Prosperity of Industrialization to Drive Automotive Catalytic Converter Market During 2017 – 2027
The automotive catalytic converter is a device used to convert toxic emissions and pollutants in the exhaust gases produced by an internal combustion engine into less harmful gases by the method of catalyzing a redox reaction. Catalytic converters are used in engines powered with both, diesel and gasoline (petrol), in all vehicle types (PCV, LCV and HCV) as well as in lean burn engines, kerosene stoves and heaters. The automotive catalytic converter was first introduced in the U.S. automobile market as a measure to comply with the U.S. energy protection agency’s stringent rules and regulations for emission of toxic exhaust gases. The two-way catalytic converter combines carbon monoxide (CO) with oxygen and unburned hydrocarbons to produce water and carbon dioxide. From the 1980’s, two-way automotive catalytic converters were rendered outdated by three-way catalytic converters, which are also capable of reducing nitrogen oxides (NOx); nevertheless, two-way catalytic converters are still used in lean-burn engines but not in automobiles.
Some of the prominent factors influencing growth of the automotive catalytic converter market are the increasing vehicle production globally and the need for enhancement of safety features. An automotive catalytic converter has to be changed every 100,000 to 120,000 kilometers so it can perform efficiently. Thus, an automotive catalytic converter is one of the prominent aftermarket components in the global automotive market. As these converters have a good replacement rate, by sales channel, the aftermarket segment is estimated to grow with a prominent pace over the forecast period in the global market.
A sample of this report is available upon request @ https://www.futuremarketinsights.com/reports/sample/rep-gb-5431
Automotive Catalytic Converter Market: Dynamics
Automotive catalytic converters used in the exhaust systems of all automobiles are in high demand globally. The demand for catalytic converters in the global market is estimated to grow with an incremental rate in the coming years. Selective catalytic reduction converters are expected to hold a prominent market share in terms of value and volume during the forecast period in the global automotive catalytic converter market, owing to the stringent rules and regulation imposed to reduce the harmful emissions from vehicles. This increasing growth of automotive catalytic converters is directly proportionate to global vehicle production.
The most prominent factors accelerating the growth of automotive catalytic converters in the global market include manufacturing, introduction of advanced technology and clean transportation. New rules and regulations enforced by governments and ruling authorities regarding the safety of the environment encourage manufacturers to produce environment-friendly and efficient vehicles, which has subsequently resulted in an increase in the demand for automotive catalytic converters in the global market. High cost of technology and fluctuating prices are acting as key restraints countering growth of the global automotive catalytic converter market. A decline in vehicle production will downsize the global automobile catalytic converter market. Electrification of vehicles can also hamper growth of the automotive catalytic converter market as pure electric vehicles do not require catalytic converters.
Automotive Catalytic Converter Market: Segmentation
The automotive catalytic converter market can be segmented on the basis of product type, application, electric vehicle, sales channel, traction connector and vehicle type.
By product type:
Three-way catalytic converter
Diesel Oxidation catalytic converter
Selective catalytic reduction
Lean NOx trap
By sales channel:
Original Equipment Manufacturer (OEM)
Automotive Catalytic Converter Market: Regional Outlook
Asia-Pacific is estimated to hold a prominent share of the automotive catalytic converter market. Developing countries, such as India and China, are significant players boosting the demand for automobiles, which in turn is supporting growth of the automobile catalytic converter market. Furthermore, automation and technological advancement are propelling demand for the global automobile catalytic converter market. Europe, North America and the Middle East and Africa are continuously witnessing infrastructural growth, which in turn is surging demand for automobiles. Attributing to this, the automotive catalytic converter market is estimated to grow significantly in the coming future in these regions.
To view TOC of this report is available upon request @ https://www.futuremarketinsights.com/reports/sample/rep-gb-5431
Automotive Catalytic Converter Market: Market Participants
Examples of some of the market participants in the global automotive catalytic converter market are:
Benteler International AG
Magneti Marelli S.p.A.
Cats & Pipes Ltd
HJS Emission Technology
The research report presents a comprehensive assessment of the market and contains thoughtful insights, facts, historical data, and statistically supported and industry-validated market data. It also contains projections using a suitable set of assumptions and methodologies. The research report provides analysis and information according to market segments such as geographies, application, and industry.
Future Market Insights (FMI) is a leading market intelligence and consulting firm. We deliver syndicated research reports, custom research reports and consulting services, which are personalized in nature. FMI delivers a complete packaged solution, which combines current market intelligence, statistical anecdotes, technology inputs, valuable growth insights, an aerial view of the competitive framework, and future market trends.
Mr. Sudip Saha
Future Market Insights
616 Corporate Way,
New York 10989,
This release was published on openPR.
Permanent link to this press release:
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Prosperity of Industrialization to Drive Automotive Catalytic Converter Market During 2017 – 2027 here
News-ID: 880817 • Views: 137
More Releases from Future Market Insights
How Changing Dynamics of Cable Testing Market are Reflecting on Growth Strategie …
Global Cable Testing Market: Introduction The cost of the substitution of cables that are concealed is very high. Faults in the cable, bending, kinking, and crushing, are not always visible, which has created the requirement for cable testing. Thus, cable testing helps check the cable functionality, cable quality, and cable conformity. Several times, cable testing by visual inspection is an effective way of identifying the actual problem before it causes any
How Transformative Trends in Self-Organising Network Market are Molding Strategi …
Self-Organising Network: Introduction With accelerated advancements and increasing complexities in the radio network technologies, such as those utilised for the development of LTE and 5G networks, which are used for planning, management, configuration, healing and optimisation, are required to be automated to facilitate efficiency. At present, suppliers are offering self-organising networks that possess the ability to offer optimum performance. Self-organising networks are use cases that perform network governance, including network planning,
Mining Vehicle AC Kits Market: Exploring the Impact of Trends on Strategies of K …
Mining Vehicle AC Kits Market: Introduction Cabin space in mining equipment has become more sophisticated in the recent past. The installation of mining vehicle AC kits has evolved from an optional feature to a necessary feature. Mining equipment manufacturers have made advancements in technology related to efficiency, performance and cost of air conditioning systems in order to make them affordable and economical to enable low-budget and compact installations without compromising on
Key Factors to Fuel Growth of the Talent Acquisition & Staffing Technology and S …
With the growing importance of recruiting and retaining top talent effectively and efficiently, smart hiring processes are the need of the hour. It is about time organisations move beyond merely scrutinising resumes. Salaries and benefits are important factors, but adopting ways that would make candidates an important part of the hiring process will attract the best talent. Studies reveal that due to discrepancies in existing Applicant Tracking Systems (ATS), hiring
More Releases for Automotive
Automotive Sunroof Market
Automotive Sunroof is a fixed or operable opening in vehicle that allows light or fresh air to enter inside a car. Sunroof are of many shapes and sizes and styles and they are either manually driver or motor driven. Increasing demand for premium cars and growing need to control light inside the vehicle is fueling the growth of automotive sunroof market. The major driver influencing the growth of automotive sunroof is
Automotive MEMS Sensor
The Insight Partners added “Laser Technology Market to 2025” to its research database. The report is spread across 150 pages and supported by 10 company leaders. A laser is a coherent and focused beam of photons; coherent, in this context, means that it is all one wavelength, unlike ordinary light which showers on us in many wavelengths. Laser technology is used for an extensive range of professional field measurement applications which
Automotive Air Filter Market
An automotive air filter is a device that is made up of fibrous materials that removes solid particulates like pollen, dust, bacteria, and mould from the intake air. A chemical type of air filter consist of a catalyst or absorbent for removing molecular contaminants like ozone or volatile organic compounds. Air filters are being used in applications where air quality is of vital importance, notably in building ventilation systems and
Automotive Fasteners Market
Fasteners are the mechanical components that holds, joins or affixes two or more parts together, automotive industry is the largest market for the fastener. Automotive fasteners are made up of various materials such as Iron, Aluminum, Brass, Nickel, Stainless steel, Plastic, they are further classified with their distinct characteristics. Automotive fasteners are generally used for the clamping parts of vehicle together to avoid their separation or wobbling, transmitting loads as
Automotive Tires Market
The automotive tires play a very important role in vehicle performance along with the vehicle engine. A tire should be fine enough to carry vehicle weight and pressure on any road with superior breaking performances. The manufacturers focus on enhancing the production and performance capabilities of tires to meet with the growing demands of OEMs as well as secondary market.The automotive tires market is expected to grow rapidly in the
Automotive Actuators Market 2017 - AK, FTE automotive
MarketReports.biz’s Automotive Actuators market research report provides the newest industry data and industry future trends, allowing you to identify the products and end users driving Revenue growth and profitability. The industry report lists the leading competitors and provides the insights strategic industry Analysis of the key factors influencing the market. Request for sample @ https://goo.gl/auN0LC The Players mentioned in our report AK FTE automotive The report includes the forecasts, Analysis and discussion of important industry trends,