8.10.1 Business Overview
8.10.2 Financial Data
8.10.3 Product Landscape
8.10.4 SWOT Analysis
8.11 MesoCoat, Inc. Coating
8.11.1 Business Overview
8.11.2 Product Landscape
8.11.3 Strategic Outlook
8.11.4 SWOT Analysis
8.12 Cincinnati Thermal Spray Inc.
8.12.1 Business Overview
8.11.2 Product Landscape
8.11.3 Strategic Outlook
8.11.4 SWOT Analysis
8.13 Thermion Inc.
8.13.1 Business Overview
8.13.2 Product Landscape
8.13.3 SWOT Analysis
8.14 Air Products and Chemicals, Inc.
8.14.1 Business Overview
8.14.2 Financial Data
8.14.3 Product Landscape
8.14.4 SWOT Analysis
8.15 Bodycote PLC
8.15.1 Business Overview
8.15.2 Financial Data
8.15.3 Product Landscape
8.15.4 Strategic Outlook
8.15.5 SWOT Analysis
8.16 Saint-Gobain
8.16.1 Business Overview
8.16.2 Financial Data
8.16.3 Product Landscape
8.16.4 Strategic Outlook
8.16.5 SWOT Analysis
8.17 Sandvik AB
8.17.1 Business Overview
8.17.2 Financial Data
8.17.3 Product Landscape
8.17.4 SWOT Analysis

Browse full Table of Content @ https://www.gminsights.com/toc/detail/thermal-spray-coating-market

About Global Market Insights
Global Market Insights, Inc., headquartered in Delaware, U.S., is a global market research and consulting service provider; offering syndicated and custom research reports along with growth consulting services. Our business intelligence and industry research reports offer clients with penetrative insights and actionable market data specially designed and presented to aid strategic decision making. These exhaustive reports are designed via a proprietary research methodology and are available for key industries such as chemicals, advanced materials, technology, renewable energy and biotechnology

Contact Us
Arun Hegde
Corporate Sales, USA
Global Market Insights, Inc.
Phone: 1-302-846-7766
Toll Free: 1 888-689-0688
Email: sales@gminsights.com
Web: https://www.gminsights.com

This release was published on openPR.