openPR Logo
Press release

esd electronics, Inc releases VME Carrier Board for PMC Modules

09-19-2009 12:52 PM CET | Industry, Real Estate & Construction

Press release from: esd electronics, Inc

VME-PMC-CADDY

VME-PMC-CADDY

esd electronics, Inc. announces the release of the VME-PMC-CADDY developed to allow the upgrade of established VME computer systems to newer-technology PMC boards. This module provides a perfect solution for extending the life of existing VME systems, or even replacing discontinued VME components.

The VME-PMC-CADDY is a VME64-based board carrying up to two PMC modules of any kind. The board uses the Tundra UNIVERSE CA91C142 PCI bridge with an internal clock rate of 33 MHz that allows it to operate as either a slave or master. In the “master mode”, it supports a 4-level arbiter. It operates with a data width of up to 32 bits and supports 32 address signals on the VMEbus. Seven interrupt request lines are available for the application of the VMEbus interrupt. Two 160-pin VG connectors connect the board to the VMEbus on VME64 extensions according to IEC603-xx.

Designed according to IEEE P1386/Draft 2.0 (except for the standard I/O pin routing), both PMC plug-in units allow the use of any PMC modules available in the market.

esd electronics, Inc offers software drivers plus sample C source code libraries available for real time operating systems such as VxWorks and OS-9. Drivers for other operating systems are available on request.

esd electronics, Inc. has over 20 years experience in VME development and production. They specialize in re-engineering discontinued VME boards. As an experienced system integrator, we use the highest industrial standards to realize customer-specific developments in hardware & software with consideration for special requirements. esd electronics also focuses on Controller Area Network (CAN) technologies with hardware interfaces including PCI, CompactPCI, PC104, PMC, PCIExpress, gateways to USB, Ethernet, & Profibus with drivers and CANopen/DeviceNet APIs supporting Windows, LINUX, & VxWorks. We offer an IEC 61131-3 programming interface.

For further information contact:
North American Headquarters
esd electronics, Inc
Michelle Dzialo
Sales Manager, esd electronics, Inc USA
413-772-3170
us-sales@esd-electronics.com

European Headquarters
esd electronic system design gmbh
Vahrenwalder Str. 207
D-30165 Hannover
Germany
+49-511-37298-0
info@esd-electronics.com

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release esd electronics, Inc releases VME Carrier Board for PMC Modules here

News-ID: 97372 • Views: 1296

More Releases from esd electronics, Inc

PMC PowerPC Board with Gigabit Ethernet, USB and CAN
The PMC-CPU/440 is a PCI Mezzanine Card that automatically switches to monarch (PrPMC) or non-monarch mode ac-cording to the system’s requirements. The PowerPCTM AMCC PPC440EPx with 533 MHz or 667 MHz enables a performance of 1334 DMIPS peak, is equipped with at least 256 Mbyte DDR2 RAM and 256 Mbyte NAND Flash, and offers system time sup¬port by RTC (with double layer capacitor) or IRIG-B. For CAN bus synchronization tasks,
esd electronics, Inc announces the release of its newest software product, the e …
esd electronics, Inc SAE J1939 is a Controller Area Network (CAN) [ISO11898] based protocol developed to provide a standard architecture through which multiple Electronic Control Units (ECUs) on a vehicle can communicate. Based on the extended frame format (29-bit identifier) of the CAN 2.0B specification, it uses a fixed baud rate of 250 Kbit/s. The esd J1939 Stack design allows quick development of applications supporting the SAE J1939 protocol. Written in
EtherCAT Master Software For Embedded Operating Systems
esd electronics, Inc. announces the release of the newest product in their EtherCAT® product line, an EtherCAT® Master software for Windows, Linux, QNX, and vxWorks. EtherCAT® is an Ethernet-based fieldbus protocol optimized for high-speed, real-time industrial control based on a Master/Slave configuration. For instance, process data exchange with 1000 distributed digital I/O requires approximately thirty micro-seconds. Data for 100 servo axes can be updated with a frequency of up to 10
Fieldbus Conference 2009 includes EtherCAT Seminar
esd electronics, Inc announces their 2nd annual Fieldbus Conference on October 8, 2009 at the beautiful Warren Center near Boston! This year’s conference revolves around industrial networking technologies; with the focus on EtherCAT, an extremely fast and reliable fieldbus system based on Ethernet. EtherCAT, as well as other Ethernet-based systems, are challenging established technologies such as, CANopen, DeviceNet, and others. Industrial Ethernet technologies are a formidable challenge to CAN and CANopen as

All 5 Releases


More Releases for VME

Global VME Single Board Computer Industry Market Analysis & Forecast 2018-2023
Global VME Single Board Computer Industry Market Research surveying report conveys a nearby watch on driving contenders with the vital investigation, small-scale, and large-scale showcase pattern and situations, estimating examination and a comprehensive outline of the market circumstances in the figure time frame. Global VME Single Board Computer Industry Market is an expert and a definite report concentrating on essential and optional drivers, piece of the overall industry Get sample copy
VME Single Board Computer Market Size, Share, Trends Analysis Report By Product, …
UpMarketResearch offers a latest published report on “Global VME Single Board Computer Market Industry Analysis and Forecast 2018-2023” delivering key insights and providing a competitive advantage to clients through a detailed report. The report contains 117 pages which highly exhibits on current market analysis scenario, upcoming as well as future opportunities, revenue growth, pricing and profitability. VME Single Board Computer market research report delivers a close watch on leading competitors
VME Single Board Computer Market Analysis- Size, Share, overview, scope, Revenue …
ReportBazzar announces the addition of new study based research report on VME Single Board Computer market to their suite of offerings. Where the VME Single Board Computer market is heading? If you are involved in VME Single Board Computer sector, the report brings to your attention a basic overview of the VME Single Board Computer market with market definition, classification, applications, segmentation, plans, manufacturing processes, product specifications, cost structures, regional analysis,
Global VME Single Board Computer Market 2017 : THEMIS, EUROTECH, HiScience, Hich …
A market study based on the "VME Single Board Computer Market" across the globe, recently added to the repository of Market Research, is titled ‘Global VME Single Board Computer Market 2017’. The research report analyses the historical as well as present performance of the worldwide VME Single Board Computer industry, and makes predictions on the future status of VME Single Board Computer market on the basis of this analysis. Get Free
ibaLink-VME connects iba components to common controllers
For users of VMEbus based controllers, iba AG based in Fuerth (Northern Bavaria) has innovated the proven ibaLink module fundamentally. Due to the now higher performance of the module, it is possible to read the control data of established suppliers of automation technology at cycle speeds of up to 25 µs in real time and further process these data. Compared to the successful predecessor ibaLink-SM-128V-i-2o, the number of signals which
Kontron’s chassis monitoring board CMB enables effective condition monitoring …
Eching, Germany, September 12, 2011 – The new Kontron chassis monitoring board CMB is a unified solution for VPX and VME systems to streamline system monitoring and management of rugged applications. The Kontron CMB centralizes out-of-band monitoring and management of installed boards and relevant system parameters such as temperature, airflow and power supply in mission-critical COTS systems with high demands on reliability, availability and ruggedness. OEMs and system developers will