Press release
On-Site Ethanol in Gasoline Blend Measurements in Under a Minute
InfraCal Ethanol Blend Analyzer in Use at Fuel Terminal
The InfraCal Ethanol Blend Analyzer is a low-cost analyzer that weighs less than 5 lbs. and can be operated from a battery pack or cigarette lighter adapter cable. It is self-contained with an internal calibration program and direct readout display. It can be supplied with a printer and includes RS 232 interface that allows for data transmission to a PC. The InfraCal Ethanol Blend Analyzer is ideal for use in laboratories or in a rugged environment where a single, repetitive analysis is needed. It is currently being used by many major oil companies.
For further information on the InfraCal Biodiesel Blend Analyzer for measuring blend ratio, please contact: Wilks Enterprise, Inc., 25 Van Zant Street Ste. 8F, E. Norwalk, CT 06855 USA, TEL: 203-855-9136, FAX: 203-838-9868, Email: info@wilksir.com, Web Site -- www.wilksir.com or download literature directly at
http://wilksir.com/biofuel-analyzers/infracal-hatr-t2e.html.
For further press information or images, please contact Carol Tunick, VP – Marketing, at 203-855-9136 or email:ctunick@wilksir.com. Wilks and InfraCal are trademarks of Wilks Enterprise, Inc.
About Wilks Enterprise, Inc.
Headquartered in E. Norwalk, Connecticut, Wilks Enterprise specializes in easy-to-use, portable mid-infrared analyzers for specific measurement applications. All Wilks analyzers have been specifically designed for on-site use by non-technical personnel and are used for a wide variety of applications in the biofuels, environmental, petrochemical, quality control, and manufacturing industries. These portable analyzers enable analytical measurements to be made in the field, helping to eliminate the wait for off-site lab results.
Carol K. Tunick
Wilks Enterprise, Inc.
25 Van Zant Street, Ste. 8F
E. Norwalk, CT 06855
Email: ctunick@wilksir.com
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release On-Site Ethanol in Gasoline Blend Measurements in Under a Minute here
News-ID: 175478 • Views: …
More Releases from Wilks Enterprise, Inc.
New Videos demonstrate the ease of using Portable Infrared Analyzers for On-Site …
Wilks Enterprise is pleased to announce several new videos that demonstrate the ease of using portable infrared analyzers for measuring the level of total oil and grease in water/soil. These short videos show how on-site measurements with the InfraCal TOG/TPH Analyzers take just a few simple steps to obtain accurate part per million (ppm) results in under 15 minutes. They are readily used by non-technical personnel and eliminate the…
Accurately Measure Hydrocarbon (Oil/Grease) Levels in Produced Water in Under 15 …
E. Norwalk, CT, March 29, 2012 -- Determining total hydrocarbon or oil/grease levels to ensure compliance with regulatory permit requirements for discharging produced water is a worldwide problem facing the oil and gas industry. Ensuring compliance with these regulations and avoiding fines for non-compliant discharges requires more frequent wastewater measurements to determine the total hydrocarbon concentration. The portable InfraCal TOG/TPH Analyzers manufactured by Wilks Enterprise, Inc.…
On-Site Measurement of Oil and Grease Levels in Hydraulic Fracturing Water
The amount of water used in and produced by hydraulic fracturing of shale gas wells is in the millions of gallons per well. Whether the water is going to be taken off-site for disposal or reused for re-injection, the flowback or produced water needs pretreatment to remove any residual oil from the water. Waiting for remote laboratory results to determine the oil level can take several days to…
Effects of Biodiesel Feedstocks on Infrared Blend Measurements is Featured in Ne …
A new White Paper published by Wilks Enterprise addresses the common concern among biodiesel blenders and distributors as to whether or not biodiesel made from different feedstocks such as soy, waste vegetable oil or palm oil will affect the blend measurement. The data presented in the White Paper, as well as the chemistry, shows that infrared measurements offer a reliable analytical technique for checking biodiesel blend.
Fuel blend analysis is…
More Releases for InfraCal
New Videos demonstrate the ease of using Portable Infrared Analyzers for On-Site …
Wilks Enterprise is pleased to announce several new videos that demonstrate the ease of using portable infrared analyzers for measuring the level of total oil and grease in water/soil. These short videos show how on-site measurements with the InfraCal TOG/TPH Analyzers take just a few simple steps to obtain accurate part per million (ppm) results in under 15 minutes. They are readily used by non-technical personnel and eliminate the…
Accurately Measure Hydrocarbon (Oil/Grease) Levels in Produced Water in Under 15 …
E. Norwalk, CT, March 29, 2012 -- Determining total hydrocarbon or oil/grease levels to ensure compliance with regulatory permit requirements for discharging produced water is a worldwide problem facing the oil and gas industry. Ensuring compliance with these regulations and avoiding fines for non-compliant discharges requires more frequent wastewater measurements to determine the total hydrocarbon concentration. The portable InfraCal TOG/TPH Analyzers manufactured by Wilks Enterprise, Inc.…
On-Site Measurement of Oil and Grease Levels in Hydraulic Fracturing Water
The amount of water used in and produced by hydraulic fracturing of shale gas wells is in the millions of gallons per well. Whether the water is going to be taken off-site for disposal or reused for re-injection, the flowback or produced water needs pretreatment to remove any residual oil from the water. Waiting for remote laboratory results to determine the oil level can take several days to…
Effects of Biodiesel Feedstocks on Infrared Blend Measurements is Featured in Ne …
A new White Paper published by Wilks Enterprise addresses the common concern among biodiesel blenders and distributors as to whether or not biodiesel made from different feedstocks such as soy, waste vegetable oil or palm oil will affect the blend measurement. The data presented in the White Paper, as well as the chemistry, shows that infrared measurements offer a reliable analytical technique for checking biodiesel blend.
Fuel blend analysis is…
New Easy-to-Use ASTM Test Method for Measuring Soot Levels in Diesel Engine Lubr …
E. Norwalk, CT June 30, 2011 – Wilks Enterprise is pleased to announce that the InfraCal Soot Meter now gives users an approved ASTM testing method for measuring the percent level of soot in diesel engine lubricating oil. In late June, ASTM issued Method D7686-2011 entitled “Test Method for Field-Based Condition Monitoring of Soot in In-Service Lubricants Using a Fixed-Filter Infrared (IR) instrument.”
With the InfraCal Soot Meter, rapid,…
New Video features Portable Infrared Analyzers for On-Site Measurement of Oil in …
East Norwalk, CT, June 10, 2011 – Wilks Enterprise is pleased to announce a new video featuring the measurement of oil and grease in water/soil with easy-to-use portable infrared analyzers. This 3-minute video demonstrates how on-site measurements with the InfraCal TOG/TPH Analyzers can save time and money, as they allow oil and grease levels in wastewater to be determined in under 15 minutes. These measurements help ensure compliance…
